|
|
Design of special purpose tool for sag measurement
Mejzlík, Jiří ; Vetiška, Jan (referee) ; Houška, Pavel (advisor)
The aim of the thesis is to design a special purpose tool for sag measurement. Three possible solutions are proposed, for each the production cycle time is calculated and its approximate costs are estimated. The best solution in terms of a trade-off between both key quantities is suggested. Next part of the work deals with the selection of suitable drives for the manipulator as well as of the other components for the whole electrical device. Finally, a possible automated control of the complete machinery, including the electrical wiring diagram, is presented.
|
|
|
Control and visualization of techlologic process via IPC
Buchta, Luděk ; Libor, Matys (referee) ; Dvořáček, Martin (advisor)
The aim of this bachelor’s thesis was to acquaint with techniques and technologies used in the control and visualization of technologic processes. The industrial PC, PLC and Automation Panels from the company B&R was used on control of the technologic process in laboratory E541. Designed and implemented control algorithm contains three discrete controllers. The standard OPC is used for communication. Visualization for control workplace is created in the Program Control Web. Visualizations for operator workstations are created in the program Automation Studio. These visualizations are used to transfer information from the technological process.
|
|
|
Multi-axis Engine Control in Intelligent House
Uherka, Bohumil ; Malounek, Petr (referee) ; Chomát, Luděk (advisor)
The bachelor thesis handles with multi-axis drives with electronic cam and electronic gear. Result of this project was to develop a model of entry gates and multi-axis drive control program. This issue was demonstrated on the entrance gate engines controlling the smart house. The model of entrance gates was constructed using a stepper engines. The model was connected by the input and output modules with Power Panel (programmable logic controller with touch screen), on which the visualization was created. Power Panel at the same time governed servoamplifiers ACOPOS. These servo amplifiers with synchronous engines correspond to engines controlling the actual gates.
|
|
|
Double arm juggling machine movement cotrol
Janeček, Jan ; Marada, Tomáš (referee) ; Němec, Zdeněk (advisor)
The diploma thesis is a part of the project Intelligent double arm juggling machine. The project is divided into two diploma thesis. This thesis deals with the motion control of juggling arms. Information about hardware and software resources used in this project is in the first part of thesis. There is explanation of the control loop, explanation of used communication protocols and implementation of program proceeding in the second part of thesis.
|
|
|
Intelligent double arm juggling machine
Mertlík, Daniel ; Němec, Zdeněk (referee) ; Marada, Tomáš (advisor)
This thesis describes the design and implementation of device called Intelligent two-arm juggling machine. The role of the demonstration project is to control rotational movement of the arm so that the concept of the machine there to swap the ball to the opposite side shoulder. The project is divided into two theses, which this proposal addresses the above mentioned tasks, the machine and place the second level ofcooperative governance through visualization.
|
|
|
Automatic line for asembling and testing car key
Ščerba, Radek ; Kovář, Jiří (referee) ; Kahánek, Lukáš (advisor)
Main topic of this master's thesis is proposal of automatic line for bulding and testing keys for electrical ignition of cars. In the first part of this master's thesis you can see options of layout machines and proposal of two layouts. In this part you can see all actuators and senzors with detailed description of using in application, too. Next part is about software, communication between each components and description of visualization. Last part is about recapitulate of topic and evaluation building of machines with ideas for improvement this line for future.
|
|
|
Motor arm control and object weight determination from dynamic motion
Pour, Radek ; Marada, Tomáš (referee) ; Němec, Zdeněk (advisor)
The diploma thesis is a part of the project Intelligent weighting and sorting of goods. The principle of measuring of weight from movement dynamics with derivation calculation relation is detailed described in the first part. The description of used automation means is also in the first part of the diploma thesis. The second part includes design of three adaptive control systems for controlling DC electromotor’s arm, communication principles between programmable logic controllers and designed code of program.
|
|
|
Dedicated machine for forming of jerrican spouts
Podolan, Luděk ; Ing.Pavel Cícha, Evropský polytechnický institut, Kunovice (referee) ; Novák, Vítězslav (advisor)
The aim of this diploma thesis is detail description of theory, design process and final realization of single-purpose machine for pressing canister funnels. Theoretical section of this work covers manufacturing standards of the electrical cabinets, options for the single-purpose machine control with focus on the programmable logic controller e.g. PLC, PLC control program concept with definition of the main alarm states and description of two types of electrical cabinet. Practical part contains description of the electrical cabinet, its block diagram, photo documentation of the wiring (chapter 4.), chosen PLC type, its advantages and detail program description using Ladder diagram notation, communication with operator realized with touch LCD panel, programming environment for this LCD panel and program realization process. Finalized machine description and its photo documentation in manufacturing process is covered in the end. This diploma thesis is based and extends previously successfully defended semester project.
|
|
|
Adaptive optimal controllers with principles of artificial intelligence
Samek, Martin ; Malounek, Petr (referee) ; Pivoňka, Petr (advisor)
Master’s thesis describes adaptive optimal controller design and it’s settings. Identification with principles of artificial intelligence and recursive least squares identification with exponential and directional forgetting are compared separately and as part of controller. Adaptive optimal controller is tested on physical model and compared with solidly adjusted PSD controller. Possibilities of implementation of adaptive optimal controller into programmable logic controller B&R are show and tested.
|
|
|
Controling the dust exhaust of smeltery for recyclation of aluminum waste
Jakubský, Ondřej ; Nadrchal, Zdeněk (referee) ; Trnka, Vladislav (advisor)
The work deals with controlling and visualizing technology of dust exhaust of smeltery for recyclation of aluminum waste. In the first part of the work are analyzed the different ways of automatic control. Based on the analysis is proposed control system configuration, algorithm of control, communication interfaces and sensors of alarm, measurement and regulation. The second part deals with visualization and remote administration of control system. On the basis of selection for the visualization software is designed and implemented a system that provides visualization of technology, the archiving of measured operating values, events and errors.
|
guest ::
