National Repository of Grey Literature 75 records found  beginprevious56 - 65next  jump to record: Search took 0.01 seconds. 
Design of Common Rail Pump Shaft Radial Force Device
Chromý, Martin ; Pešl, Radim (referee) ; Ramík, Pavel (advisor)
The aim of this thesis is a preliminary draft of test equipment for testing fuel injectors Common Rail system with the drive shaft radial loading. The work presents a brief overview of the contemporary designs of the pump system, which then leads on equipment design.
Common Rail for Four-cylinder CI Engine
Brhel, Štěpán ; Svída, David (referee) ; Dundálek, Radim (advisor)
This master´s thesis deals with instalation of high pressure injection system Common Rail on four-cylinder tractor CI engine. Thesis introduces in the first part the injection systems of CI and tractor engines and related issues. In the next part is solved the conversion of engine, design of most important components - injetor, high pressure pump, pressure accumulator and high-pressure pipes and then stress analysis of new components.
Application of Pressure Accumulator Injection System on Six-cylinder CI Engine
Pacovský, Tomáš ; Štěpánek, Karel (referee) ; Dundálek, Radim (advisor)
This master's thesis deals with application of modern injection system Common Rail on six-cylinder CI engine. One of aims of thesis is to get a large overview of pressure accumulator injection system and explore the development in this area. Among main aims of the thesis belong a new construction layout in Pro/Engineer, accomplishing of static and dynamic analyse of most important parts via the finite element method (FME) and necessary control calculations. Finally, the design documentation of new most essential designed parts will be made. During making the thesis necessary source materials obtained from Vývojový ústav traktorů a.s. of Zetor Group company was made use of.
Common Rail System for 6-cylinder Tractor Engine
Černoch, Josef ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This thesis deals with the installation of modern high pressure injection common rail system to six-cylinder tractor engine. This system replaces injection system with in-line fuel injection pump. Common Rail system installation on an existing engine is designed with minimal design changes to the engine block and engine head. It is advantageous to minimize production costs of the transition to high-pressure injection system. The thesis contains the design and stress analysis of the new component for high-pressure injection system.
Common-rail System for 4-cylinder CI-engine
Ošmera, Petr ; Svída, David (referee) ; Dundálek, Radim (advisor)
This diploma thesis with a view to „common rail system for 4-cylinder CI-engine“ deals with the application of modern injection system „common rail“ to already existing compression-ignition tractor engine. The diploma thesis treats of the most necessary adjustments related with the replacement of injection systems which was solved in the way of the minimum adjustments. This kind of solution deals with an economic aspect of the problem. The reconstruction contains the engineering design of development of high pressure components and the suitability of their placing on engine.The primary adjustment of the application of system „common rail“ for existing tractor engine confirmed the possibility of this reconstruction.
Engine Motormanagement Software
Kuda, Roman ; Kuchyňková, Hana (referee) ; Hájek, Vítězslav (advisor)
Increasing requirements and claims on running of motor vehicles contributed to development of new systems on the mixture preparations of fuel and ignition. Cardinal causes, which led to the very intensive research and later introduction of superior systems of injection and ignition, where fulfilment of stricter emission limits, lower fuel consumption at prezent engine-power increase and engine torque. The conception of the classical gas-engine was not changed over the past few years. The supervising elements as ignition and injestions of engines are continuously changed.
Engine Motormanagement Software
Kopecký, Ivo ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
Fuel injection is a means of metering fuel into an internal combustion engine. In modern automotive applications, fuel metering is one of several functions performed by an "engine management system". A fuel injection system is designed and calibrated specifically for the type(s) of fuel it will handle: gasoline (petrol), Autogas LPG (also known as propane), ethanol, methanol, methane (natural gas), hydrogen or diesel. The majority of fuel injection systems are for gasoline or diesel applications. With the advent of electronic fuel injection, the diesel and gasoline hardware has become quite similar. During the last twenty years a preparation of a fuel mixture and the way of ignition in engine segment have changed the most. Instead of a carburettor it is being used the unit, which prepare fuel mixture according to a status of a car on the road e.g. change of pressure, temperature or ratio of a fuel and air.
Injection Systems of Commercial Vehicles
Horníček, Petr ; Prokop, Aleš (referee) ; Dundálek, Radim (advisor)
In this thesis I describe the fuel system components and their function. Furthermore, there is an overview of the most commonly used injection systems with the principle of operation, advantages and disadvantages of the embodiment. There is also processed the issue of the emission standards. This thesis contains a list of the world's leading manufacturers of commercial vehicles and their injection systems. Finally there is a reflection on the future development of injection systems.
Fuel Systems with Pressure Accumulator
Buchta, Martin ; Janoušek, Michal (referee) ; Dundálek, Radim (advisor)
This bachelor's thesis is focused on the Common Rail injection system for diesel engines. There is described each component, function principle and history of the system. It deals with currently used systems, theirs application in passenger cars engines and theirs effect on emissions in exhaust gases. It is concluded that the Common Rail injection system is currently the best, which we can use in passenger's cars diesel engines.
Injection Systems of Commercial Vehicles
Cajzl, Štěpán ; Janoušek, Michal (referee) ; Dundálek, Radim (advisor)
This thesis summarizes information about injection systems used in commercial vehicles. Includes an overview of different types of injection systems, their differences in structure, function description and their pros and cons. The following is a list of the world's leading automobile manufacturers of commercial vehicles, indicating the injection system on the engines. Finally, a comparison of different systems.

National Repository of Grey Literature : 75 records found   beginprevious56 - 65next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.