|
|
Preparation of hydrosorbents from humic acids
Nováčková, Táňa ; Giláni, Vladimír (referee) ; Sedláček, Petr (advisor)
This diploma thesis is focused on development and characterization of synthetic hydrogel materials containing humic acids. Based on the literature review, procedure for the preparation of synthetic superabsorbent containing humic acids was designed and optimized in order to maintain required functionality of the resulting materials, such as swelling abilities and to the controlled the release of humic substances. Very important part of this work was also characterization of superabsorbents by wide range of routine physic-chemical methods (rheometry, moisture analyzers, FT-IR). Preparation of these materials is aimed to their use in agriculture and in the environment.
|
|
|
Study of physical gels with hydrophobic domains
Kovářová, Lenka ; Márová, Ivana (referee) ; Mravec, Filip (advisor)
The thesis is focused on physical hyaluronan gels. The object of study is the interaction of hyaluronan (HyA) with oppositely charged surfactants in physiologic solution (0.15 M NaCl), leading to the formation of gel. In the first part of work have been determined the solids´ contents (X) in gels and their supernatants in percentage and their correlation with molecular weight concentration of original HyA solution and the ratio of binding sites on hyaluronan chain and surfactant CTAB. To conclude, decrease in HyA concentration results in higher values of X and vice versa. On the other hand, increase in the value of X with increasing molecular weight of HyA is not so significant. Analogous conclusions have been made for supernatants and the amount of solids in gel. Drying process has been recorded by drying curves. Swelling process has been used for the characterization of gels. The percentage of water that can be absorbed by dried gel, was determined. The results are in agreement with the measurements of solids´ content in gels. In the next part, the correlation between rheological properties of gels and HyA concentration, HyA molecular weight and concentration of CTAB have been studied by the oscillation and flow tests. The samples with the highest molecular weight and concentration have the most viscoelastic character. The flow test confirmed the assumed pseudoplastic behavior of gels. A very interesting trend arose while comparing HyA concentrations and viscosity in stock solutions and gels. Whereas in stock solution viscosity (at low shear rate) is lower with increasing of HyA concentration, the situation was exactly the opposite in gels. The results are in agreement with frequency tests and observed character of gels.
|
|
|
Biodegradable polyurethanes based on poly(ethylene glycol)
Kupka, Vojtěch ; Žídek, Jan (referee) ; Vojtová, Lucy (advisor)
Predložená diplomová práce se zabývá syntézou biodegradabilních polyuretanu (bio-PU) na bázi polyethylenglykolu (PEG-u) a polykaprolaktonu (PCL) pro využití k medicínským úcelum. Cílem práce bylo vyvinout metodiku prípravy elastomerního polyuretanu, ze kterého by se dal v budoucnu pripravit skafold (nosic bunek) použitelný v tkánovém inženýrství pro humánní regenerativní medicínu. Teoretická cást práce shrnuje informace o materiálech využitelných pro zamýšlenou aplikaci. Zahrnuty jsou také techniky prípravy skafoldu, jejich biokompatibilita a charakterizace vlastností výsledného materiálu. Praktická cást je pak zamerena na navržení vhodné metodiky pro prípravu funkcních vzorku obsahujících PEG, PCL, hexamethylen-diisokyanát (HMDI) a ethylhexanoát cínatý jako katalyzátor. U pripravených vzorku byl zjištován vliv jejich složení (predevším ruzný obsah a molekulová hmotnost PEG-u) na botnání a hydrolytickou stabilitu spolecne s testováním mechanických vlastností, sledováním kinetiky sítování a stanovením stupne konverze. Morfologie vzorku byla sledována pomocí optické mikroskopie, chemické složení bylo potvrzeno infracervenou spektroskopií a tepelné vlastnosti byly urceny diferencní kompenzacní kalorimetrií. Vývoj v metodice prípravy ukázal, že je nezbytné odstranit pred syntézou z výchozích látek veškeré necistoty, predevším vodu a kyslík, jinak vznikaly nedokonale zreagované vzorky s velkým obsahem póru ruzných velikostí. Syntéza všech vzorku probíhala pod dusíkovou atmosférou ve dvou krocích, kdy v prvním se pouze homogenizovaly oba polyoly (PEG i PCL) na vakuové lince pri 130 °C a ve druhém pak vznikaly výsledné bio-PU za pridání HMDI pri 65 °C v inertní atmosfére manipulacního boxu. Vzorky pak byly dopolymerovány ve forme pri 65 °C pod dobu 48 hodin v sušárne. Ruzné fyzikální podmínky metodiky vedly k príprave jak nepruhledných bílých filmu, tak i vzorku s viditelnou separací fází až po flexibilní transparentní filmy. Pozorování optickým mikroskopem vzorku s fázovou separací prokázalo prítomnost sférolitické struktury krystalické fáze PCL v amorfní fázi matrice PEG-u. Sledování kinetiky sítování pomocí soxhletovy extrakce potvrdilo maximální konverzi polymerace (96 %) již za 4 h dopolymerování v sušárne. Testování zkouškou v tahu ukázalo, že výrazný vliv na pevnost v tahu má isokyanátový index (pomer NCO/OH skupin). Molekulová hmotnost PEG-u ovlivnovala pevnost v tahu jen u vzorku zcela zesítovaných. Merení botnání vzorku ve vode prokázalo, že s rustem molekulové hmotnosti PEG-u roste i obsah vody (od cca 28 až po 58 hm.%) ve vzorcích. Také degradace filmu ve vode pri 37 °C probíhala dle predpokladu rychleji u vzorku s vyšší molekulovou hmotností PEG-u. V predložené diplomové práci bylo potvrzeno, že množstvím a molekulovou hmotností polyethylenglykolu je možné rídit hydrolytickou stabilitu výsledných biodegradabilních polyuretanových elastomeru.
|
|
|
Preparation and characterization of novel application forms of humic substances in combination with water sorbents
Nováčková, Táňa ; Pekař, Miloslav (referee) ; Sedláček, Petr (advisor)
This bachelor’s thesis discusses an applicability of hydrogel forms-based composite materials of humic acids and commercial water sorbent. According to the literature review, methods of incorporation of humic acids into commercial sorbents of water under various conditions and the resulting materials were subsequently characterized. In the characterization, major attention was paid to the determination of the water content and the swelling characteristics. Preparation of the composite materials was directed to use their sorption abilities and ability to control the release of humic substances in agriculture.
|
|
|
Preparation and application of physical hyaluronan gel
Kovářová, Lenka ; Krouská, Jitka (referee) ; Venerová, Tereza (advisor)
Bachelor's work is concerning by research in physical hyaluronan gel area. Research is focusing on its preparation, especially by interaction of hyaluronan (HyA) solution with opposite charged surfactant in physiological solution (0,15 M NaCl). In the first part of work I found out influence of molecular weight, concentration of original hyaluronan solution and the ratio of binding sites on hyaluronan chain and surfactant on amount of solids in gel, expressed in percent. Finally we can say, that this value is not influenced by molecular weight of HyA neither relation of binding sides. On the other side, concentration of original HyA solution has significant influence on amount of solids in gel. There was also researched process of gel swelling, where was set amount of water (in percent) able to take dried gel back. Analogical conclusion has been reached like amount of solids in gel. In other part were researched influence of hyaluronan molecular weight and the ratio of binding sites on hyaluronan chain and surfactant on formation of excimers and spectrum change by fluorescence spectroscopy. Pyrene, 1,3-bis(pyren-1-yl)propane (P3P) and prodan were used as fluorescence probes. Excimer emission showed at P3P, while there was no growth of intensity at 470 nm for pyrene. It was found that molecular weight does not affect the value of the ratio of excimer and monomer probe P3P, or the ratio of the first and third peaks of pyrene. The ratio of binding sites HyA and surfactant influence only relation of excimer to monomer (P3P probe), while influence to relation 1:3 hasn't been noticed for pyrene. I have compared spectrum of developed gel for prodan probe, relevant solid and swelled gel by return. It also served for drying and swelling process visualisation.
|
|
| |
|
|
The frost susceptibility of soils and materials for subgrade of pavements
Puda, Adam ; Pácha, Petr (referee) ; Stehlík, Dušan (advisor)
The bachelor thesis deals with the theoretical part of the deformation caused by frost action, but primarily frost heave, their gradual development and factors affecting their final formation. Furthermore, different ways of measuring the frost susceptibility in the Czech Republic and their comparison. Introduction to the different methods of measuring frost susceptibility in selected countries within the European Union. The practical part is focused on the process of frost heave samples with and without thermal insulation material.
|
|
|
Solidifikace ionesu s přídavkem dastitu v geopolymerné matrici
Černoušek, T. ; Hendrych, J. ; Sobek, Jiří
Solidification of ion exchange resins is specific in comparison to other liquid and solid RAW for all that use geopolymers, cements or other inorganic matrix. In contact with water the unsaturated ion exchange resin the swelling occures and internal pressure arises, and can reach up to 50 MPa. These changes can disrupt the process of solidification, cause cracks, which finally deteriorate the solidificate leaching parameters and lead to a decrease weight ratio of ion exchange resin to binder. To increase the loading capacity of ion exchange resin into the geopolymer the additive representing highly absorbent material Dastit has been tested, in terms of mechanical properties.
Fulltext: content.csg -  PDF
Plný tet: 025 - PDF
|
|
| |
|
|
Influence of Organic Electrolytes Presence on Swelling of Nafion Membrane in Methanol-Water Mixtures
Randová, A. ; Hovorka, Š. ; Izák, Pavel ; Bartovská, L.
The anisotropic swelling of Nafion 112 foil in methanol - water - inorganic salt was examined. Our results show that even small addition of inorganic salt into methanol - water mixture affects kinetics as well as the swelling equilibrium. The effect of inorganic salts LiCl, NaCl, KCl, CsCl, CaCl2, CdCl2, K2CO3, KNO3, NH4Cl, and AgNO3 was studied. Swelling kinetics of Nafion in ternary mixtures including salt show maximum suggesting that effect of methanol-water is faster but effect of inorganic salt is stronger. Theexperimental data, presented in this work allow us to assume that swelling of Nafion decreases with increasing ionic radius of cation.
|
guest ::
