|
|
General Solution of Valvetrain Mechanical Losses
Mynařík, Aleš ; Maršálek, Ondřej (referee) ; Novotný, Pavel (advisor)
This master's thesis deals with the determination of mechanical losses in the valvetrain of the combustion engine. It describes the computational and experimental methods of determining the mechanical losses of valve mechanism. The practical part of the thesis focuses on the programing of structures in Matlab. This application calculates the values of mechanical losses of valvetrain and displays their graphical representation. This program is used for computing the mechanical losses of the selected real engine.
|
|
|
CFD simulation of refrigerant flow inside the semihermetic compressor
Tuhovčák, Ján ; Knotek, Stanislav (referee) ; Katolický, Jaroslav (advisor)
The CFD simulation of cooling piston compressor Stream, manufactured by Emerson company, is the topic of this diploma thesis. Analysis of moving parts (piston, valves) and refrigerant or physical settings for simulation were based on experimental data provided by Emerson. The goal of the thesis is to test opportunities of Star-CCM+ in simulating the flow inside the compressor. In the end there will be a comparison of experimental data and results from the simulation. The thesis also contains a theoretical background of piston compressors and phenomenon following the operating compressor.
|
|
| |
|
|
Study of diaphragm pump with linear motor
Dubový, Ľuboš ; Habán, Vladimír (referee) ; Pochylý, František (advisor)
The content of this master‘s thesis is a study of diaphragm pump with linear drive. Linear motor was used as the linear drive. Thesis is well – founded by theoretic calculation of pump and its design draft. Likewise, the thesis includes optimalization of suction, or pressure, valve for pump, created by using computer fluid dynamics software. Thesis is complemented by basic view of different types of pumps based on the classification by hydrodynamic and hydrostatic pumps. Subsequently, the preview of blood – flow pumps is presented.
|
|
|
Fluid power heating system
Paták, Jiří ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The theoretical part deal with problematic of fluid power heating system. The experimental part deal with measurement of the characteristic of circulation pump and measurement of valves - ball valve. The project solves the heating and hot water preparing for the new administrative building in Žďár nad Sázavou. The building has 3 floors. As a source of heat for the winter season is designed gas boiler, for hot water preparing is also used the same gas boiler. The heat source is placed in a separately accessible room.
|
|
|
Control system for material weighing
Komárek, David ; Zezulka, František (referee) ; Bradáč, Zdeněk (advisor)
The scope of this work is the broad issue of bulk materials weighing, partialy the conception design of control and vizualization blocks involved in weighing systems. The first part of this thesis aims at the theoretical analysis of template technology to introduce readers with issues of bulk materials weighing. The second part consist of conception design for object description of control and vizualization blocks of selected components for Step 7 and WinCC development environment. The final part focuses on experience and information gained during process of system blocks implementation.
|
|
|
Automation of track for measurement of water valves characteristics
Lekeš, Pavel ; Havlíková, Marie (referee) ; Šedivá, Soňa (advisor)
My diploma thesis describes upgrade of flowbench serving as test rig for regulation valves characteristic measurement. At the beggining, there is an introduction to the water regulation valves theory followed by current machine condition description. Next chapter defines needed improvements and at the end follows proposition of improvements and necessary component definition and final realization. Final chapter summarizes complete project.
|
|
|
Automation of track for measurement of water valves characteristics
Lekeš, Pavel ; Havránek, Zdeněk (referee) ; Šedivá, Soňa (advisor)
My diploma thesis describes upgrade of flowbench serving as test rig for regulation valves characteristic measurement. At the beggining, there is an introduction to the water regulation valves theory followed by current machine condition description. Next chapter defines needed improvements and at the end follows proposition of improvements and necessary component definition and final realization. Final chapter summarizes complete project.
|
|
|
Wireless thermostat
Králíček, Martin ; Viščor, Ivo (referee) ; Kincl, Zdeněk (advisor)
The Master’s thesis discusses wireless thermostat for a control boiler. In order to complete the project we have to design and realise the whole project with software design. The system contains two units, a master control and a measurement of regulation units. The project initially talks about regulation of heating systems for family houses and larger buildings like schools and stores for example. Next, the project describes the control and regulation units and their potential extension for effective and economical operation. Both units are equipped with microcontrollers, which these control each of function. The communication between both units is provided by wireless interface in free radio band ISM. There is a user interface for the master control unit’s regulation process. The measurement and regulation unit has only the possibility to switch between manual and automatic control for regulation of heating system.
|
|
|
A new Variant of the Technology Components of the Valve Body
Kouřil, Vít ; Prokop, Jaroslav (referee) ; Kalivoda, Milan (advisor)
Bachelor thesis compares two technology variants of production on the inner part recess of the valve body type S43. This is a closing forged valve for power. The work analyses and displays structural design of the slide. After presenting existing technology of inner recess new technology is described in the thesis. The comparison was made with respect to machinery companies Armaturka Vranová Lhota, Inc. Assessment of better technology is described in the technical-economic evaluation at the end of thesis.
|
guest ::
