|
| |
|
|
Use of Modern Camera Systems for the Analysis of Road Accidents
Habart, Lukáš ; Prochazka, Eduard (referee) ; Panáček, Vladimír (advisor)
Diploma thesis deals with the possibilities of using video records in analysis road accidents. There are described static and dynamic camera systems. There are also explained the principles of functioning digital cameras and other related terms and associated principles. In this thesis there are compared several types of dynamic cameras, desribed analysis an evaluation procedure. Part of this thesis is to describe the legal issues of recording.
|
|
|
Recorder with SD card
Dohnal, Petr ; Fiedler, Petr (referee) ; Bradáč, Zdeněk (advisor)
This thesis presents the design and construction of Recorder with SD card. The paper deals with methods of communication between integrated circuit devices and the various functional blocks of equipment. Thesis also discusses the use of the FAT system for storing data on an SD card, file format .wav and convert analog signal to digital.
|
|
| |
|
|
Radio Telemetry for RC Aircrafts
Žák, Tomáš ; Fuchs,, Michal (referee) ; Povalač, Aleš (advisor)
Master‘s thesis is focused on problematic about state of RC plane model during the flight. Device is able to measure overload, height, position, pressure and velocity of the flight and store this measurement data to memory medium. The main aim of the master‘s thesis was to design a functional board, firmware for device and design simple program for evaluating of measured data. Involvement consists of five basic parts. First part is microcontroller, which processes measurement data and communicate with others parts. Next is accelerometer. Accelerometer is used for scanning overload of the plane. Barometer is used for measurement of height and pressure. For measuring position and velocity is used GPS module. Last part is memory medium. MicroSD is used as memory medium for storing measurement data. Evaluation of measured data is realized as simple program with base graphical user interface. Program was created in Matlab.
|
|
|
Datalogger with Ethernet
Orávik, Tomáš ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
Thesis deals with Datalogger with Ethernet interface controlled by DISCOVERY Kit STM32F429. Datalogger is equipped with eight digital inputs and three analogue inputs. The measured data are saved on the SD card. The Ethernet interface module is designed using LAN8720A from Microchip.
|
|
| |
|
|
River mionitoring system with GSM communication
Pačinek, David ; Šír, Michal (referee) ; Bradáč, Zdeněk (advisor)
This master thesis is dedicated to system of water monitoring for use of alternative source power supply and GSM communication. The thesis carried out research on the possibilities to take measurements on watercourses, also detailed research of photovoltaic panel, available accumulators and their charging and a synopsis of similar systems. Furthermore, the master thesis also captures design and implementation datalogger device type with possibility to send measured data to the website.
|
|
|
Ambulatory ECG Holter Monitor
Majerík, Peter ; Strašil, Ivo (referee) ; Číž, Radim (advisor)
The thesis deals with design of the device for monitoring four signals from the probes for scanning ECG, PPG and heart pressure. The thesis is mainly focused on hardware design of the device and the most important part is the selection of the storage media to which will be the data recorded and the selection of the microprocessor which has to be able to meet the requirements of the device. For the data recording is used SD card and the ARM based MCU was selected from the AT91SAM7S series. This thesis also deals with the software design for MCU which is needed to launch the device and with design of PC applications used for setting the device and for downloading the measured data. At the end there are presented results of the constructed device.
|
|
|
Drum Machine for Musicians
Spáčil, Tomáš ; Fedra, Zbyněk (referee) ; Povalač, Aleš (advisor)
The aim of this work is to create a functional prototype of a drum machine with sound generating using a microcontroller. Introduction is devoted to general drum machine and an analysis of its parts, principle and basic modes of operation. The following chapter deals with the principle of digital signal processing and sound generation using a microcontroller. Part of this chapter is focused on mixing using compression methods. The core of this work is to design my own block structure and overall scheme of the drum machine with a description of the parts. Followed by analysis and implementation with theoretical and practical point of view. It is mainly about presentation and description of important parts of firmware codes, DPS design and another technical documentation useful for final prototype production. The conclusion contains a summary of the results with prezentation and discussion.
|
guest ::
