|
|
Passive optical networks WDM-PON
Havliš, Ondřej ; Šifta, Radim (referee) ; Münster, Petr (advisor)
The work deals with optical access networks, passive optical networks, especially WDM-PON. Features a modern solution to connect users to the optical access network using optical FTTx connections. Describes the different types of FTTx connections, their parameters and construction technology. Practical work is a practical application of theory for the development of various design and simulation of WDM-PON networks. Each proposal includes the construction of technical solutions optical access networks, the technology used and the balance of the reduced pricing WDM-PON network. The penultimate part of the work consists of design models simulated WDM-PON networks by the simulation program OptSim. The conclusion deals with the evaluation of individual design and simulation of WDM-PON networks.
|
|
|
Model nonlinear effect in ultrasound fields
Kulík, Tomáš ; Čech, Petr (referee) ; Rozman, Jiří (advisor)
The main topic of this diploma thesis is the modeling of nonlinear effects in ultrasonic fields. The work deals with application of finite difference method (FDTD) on the Westervelt equation and the subsequent creation of the model of ultrasonic fields in MATLAB. This thesis also includes theoretical analysis of ultra-acoustic and technical aspects of diagnostic ultrasonography. In addition, this document includes verification of theoretical assumptions by using created model.
|
|
|
Boundary Nodes Detection in Wireless Sensor Networks
Bocek, Jan ; Vajsar, Pavel (referee) ; Šimek, Milan (advisor)
Theoretical part of thesis describes several known algorithms and new approaches for the bourder node detection in a wireless sensor networks. The new algorithm BRB was inspired by failures of previous algorithms and its major supporting idea is select several neighboring points (B, C). Approach algorithm BRB is a decentralized detection of nodes located at the perimeter. The practical part compares several algorithm with the new BRB algorithm. Quantity of successful and false detection of boundary nodes was evaluated in ideal and real environment.The simulation results shown, that the proposed algorithm is effective solution for accurate border node detection in wireless sensor networks.
|
|
|
Design and realisation of microwave directional coupler
Nejedlý, Miroslav ; Motl, Milan (referee) ; Dvořák, Radek (advisor)
The diploma thesis deals with microwave directional coupler. The paper presents some of the microwave directional coupler and an analysis of bifurcations. The paper also discussed the various techniques of bifurcations and the bandwidth to which they are making. Proposal is implemented in two selected directional couplers and determining their size. They also performed using the selected simulation program selected two bifurcations. Furthermore, these couplers are made on the perimeter of the analyzer is verified by their actions and are verified by the actual parameters of the coupler.
|
|
|
Simulation of dielectric materials absorption characteristics
Bačkovský, Pavel ; Novák, Vítězslav (referee) ; Křivík, Petr (advisor)
This projects deal with dielectric materials. Characterize definition of dielectric and polarization of dielectric. Shows dielectric relaxation. Specified conception dielectric absorption and interpreted them with DC voltage charging condensator. However, this thesis be engaged in simulation of this process. Output is simulation program of dielectric absorption characteristics for two relaxation mechanism.
|
|
|
Internet nodes localization using synthetic coordinate systems
Švéda, Jaroslav ; Jelínek, Mojmír (referee) ; Komosný, Dan (advisor)
This thesis deals with predicting the latency between two network nodes, such as the two stations, two servers or server and station. The main reason for adoption of effective latency prediction techniques is the elimination of network load caused by unnecessary repeated transmissios or by direct measurement of the latency. Of the many proposed methods of latency estimation, this thesis is focused on methods using artificial coordinate systems with primary focus on the Vivaldi algorithm. Characteristics of the latency prediction methods and properties of various coordinate systems used in practice are evaluated. The issue of the number of dimensions of space defined only by the latency matrix between nodes is also mentioned. Furthermore, some other systems, based on logical clustering of nearby nodes, are mentioned. Description of simulation software VivaldiMonitor developed as part of the thesis is included. The primary purpose is analysis of the behavior of overlay networks implementing Vivaldi algorithm with less than a few hundred nodes. The Vivaldi algorithm is assessed by several simulations carried out using the aforementioned software.
|
|
|
Program for calculation of BLDC motor
Chloupek, Karel ; Janda, Marcel (referee) ; Vítek, Ondřej (advisor)
This thesis focuses on problematics of BLDC motors. Thesis consist of theoretical and practical part. In introduction is the reader acquaint with problematics, principals of development, advantages and disadvantades of BLDC motors. Then folows a description of different types, their realization and construction. Main part of this thesis deals with segment stator. For this type of magnetic circuit was developed computing software. This software will design and provide calculation of motor due to given parameters. In second step, the program generates source code for FEMM software, which provides a simulation. This is the most effective way, how can designer simply verify his calculations
|
|
|
Design and making of low-frequency power amplifier in class AB
Dušek, Martin ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
In this bachelor thesis I am occupied with low frequency amplifiers, theirs important parameters, classes and with integrations end-level. Next I am occupied with miscellaneous types of preamplifiers and additional circuits. There are simulated schemes of corrective preamplifier, protections scheme and high power amplifier in PSpice software in this thesis. These schemes and next additional modules are connected with DPS. This thesis contains result of measurement and photo functional sample.
|
|
|
SNOM probes with special properties
Slabý, Vít ; Kalousek, Radek (referee) ; Spousta, Jiří (advisor)
This bachelor thesis deals with scanning near-field optical microscopy. With SNOM we examined experimentally the near field of the interference of surface plasmon polaritons (PPP) on plasmonic structures consisting of slits in a metal layer a we discuss the effect of probe characteristics on the measurement results.Effect of few characteristics is simulated numerically. Findings obtained in the previous experiments are used for the construction designing of an experimental device called NanoGIS, which should serve for the nanostructure manufacturing.
|
|
|
Analyses of Mechanical Tasks in SolidWorks Motion
Cikánek, Pavel ; Březina, Lukáš (referee) ; Hadaš, Zdeněk (advisor)
The main goal of this thesis is to create and to simulation the samples from area of the kinetics and the dynamics in CAD system in order to be used as the teaching models. The examples will be created as simply and easily rebuilt 3D models in CAD program SolidWorks and they will be analysed in the Motion modul. The main task is to compare the results from SolidWorks Motion program with the current solution, eventually with the other CAD system. At the end the advantages and the disadvantages of SolidWorks Motion program will be evaluated.
|
guest ::
