|
|
Trade House in Brno
Serbousková, Kateřina ; Sýkora, Karel (referee) ; Barnat, Jan (advisor)
The final thesis deals with the design of the steel loadbearing structure of the shopping center situated in Brno. The built-up floor area is 1973 m2 (L-shaped ground plan with dimensions 48 m x 50 m). The construction consists of three parts. Building A has four above-ground floors and reaches a height of 25.5 m. The steel structure of mono-pitched roof is designed in two options. Both options consist of full-length purlins and truss girders. Building B is a single-storey building with a mono-pitched roof top reaching 8.1 m high. Building C is three-storey with a flat roof. The first floor has a construction height of 4.5 m and the remaining two floors reach height of 3.6 m, which coincide with building A. The steel structure is made of steel-concrete composite ceilings and pin-supported columns. In the case of bracings, pressure was eliminated by means of non-linearities.The work includes proposal, assessment of the supporting structure and calculation of the directional details. Internal forces were determined based on a static analysis in the SCIA Engineer calculation program.
|
|
| |
|
|
Shopping center in Frýdek-Místek
Pešák, Radek ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The aim of the diploma thesis is to construct a steel shopping mall hall. The construction is located in Frýdek-Místek. The whole object can be divided in two parts. One part of the building is an atrium with a cross bridge made from glass. The roof construction of the atrium is designed as system of cylindrical lattice girders within purlins are set up. The other part of the construction is multistoried shopping mall with terrace designed as composite steel and concrete structure. The whole ground plan size of the construction is 72 m x 120 m. The height of the construction above the ground is 12.06 m. The cross-links are built up to 6 m one. There were created two versions of the construction. The most convenient version is described in more details. The outcome of the thesis is a comparison of two above mentioned versions. The whole project is based on officially recognised standard ČSN EN. The construction was designed in RFEM programme.
|
|
|
Multi-storey building
Surovec, Daniel ; Bajer, Miroslav (referee) ; Štrba, Michal (advisor)
The object of this thesis is to design and assess steel structure of multi-storey office center in Vsetín. Floor plan dimensions of building are 48x40m. The building has ten floors. Overall height is 35,5m. The building ceilings made of composite steel and concrete structure. The part of build are roofer atrium and one bigger room aula with dimensions 24x16m. Two construction variants were designed and assessed. Longitudinal and transverse rigity of variant A is ensured by truss bracing. Transverse rigity of variant B is ensured by truss bracing and longitudinal rigity is braced by bracing frames. The variant A is better.
|
|
|
Production Hall with Administrative Building
Dolníčková, Andrea ; Balázs, Ivan (referee) ; Horáček, Martin (advisor)
The subject of this diploma thesis is design and check of two steel structures. A production hall with a floor plan dimensions 24x50 m and an administrative building with floor plan dimensions 54x30 m. Both buildings are situated in Prostějov. The structure of the production hall has a roof pitched at 12%. The main frames have 6 m centre to centre spacing. The design of the production hall is processed in two options. The administrative building has 4 floors. The floor structures are made of composite steel and concrete structure. The structure is stabilized by vertical bracings in both directions. The computational model of both structures was built up using SCIA Engineer software.
|
|
|
Administration building
Ondruš, Petr ; Šmak, Milan (referee) ; Štrba, Michal (advisor)
The subject of this diploma thesis is design and check the steel construction of the office building in Valašské Meziříčí. Floor plan dimensions of building are 55,0 x 30,0 m. The length of building gradually increases with each floor. The building has eight floors. Overall height is 33,6 m. The building ceilings made of composite steel and concrete structure. The construction in both directions is stabilized by vertical bracings. The building adjoins a smaller building with shops. Floor plan dimensions of that building are 31,5 x 21,0 m and building height to the top of the truss girder including cladding is 17,5 m.
|
|
|
The reconstruction of a storage object
Morcinková, Eliška ; Šmak, Milan (referee) ; Štrba, Michal (advisor)
The aim of this bachelor’s thesis is a reconstruction of the administrative building in Třinec. The work is divided into two parts: the design and assessment of a timber roof on the ground plan 16 × 21 m and steel supporting structure for the extension of the administrative building on the ground plan 8 × 16 m. The roof frame consists of 22 trusses with the axial distance 1 meter. The steel structure consists of two supporting frames connected to floor beams between them which create with the concrete plate composite steel and concrete structure.
|
|
|
Office Centre
Robotka, David ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
This diploma thesis deals with design of steel structure with composite steel-concrete floor structure of a office building.The building is located in Moravský Krumlov. The Office buidling consist of multi-storey building and an entrance atrium. The total ground plan's dimensions are 52,8m x 48,0m. The multi-storey building has 8 floor. The maximum heigh of the building is 25,32m above ground. The project is designed in two options. For winning variant is including check and it is performed a drawings with design and check assembly details and anchorage.
|
|
|
Business Centre
Hándlová, Barbora ; Balázs, Ivan (referee) ; Pilgr, Milan (advisor)
The diploma thesis deals with design of steel structure of shopping centre, which is located in Zlín. The total ground plan‘s dimensions of the structure are 153 x 49 m. The maximum height of the building is 23,1 m. The structure of the shopping centre is formed by columns, primary and secondary beams. Floor structure is designed as composite steel and concrete structure. The roof structure, above the central part of the buildig is designed in two alternative versions. There is prepared statics calculation of the main load-bearing parts of the structure, including joints and details.
|
|
|
Rally team base
Mikeš, Daniel ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The object of the diploma thesis is the design and the assessment of the steel structure for rally team base in Napajedla, which contains the space for the administration and the space for the service hall. The overall ground plan proportions of the structure are 30 x 26 metres. The structure for administration is the four-storey building. The ground plan proportions of this structure are 30 x 12 metres and the height is 14.5 metres. The ground floor grid of the main load-bearing structure is 6 x 6 metres. The height of the one floor of the structure is 3.5 metres. The structure of ceilings and roof is designed like composite steel and concrete structure. All joints of the steel structure for administration are designed like bolted joints. The spatial rigidity of the structure is ensured by vertical wall truss bracings and by the rigidity of composite steel and concrete structure of ceillings and roof. To the structure for the administration is connected structure for the service hall. The ground plan proportions of this structure are 30 x 14 metres and the height is 10.5 metres. The main structure of the structure for service hall is frame with the rigid joint in the corner of the frame. The axial distance of the main structures is 6 metres. All joints including the rigid joint in the corner of the frame of the steel structure for service hall are designed like bolted joints. The spatial rigidity of the structure is ensured by vertical wall truss bracings and horizontal roof truss bracings. The whole structure is designed of steel S355.
|
guest ::
