|
Possibilities of hexavalent chromium reduction within portland cement hydration
Mončeková, Miroslava ; Koplík, Jan (referee) ; Šoukal, František (advisor)
The issue of Hexavalent chromium toxicity to Portland cement hydration is a very actual these days. It takes much effort to obtain a cement containing Cr(VI) less than 2 ppm. The primary objective of this diploma theses is to find appropriate reducing substances and specify their efficiency, as well as to make an attempt to optimize their dosage. As reducing substances there were plumbed sulphites and tin(II) salts. The influence of reducing substances applied to the hydration and cement properties were validated by strenght tests, the calorimetric measurement and the volume-variation measurement. And also the changes in hydration products microstructure of Portland clinker after the gypsum replacement by sulphite ions were plumbed. The study of microstructure is based on SEM and XRD methods.
|
|
Influence of calcium sulphate type on hydration of Portland cement
Šimčíková, Ivana ; Šiler, Pavel (referee) ; Šoukal, František (advisor)
My bachelor thesis deals with the study of the influence of calcium sulphate types on the hydration of Portland cement. Hydration is performed at 15 °C, 25 °C and 40 °C. In the theoretical part we find a description of the hydration of Portland cement and the influence of the type and amount of gypsum on the hydration period. The experimental part contains the preparation of samples for measurement and the principle of calorimetry including a description of the calorimetric curve. The data obtained from the calorimetric curve was processed into ternary diagrams for illustration. The diagrams show that the more calcium sulphate is soluble, the shorter the induction period, the times of reaching the minimum heat flow and heat flow at the maximum silicate peak will have. Further, the diagrams showed that as the amount of water in sulphate increases, so does the amount of hydration heat released.
|
|
The thermodynamic stability of etringite
Magrla, Radek ; Durica,, Tibor (referee) ; Bílek,, Vlastimil (referee) ; Brauner,, Josef (referee) ; Fridrichová, Marcela (advisor)
The theoretical part of this doctoral thesis summarizes the current knowledge of portland cement and its manufacturing technology, information of FBC ash, Aft phases, AFm phases and the current knowledge of thermodynamic stability of ettringite. The practical part of the doctoral thesis focuses on manufacturing of ettringite based on yeelimite clinker, studying the influence of environment on thermodynamic stability of ettringite and manufacturing of ettringite by direct addition of calcium hydroxide and aluminum sulfate.
|
|
Possibilities of affecting the portland cement hydration by the addition of fluidized ash
Nehybka, Josef ; Bartoníčková, Eva (referee) ; Opravil, Tomáš (advisor)
This work is focused on study of possibilities of influence of hydration of Portland cement with an admixture of fluid ashes. The work deals with the tests with fluid filter ashes and milled fluid bed combustion ashes. Predominantly, a calorimetric measurement is used for study of admixtures. The prepared samples were found out on their mechanical parameters as the tensile bending strength and compressive stress. X-ray powder diffraction was used to determine of phase composition of the raw materials and created samples after hydration.
|
|
Reduction of hexavalent chromium in cement binders
Hrubý, Petr ; Šoukal, František (referee) ; Kalina, Lukáš (advisor)
The issue of hexavalent chromium contained in cement binders and the possibilities of its reduction are very current, due to the toxicity of Cr (VI) and constantly stricter regulations of the EU. The effort of achieving a cement binder with Cr (VI) concentration lower than 2 ppm and keeping this concentration unchanged during the long term storage is a frequently studied issue which needs to be solved. Requirements are put on the low cost for industrial use and without inducing changes of final properties of cement binders. A reducing agents based on iron (II) sulphate monohydrate potentially combined with some additives were studied in this study. The efficiency of reducing agents was analysed by commonly used UV-VIS spectrophotometry technique which uses 1,5-diphenylcarbazide as an indicator. The influence of added reducing agent on the mechanical properties was noticed by compressive strength test.
|
|
The influence of aggregate on the properties of high performance concrete.
Bezděk, Ondřej ; Krátký, Josef (referee) ; Šiler, Pavel (advisor)
This bachelor thesis is focused on the influence of aggregates on the mechanical properties of high-performance concrete. The flexural strenght and the compressive strenght were observed after 1, 7 and 28 days. The process of hydratation was monitored using isoperibolic calorimetry. Laser particle size analysis of aggregates was also performed. As materials were used: Portland cement CEM I 42,5 R-Sc Mokrá, finelly ground silica sand, calcinated bauxite, fine test sand ČSN EN 196-1, medium test sand ČSN EN 196-1, rough test sand ČSN EN 196-1 and polycarboxylate superplasticizer Glenium Ace 40.
|
|
Modification of dry stuff with lime sludge
Švec, Jiří ; Kovářová, Alena (referee) ; Ptáček, Petr (advisor)
In modern point of view of waste management is desirable to effectively process the grates possible amount of wastes. Sediments from cleaning of mined lime stones contains a lot of clay components, but there is also indispensable share of soft calcite. Especially this can be use in following processing. After firing, where is necessary to set suitable temperature, arises a mixture of soft calcinated lime and remaining dehydrated mineral components. This calcinated mixture could partially replace used binders in dry stuffs.
|
| |
|
The influence of barium oxide on the formation and properties of portland clinker
Zezulová, Anežka ; Šoukal, František (referee) ; Opravil, Tomáš (advisor)
Portland clinker is thanks to its large-scale production a continuously studied topic. Clinker, or Portland cement, is used for construction purposes, or for insulation and special applications. One of these special applications could be shielding of different types of radiation by making use of the content of barium ions. The present master’s thesis examines the influence of barium oxide on the formation and properties of Portland clinker, which could be, by incorporation of barium ions into the system, used as a binder for buildings resistant to various types of radiation. Barium sulfate and barium carbonate were added to the raw meal in order to prepare clinkers with different content of barium oxide. The effect of barium on the formation of clinker phases was studied (by XRD – Rietveld analysis and by the microscopic point integration), as well as the effects on the variations of temperature of the phase formation (TG-DTA) and the rate of alite formation under isothermal conditions. Furthermore, the ability of barium to become a part of clinker minerals was studied by SEM with EDS, and the solubility of barium phases by ICP-OES. The hydration of clinker minerals containing barium was studied by isothermal calorimetry.
|
|
Influence of ettringite formation on mechanical properties of zinc doped cements.
Kunovský, Ondřej ; Matějka, Lukáš (referee) ; Šiler, Pavel (advisor)
This bachelor thesis deals with the study of the effect of hydration accelerators in cement pastes doped with zinc ions. Their influence on hydration reactions, mechanical properties and the amount of ettringite formed was studied. CEM I 42.5 R cement was used and zinc was added in the form of ZnO in an amount of 1 wt. % of Zn relative to cement content. Strengths were measured over a time horizon of 98 days. In addition, analyzes by SEM, XRD and DTA methods were performed on selected samples to determine the amount of ettringite. It has been found that compressive strengths can also decrease during hydration. At this decrease, SEM, XRD and DTA showed a reduction in the amount of ettringite in the sample.
|