|
|
Construction draft periphery timber structure in low-energy and passive standard
Přinosilová, Gabriela ; Múčka, Martin (advisor) ; Vladimír, Vladimír (referee)
The diploma thesis is focused on the design of the timbered wall composition considering the low-energy and passive standard. Main goal of the thesis is to calculate heat transfer coefficient U for four different types of the timbered walls and consequently evaluate if they comply with the requirements of low-energy and passive standards. The calculations show that the traditional concept of the timbered structures is inefficient for the mentioned energy standards. The minimal thickness of the timbered wall which will satisfy the requirements of the energy standards for low-energy and passive structure were calculated for the proposed four types of wall composition. For the calculations methods according to the applicable standards ČSN were used. To verify accuracy of these method and the performed calculations simplified numerical model was made in finite element software.
|
|
|
Calculation of temperature field of the busbar bridge
Měrka, Ivan ; Maxa, Jiří (referee) ; Vyroubal, Petr (advisor)
This term project’s aim is to theoreticaly analyze thermal phenomena and losses in electrical power devices, describe the design and application of UniGear ZS1 type switchgear, put together a computer simulation model for thermal calculations of current and optimized solution and finally to discuss obtained results and compare them with experimentally acquired values. The main objective of this project is to determine, whether simulation is a viable and reliable enough method, that it could replace the costly real life physical testing. Modelling of the progress of thermal processes in different parts of the examined busbar will be done in computer aided design program Solidworks and its simulation plugin Flow Simulation.
|
|
|
Thermal characteristics of power conductors
Měrka, Ivan ; Novotný, Jan (referee) ; Orságová, Jaroslava (advisor)
This bachelor’s thesis aims to theoreticaly analyze thermal phenomena in power conductors and construct a simulation of thermal characteristics of conductor under load. First, power conductors and their classification is discussed. Following are elementary information in thermomechanics and ways of heat transfer. Next chapter talks about different ways of cable laying with respect to their steady temperatures and the design of conductor’s cross section. Further chapter focus on unsteady state of the heating conductor, analysis of Van Wormer’s method for acquisition of thermal characteristics and in this method the model for parameterized conductors is based. In conclusion the simulated results are verified and compared to the results of practical laboratory measurement.
|
|
|
Determination of thermal properties of gloves by means of thermal manikin
Pidrová, Kateřina ; Pokorný, Jan (referee) ; Fišer, Jan (advisor)
This diploma thesis is focused on determination of thermal properties of gloves by means of thermal manikin. The background research with relation to this topic together with derivation of the computational equations used for the following measurement are presented in the first part. The most significant part of this work is suggestion of procedure for measuring the heat resistance of gloves with thermal manikin based on procedure from ČSN EN 511. This methodics was verificated with 5 pairs of gloves together with analysing the uncertainties and testing the repeatability of this measurement. This work also contains the outline for all of the measured pairs with posibilities of their usage in specific situations and surrounding air temperatures. At the end of this work is mentioned brief summary of achieved results.
|
|
|
Apparatus for measuring the thermal resistance of the gloves
Pelikán, Jakub ; Fišer, Jan (referee) ; Hejčík, Jiří (advisor)
This thesis deals with common problem health protection at work. Namely hand protection during the work in very cold environment. It’s an analysis of materials suitable for apparatus used for measuring the thermal resistance of the gloves. There was analysed a range of materials. Every single sample was tested for heat conductivity and afterwards was assessed the suitability of materials. Heat was generated by electricity. Ocured heat fields was assessed with thermocamera. After performed experiments of carbon fiber we haven’t reached any satisfying results which we could use for manufacturing of this device. On the other hand kapton film has given very interesting results which we would recommend eventually. Kapton film needs to be modify according to the method listed in the conlusion. This thesis gives us a clear overview and inspiration for additional research of this device. It finds it’s place in research facilities and companies manufacturing protective clothing.
|
|
|
Evaluating and modeling of fouling process in heat exchanger
Čirka, Martin ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
This diploma thesis discusses fouling processes and mechanisms of industrial heat exchangers, with focus on shell side fouling of heat transfer area by flue gases, and eventually taking fouling into account, or more precisely its modeling and predicting by calculation. Thermal-hydraulic design of heat exchanger is focused mainly on shell side, as flue gases are dominant process medium in terms of fouling and heat transfer. Based on available operational data of evaluated industrial heat exchanger, specific process has been developed to determine by calculation, or more precisely predict change of fouling factor throughout operational period of heat exchanger. Usage and various options of this specific calculation technique are being discussed in conclusion, whether there is a potential to use this technique regarding more complex operational inputs or prediction of fouling process for different operational regime of heat exchanger.
|
|
|
Controlled laboratory supply
Štibraný, Miroslav ; Petyovský, Petr (referee) ; Macho, Tomáš (advisor)
Master’s thesis deals with design of laboratory supply with precise voltage and current measuring. At the beginning it presents properties, advantages and disadvantages of linear and switching supplies, based on these facts it chooses a linear type of regulator. The design continues with detailed description of power and control analog and digital circuits. The thesis includes description of taking control over the supply from the front panel or through computer. The last part is devoted to measurement results and to presentation of some static and dynamic parameters of the designed supply.
|
|
|
Basic thermal properties tester
Janečka, Marek ; Buršík, Martin (referee) ; Řezníček, Michal (advisor)
This work deals with metering heat feature of different types unyielding materials with the help of thermodynamic sensor. Here is above all surveyed, whether it is possible by the help of thermodynamic sensor mete heat conductivity and thermal resistance given to materials and subsequently accordingly to this to prove in part determine from measured results about what type of material walks.
|
|
|
Thermal properties of the window frame and the connection joints
Hejný, Lukáš ; Hraška,, Jozef (referee) ; Doc.Ing. Miloslav Bagoňa, Ph.D (referee) ; Štěpánek, Ladislav (referee) ; Kalousek, Miloš (advisor)
This thesis deals with the solution problem of fitting a window in the wall, especially for passive houses. It provides options to optimize the window connection joints, improve the thermal transmittance of the window frame, thereby reducing the total heat loss through the window. In the first part of the thesis is a research literature on the windows and heat technical and physical mechanisms. Are described equations and physical processes taking place in the windows and related building structures. This section describes the basic points in history, technical description of windows, etc. and present ways of assembly Installation the window and the influence of the thermal properties of the heat loss. The next part deals with the description of the work and the results obtained in the course of doctoral study. Describes the main objectives of the dissertation thesis, calculations and simulations of temperature fields and the results of the calculated values. Furthermore are described and analyzed measurement data and compared with the calculated values. At the end dissertation thesis are given opportunities to improve the current solution regarding the heat transfer coefficient of the frame, the optimal way of installation fillers windows in the perimeter wall and improve the thermal properties of the connecting joint.
|
|
|
Sports complex
Touš, Jakub ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The main focus of this thesis is to design the expansion and modernization of a sport complex "U Jezu" for a sport club TJ Roztoky. This thesis is consisted of a study for a territorial agreement. In this study, there are indicated a formation of two playing fields with the artificial surfaces, beach volleyball court proposing two building objects as a base for the entire complex, which consists of garages, storages and a main building. A more detailed design was created for the main building. As the supporting structure of the object, the transverse wall system completed with outdoor columns supporting the cantilevered portion of the ceiling tiles, which are mainly unidirectionally reinforced concrete floor slabs. The supporting structure is based on the strip foundations. The designed building object has two-above ground floors and a ground floor, which will be created by embedding the building object into the hill side. The ground floor is designed for the relaxation and the leisure purposes. Moreover, there is also a technological equipment necessary for the operation of the facility. On the first above ground floor, there are designed locker rooms for athletes, a club room with a kitchen and an accommodation unit for a manager of the complex. The second floor is for the accommodation. There are designed rooms with lounge and office of the president of the sport club. Part of the second floor consists of a terrace. For the roofing, a flat roof with a single-classic sequence of layers is designed. In this thesis, the static is partially solved. Furthermore, the object is evaluated in the terms of lighting, acoustic and thermal requirements as well as requirements for the fire safety of buildings.
|
guest ::
