|
|
Matrix display
Gábik, Matej ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
The aim of this thesis is to implement autonomous information portal using matrix display BUSE BS210. The first part deals with the theoretical problem-solving and management options display. The second part is dedicated to the development of necessary hardware and the last part is the software described herein microcontroller and microcomputer Raspberry Pi.
|
|
|
Aerospace Industry Bus ARINC429 Low Cost Communication Interface
Michna, Jakub ; Mišík, Štefan (referee) ; Bradáč, Zdeněk (advisor)
The aim of this work was to create a communication interface of standard ARINC Aerospace Industry Bus 429. The work has slightly outlined existing solutions, from which it can draw inspiration. Further analysis was performed, analysis of ARINC 429 bus, analysis of Raspberry Pi platform on which the solution will be built, and analysis of selected bus controller HI-3593. After that concept was created, based on concept was created the scheme contains circuitry HI-3593. On the basis of the scheme was created DPS. Next was created software for DPS. In the end of this work was tested abilities to receive and send messages on the bus ARINC 429.
|
|
| |
|
|
Laser Projector
Svoboda, Pavel ; Burian, František (referee) ; Žalud, Luděk (advisor)
The aim of this thesis is to create a system, which draws the graphics with the help of a set laser project and eventually is able to synthetize several coloured rays and thus realise a multicolour drawing. The whole system is controlled by a Raspberry PI microcomputer and the data is sent to it from a PC via an Ethernet cable. The transmission of the projector device was identified and possible ways of improving the device were suggested. The results of this thesis allow creation of a multi-coloured vector picture, transferring it into the device and depiction on the project desktop. The whole device can therefore be used for example for the purpose of a presentation.
|
|
|
Device for personal identification and data sharing
Severa, Pavel ; Klusoň, Vladimír (referee) ; Friedl, Martin (advisor)
Result of my work is make device for logging visitors or game players. I arranged to make two devices, web pages and communication protocol between server and devices. Graphical device will have graphical display with HDMI input, Raspberry main board, NFC reader, camera and GSM module. Second device will have microcontroler ATMEGA644, NFC reader, 2-4 line text display and optional GSM module. Both device will communicate with server via GPRS. Server can change configuration of devices and colecting logs
|
|
|
Video doorphone
Horyna, Miroslav ; Macháň, Ladislav (referee) ; Šteffan, Pavel (advisor)
This thesis deals with door video phone on the platform Raspberry Pi. There is described the platform Raspberry Pi, Raspberry Pi Camera module, operating systems for Raspberry Pi and described installing and configuring the software. Next is described the concept and description of programs created for door video phone and design of additional modules.
|
|
|
Stability and autopilot system for airplane RC model
Čamaj, Peter ; Republic), (SAAB Technologies Czech (referee) ; Šebesta, Jiří (advisor)
The master thesis deals with design and realization of stabilizing and autopilot system, which is used in radio controlled model planes. The thesis contains a proposal of hardware platform, which is able to control the plane model based on data measured from a sensor system. Moreover, this thesis describes a software implementation of individual modules, which is measured the onboard values. The basic principles of stabilization and autonomous flight control are also summarized. In conclusion, the system is subjected to flight tests.
|
|
|
Control the model car
Martykán, Lukáš ; Pavlík, Michal (referee) ; Šteffan, Pavel (advisor)
This master‘s thesis deals with applications for tablets running Android to control the car. As a control unit is used Raspberry Pi with Edimax WiFi module. The practical part focuses on the realization of applications for tablet and board layout for switching lights.
|
|
|
Control system of mouth-organ
Trukhina, Irina ; Franek, Lešek (referee) ; Bradáč, Zdeněk (advisor)
The master’s thesis describes development of control system for automatic mouth-organ. The process of development is divided into three parts: a concept of control system, design of hardware parts and development of software parts. Controlled device, system requirements and general design of the hardware and software components are described in the concept of control system. The detailed hardware design includes next processes: electronic component selection, printed circuit board design, assembly and debugging. The result of this chapter is electronic system, which function correctly. The aim of the last chapter is to specify and explain development of software parts of control system. Installation of required software and important aspects of control software and user interface development are described in this chapter. The goal of the thesis is to create a control system, which will function correctly and reliably.
|
|
|
Info-portal with WWW
Pilný, Jiří ; Franek, Lešek (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with conception of info-portal controlled by Ethernet connection. The system is divided into three parts: web server, control electronics and flip-dot panel. The information to display is sent to or received from the web server. The info-portal is equiped by sensors for measurement of interior parameters (temperature, humidity and atmosferic pressure).
|
guest ::
