|
|
Design of Load Bearing Concrete Structure
Tuchyňová, Andrea ; Šimůnek, Petr (referee) ; Štěpánek, Petr (advisor)
This diploma thesis is dealing with frame multi-storey garage structure, mainly with its slab. According to the assignment there was made a parametrical study. It contains the comparision of three construction versions: solid slab, slab with void formers Cobiax and prestressed concrete slab. At the chosen variant the 3D mathematical model, which was created in software Scia Engineer, was specified and the construction was designed according to ultimate limit state and serviceability limit state. The outlet of this thesis is structural design and drawings with all designed items
|
|
|
Parking building
Růžička, Jan ; Sýkora, Karel (referee) ; Bajer, Miroslav (advisor)
The aim of the thesis is to design a steel structure of the parking building in the center of Brno. The plan dimensions of the building are 29 x 77.5 m including a missing corner of the dimensions 5 x 12.5 m in the southeast part of the construction. The construction of the parking building has 4 above-ground floors with the same layout and the fifth floor situated only in the middle section of the construction. Each floor is 3.5 m high. The total height of the construction in the place of the roofed part of the fifth floor is 17.5 m, otherwise 14 m. A spatial frame is the main load-bearing part consisting of 7 fields in the longitudinal direction and 5 fields in the transversal direction. The spatial frame is formed of columns and longitudinal and transversal girders. Steel-concrete composite joists are pin-supported among longitudinal girders. The construction of the parking building is solved in three versions considering different placing of columns to the base structure and different placing of longitudinal and transversal girders to the columns. The resulting draft is worked out in details. Roof cladding will be made using sandwich panels and walls will be made out of glass panels. The calculation has been done in Scia Engineer 2014 program and by manual calculation.
|
|
|
Ramps for trailer for buildings machines transport
Dvořáček, Michal ; Ješina, Miroslav (referee) ; Škopán, Miroslav (advisor)
The aim of my dissertation on the subject of raids on trailer for transport of construction equipment is to propose a functional concept of rear split folding ramps for trailer construction machines with tracked and wheeled landing gear. Raids are designed as a two-part, hydraulically tilting. With an appropriate mechanism to ensure a correct function of the ramp end part at tilting. Maximum weight of the machine is 21 000 kg and departure angle is 10 °. This thesis was composed with cooperation SVAN ltd.
|
|
|
Hotel in Přerov
Blaha, Jan ; Rozehnal, Miroslav (referee) ; Štěpánek, Ladislav (advisor)
The diploma thesis deals with a project documentation of hotel building in Přerov. The object is designed as a detached building with one basement and four floors. There is an underground garage and technical rooms of the hotel situated in the basement. In the first floor, there are entrance hall, administrative part, restaurant and its hinterland. Another ground floors are designed to accommodate guests. The structural system is reinforced concrete skeleton. The perimeter wall is building from clay bricks. The object is covered with two flat roofs.
|
|
|
Junction on Motorway R52 near Moravany
Lička, Vojtěch ; Novák, Jan (referee) ; Holcner, Petr (advisor)
My diploma thesis deals with a connection of Videňská street to the future residential district situated between Přízřenice and Modřice. The level of this thesis is a technical study. The main topic of the thesis is a design of an interchange on the Vídeňská and Moravanská streets. The thesis is focused on a technical verification of variable ramps’ connections from Vídeňská street to Moravanská street. Another important point of the thesis is an improvement of security quality of cycle traffic and a creation of a traffic junction of the city transportation system in this area. The SWOT analysis was applied to evaluation and selection the most advantageous variant of the variants. Depending on SWOT analysis, the thesis is focused on more detailed design of the most advantageous variant.
|
|
|
Bridge on a interchange in Brno
Kyzlink, Lukáš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
Diploma thesis describes the design and assessment of bridge supporting structure on the ramp in Brno. Road bridge crosses the I/42 road and railway. The bridge is part of the VMO Brno. The structure is designed from prestressed concrete. Assessment of construction is carried out in accordance with applicable European standards. When designing the support structure is taken into account the gradual construction of the bridge. The thesis includes design calculation, drawing documentation and 3D visualization.
|
|
|
Bridge on a ramp
Otevřel, Rostislav ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
Thesis describes the design and assessment of a plan view of a curved road bridge, which is a part of an elevated crossing transferring directional divided communication and tram line of public transport in Brno. There are four variants of cross sections designed, from which is selected bicameral cross section with arched angled bottom plate, which should be aesthetically pleasant to impress in an urban environment. Static calculation is processed and design is assessed by current European standards. Then clear and detailed drawings, the process of construction and visualization of the bridge are processed.
|
|
|
Design of the speed-way bridge structure
Nádvorník, Ondřej ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
This Master's thesis deals with the detailed design of the supporting structure of the bridge with two sections, with the rise in the direction of the intermediate support, and cross-cut single-beam construction. The supporting structure is designed from the prestressed concrete, prestressing losses are accurately quantified. It also deals with the assessment of pillar base threshold and pilot groups. The assessment was carried out according to the limit states.
|
|
|
The link-up of the Jihlava city Southeastern by-pass - transport junction of main road I/38 and major road II/523
Kozák, Petr ; Kutín, Ivan (referee) ; Smělý, Martin (advisor)
This diploma work deals with researching study of transport junction of main road I/38 and major road II/523 and than link-up of the proposed Outer ring road (VMO) and Southeastern by-pass (JVO) routes of region capital Jihlava, district of Jihlava, Vysočina region. Road structure will solve designed staged link-up of aboved mentioned roads according to their construction schedule. The design takes into account current roads and completed stages, with respect to minimum costs. Road structure is situated on Czech-Moravian Highlands. Its terrain is hilly, pondy and composed of agricultural parcels. The main purpose of this design is steady link-up of all considered traffic flows in the given locality.
|
|
|
Bridge on a ramp in Brno
Diviš, Dalibor ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
Thesis involves designing and analysis of horizontally curved bridge contruction with chamber-shaped profile and oblique side walls. The object is a part of fly-over crossig at VMO Brno. Calculations are according to actually valid standards ( Eurocodes ). Thesis gives a basic look at the problematics of horizontaly curved bridge construction, including solution of prestressing cables´ 3D-tracking with usage of common software.
|
guest ::
