|
|
Thermometer for SW/HW Platform FITkit
Čižinský, Vojtěch ; Šimek, Václav (referee) ; Vašíček, Zdeněk (advisor)
The real progress in temperature measurement was made in 20th century. This specialization has since affected all domains of human doing and improved many of processes. This bachelor thesis deals with the design of a measuring module, which has to be plugged to a FITkit platform, and the implementation of the program, which communicates with the module. There will be a couple of various temperature sensors placed on the module, with various ways of the temperature presentation.
|
|
|
Printed Circuit Board Modal Analysis Results Comparison from Experimental and Computational Modeling
Oplt, Tomáš ; Vosynek, Petr (referee) ; Tošovský, Jiří (advisor)
Modal analysis of printed circuit board results, gained from computional and experimental modeling, have been compared. Anylyses have been performed on dummy boards (models without electronic components), created as one-layered at first, then as three-layered PCB. Board is usually clamped by its longer edges with wedgelock. In order to enable the realization of boundary conditions in computional and experimental modeling, real clamping has been simplified to simply supported. Computional models have used FEM elements, which are comomnly used in this type of problem. Determined results have been evaluated by comparing the experimental modeling results. Models‘ sensitivity on modification of element length and number of elements through thickness have been performed.
|
|
|
Smart home base station
Vašek, Jiří ; Štohl, Radek (referee) ; Fiedler, Petr (advisor)
This Bachelor thesis is focused on the design of embedded system built on the RCM3000 RabbitCore module developed by Rabbit. Periphery for communication with external devices such as detectors and sensors will be designed for this module. In the end, the design process of a motherboard with all essential procedures is proposed.
|
|
|
Semiautomatic Dispenser Application in Flexible Low Series PCB Assembly in SMT
Prikryl, Petr ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
The aim of this thesis is solving the issue of introducing the Dotmaster semi-automatic dispenser into the flexible low series surface mount technology assembly of printed circuit boards. The first part of the thesis deals with the issue of introduction to the dispension of solderpastes, adhesives and packaging materials. The second part is focused on the description of the Dotmaster semi-autamatic. The last part is devoted to actual measuring and observation with the device using PD 860002 SA adhesive made by Heraeus company and SAC solder paste by Kester company. Showing the characteristics of dependecies of the shape of the dispensed adhesive and solder paste on several parameters of dispension follows.
|
|
|
Basic measurement of bipolar and unipolar transistor
Kaňa, Leoš ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
In terms of the better effectiveness in the sphere of transistor characteristics measuring, no matter unipolar (FET) or bipolar (BJT), in laboratory conditions and their better understanding in terms of thrash out a subject matter is desirable have to available workplace let us say preparation enabling this kind of measuring with modifiability wiring and with possibility to change measured component. This thesis isn‘t focused only on development of this kind of universal component for measuring but simultaneously contains brief summary about the theory and parameters of transistors. Next aim is the development and realisation of static characteristic measuring program in VEE 8.0 Pro environment. Finally the complex laboratory exercise has to be done for measuring of bipolar and unipolar transistor’s static characteristics include programs for automatic measuring. For developing of DPS was used developing system named Eagle which gives us instrument with sufficiently accuracy. In thesis is contained theory needed for measuring and programming. Except possibility of measured component change we can change transistor connection in circuit on the board. This change is available for BJT (CE, CB, CC) and unipolar JFET (CS, CG, CD) transistor’s.
|
|
| |
|
|
Control of graphic OLED display with Atmel microcontroller
Bartošík, Vladislav ; Lattenberg, Ivo (referee) ; Hanák, Pavel (advisor)
This Master's thesis deals with design and a realisation of a device controlling an OLED display, Densitron DD-25664-1A. This display has a resolution of 256 x 64 pixels and allows displaying of 4-bit grayscale. The proposed utility software implements the initialization and termination functions, two sets of fonts { Latin and Greek letters and functions for rendering graphics and text. The result of the project is a device with the controlling software.
|
|
|
Use 8x8 LED Matrix and MEMS Sensor for Promotional Purposes
Středa, Jakub ; Matyáš, Pavel (referee) ; Zuth, Daniel (advisor)
The main objective of this bachelor thesis is to create exemplary application for promotional purposes. It means using of a microcontroller ATmega32A, a MEMS acceleration and angular velocity sensor and a LED matrix with a driver.. In the theoretical part the thesis is focused on the characteristics of used components, their features and way of control. Subsequently, the thesis deals with a power supply, design and manufacture of a printed circuit board for microcontroller and the last part of the thesis is focused on a microcontroller's software and manufacture of a casing.
|
|
| |
|
|
Creation of center for the manufacture of printed circuit boards
VÍTEK, Václav
This bachelor´s thesis deals with variol methods of design and manufacture of printed circuit boards and thein advanteges and disadvantages. A part of this thesis is construction of a prototype for the domestic production of printed circuit boards. This prototype will be controlled by a microcontroller ATmega32 with intelligent LCD display, which operations will be ensured by right involvement of all components and by right programming in the language Bascom.
|
guest ::
