|
|
Bridge over a roundel
Gross, Tomáš ; Klusáček, Ladislav (referee) ; Panáček, Josef (advisor)
The bachelor thesis deals with design construction of two new bridges over the roundabout. Roundabout is part of exit 354 of the D1 motorway. Bridges is located at kilometer 278.786 on road I /11. Three studies were developed. Design of the first study is post-tensioned prefabricated I beams, which are composite reinforced concrete slab. Design of a second study is post-tensioned slab-beam. Design of a third study is post-tensioned doublebeam. For a more detailed assessment of the study was chosen No. 1 - post-tensioned prefabricated I beams, which are composite reinforced concrete slab. Calculating the effects of the load is solved in Scia Engineer. Construction phase was carried out using TDA - temporal analysis. Testimonials are partially controlled by manual calculation.
|
|
|
Bridge formed by cell box girder
Zifčák, Karel ; Brtáň, Stanislav (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design and assessment of the bridge construction across the deep valley on highway traffic. From three variants, which were compared to each other, was the most suitable further examined. The solved structure is made of post-tensioned concrete, and is formed with cell box girder with transverse overhangs, which are supported by prefabricated struts over the length of the bridge. The load was considered by the European Standard EN 1991-2 - Traffic loads on bridges and dimensioning according to EN 1992-2-Design of concrete structures - Concrete bridges - Design and detailing rules.
|
|
| |
|
|
Prestressed bridge No. 202 on the expressway R2 in Slovakia
Janek, Tomáš ; Urban, Jiří (referee) ; Koláček, Jan (advisor)
My diploma thesis deals with design of the bridge number 202 on expressway in Slovakia. The bridge leads across the road number I50 (between Trenčín and Bánovce nad Bebravou) and railway number 130 (between Trenčín and Chynorany). For each course there is a separate super-structure. Only left super-structure is considered for the work. The box girder with four spans is chosen from three variations. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural model of construction is made as a spatial bar model. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.
|
|
|
Design of bridge on highway D1
Kopřiva, Jan ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The purpose of this thesis is to design bridge over the valley on D1 highway. Length of the structure is 170 meters. Main structure is four spans prestressed beam. The length of fields is 36+48+48+36 meters. The structure is examined in all phases of construction, including the operating phase according to valid standards.
|
|
|
Load-bearing reinforced concrete construction
Klajba, Daniel ; Hasala, Ivo (referee) ; Šulák, Pavel (advisor)
The aim of diploma thesis is to design monolithic reinforced concrete underground structure, which is partly under existing building and partly will form the basis of a new outbuilding. Structure is designed as white tub, whitout any additional isolations against water a ground humidity. All structure elements (slabs, walls, beams) was designed according to standard ČSN EN 1992-1-1 for ultimate and serviceability limit state. Structural analysis was performed using Scia Engineer 2013 – Student version. The results were validated by simplyfied manual method.
|
|
|
Dynamic analysis of bridge construction
Kinclová, Radka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
The objective of this diploma thesis is a dynamic analysis of a cable-stayed walkway. The RFEM structural analysis software is used for the calculation. Design principles of the structure are explained and analysis of the construction phases is then performed. The eigenmodes of the structure are calculated for various material combinations. The thesis examines the effects of moving loads and earthquake effects using several different methods. A comparison of the various loading effects on the structure and also the calculation methods is presented at the conclusion.
|
|
|
Bridge over the Živný Brook
Sekanina, Josef ; Řehulka, Martin (referee) ; Panáček, Josef (advisor)
This thesis occupies with the design of the road bridge over the stream Živný, a railway lane and a projected road between Běleč village and Husinec village. There are designed three variants of bridges. The variant no. 1 – continuous box girded beam – was chosen for the detailed analysis. The pre-stressed concrete road bridge is designed and evaluated according to European standards – Euro codes. The sequential construction influence and its impact on the construction is also considered in the calculations. The drawing documentation and the visualization of the bridge are made.
|
|
|
Bridge across the Morávka river at km 6.205
Hollý, Tomáš ; Marván, David (referee) ; Nečesal, Petr (advisor)
The subject of the thesis is to design and consider steel superstructure of a composite steel-concrete road bridge. It is a continuous beam with seven spans of 36,0 + 57,0 + 75,0 + 90,0 + 75,0 + 57,0 + 36,0 = 426 meters. The superstructure consists of welded I-beams, which pass into closed box girder. The calculations take into account the construction phase.
|
|
|
Design of Building on the Wenceslas Square
Moc, Ondřej ; Hladík, Pavel (referee) ; Zich, Miloš (advisor)
The Diploma’s thesis deals with the design of selected parts of reinforced and prestressed concrete structure. Internal forces were solved by software SCIA ENGINEER. Prestress concrete element was solved by module TDA. Phases of construction were considered. Detailed solution is focused on the design of reinforced concrete floor slab with joists within the basement, reinforced concrete beam with five spans within the basement, reinforced girder within the basement, reinforced column within the basement, reinforced footing and prestressed concrete joist within the basement. Drawings of shape and drawings of reinforcement are included in this thesis. Other elements of construction were not solved in this thesis.
|
guest ::
