|
|
Pillar jib crane
Manda, Pavel ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with the construction design of pillar jib crane with lifting capacity 1.300 kg, crane radius 3.000 mm and maximum lift 7.000 mm. The thesis contains design of supporting elements including strength analysis, assembly drawing of pillar jib crane and jib’s detail drawing. The thesis also deals with choice of suitable hoist.
|
|
|
Pillar jib crane
Flídr, Lukáš ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the structural design of the column crane, including important strength calculations. This thesis also includes a selection of a suitable hoist and drawing documentation in the form of a crane assembly and a pole drawing.
|
|
|
Pillar jib crane
Flídr, Tomáš ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with an construct proposal of derrick (crane) with these technical parameters: lifting capacity is 1000 kg, unloading lenght of its beam is 3000 mm, height of lifting is 7000 mm, maximum height of construction is 4000 mm. The thesis consists of strenght calculation for range of the main carrying components, suitable fittings, and technical drawings of this crane and blueprint of unloading device.
|
|
|
Wall crane
Zapletal, Petr ; Jonák, Martin (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with the constructional design of wall crane with 2500 mm crane radius and lifting capacity 1000 kg. Thesis includes design of crane, the choice of components, control calculation according to applicable standards and choice of a suitable hoist and trolley. An integral part of the thesis is design documentation.
|
|
|
Jib type crane
Knapec, Tomáš ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor's thesis is the design development of jib type crane with single knuckle. The target of this thesis is to develop a technical report including important strength calculations, schematic hydraulic circuit design and creating complete drawings of jib type crane that is designed for installation on mobile devices. Desired parameters of this crane are allowing horizontal rotation in 360° a vertical between 90° and maximum load capacity 1 700 kg.
|
|
|
Hydraulic lifting equipment for the tractor
Onderka, Jan ; Zeizinger, Lukáš (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis focuses on designing a lifting device for a tractor three-point hitch. A short research of similar lifting devices was carried out. The concept is designed and supported by analytical calculations of dimensional and functional properties. The strength calculations are carried out in accordance with the standard, and critical areas of the device are checked. The work contains 3D models and plan drawings.
|
|
|
Pillar jib crane
Dias, Aleš ; Řezníček, Milan (referee) ; Malášek, Jiří (advisor)
The aim of my work is conceptual design pillar jib crane including important strength calculations. Payload is 1500 kg and length jib is 4 000 mm. The pillar jib crane is working near the wall and angle turning is 180°. The work also includes the selection lifting gear with manufacturer´s catalog.
|
|
|
Hooclift NKH 8A340
Doleček, Ladislav ; Ospalík, Zdeněk (referee) ; Kašpárek, Jaroslav (advisor)
This master thesis analyses hook loader NKH 8A340. For calculation of load states was used the dynamic simulation in program MSC.ADAMS. This results were used like a input data to solve the construction with finished element method. After evaluation of results were made design changes of hook loader. Part of this thesis contains drawings of modified parts of hook loader.
|
|
|
Pillar jib crane
Kramoliš, Robert ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is constructional proposal of jib crane with capacity of load 1000 kg, unloading length of its beam is 4000 mm and lift height 4900 mm. The thesis contains strength calculations and selection lifting gear. A part of the work is also drawing documentation.
|
|
|
Pillar jib crane
Dvořák, David ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deal with the construction design of derrick crane with these technical parameters: lifting capacity is 1700 kg, unloading length is 3150 mm and height of lifting is 5850 mm. The thesis contains strength calculations for proposals major structural elements and selection of suitable hoist. A part of the work is also assembly drawing and detailed drawing of pillar.
|
guest ::
