|
|
System wiring and the power balance
Horenský, Martin ; Bátora, Branislav (referee) ; Macháček, Jan (advisor)
Bachelor thesis deals with the theoretical part of the general problem of system wiring. The introductory part includes a general introduction. Gradually are described differences from classical wiring, to compare the advantages, disadvantages and cost. Shortly is described historical development from the first attempts to currently solution used by manufacturers. Subsequently used systems are divided into several groups and described. In the next chapter is performed research most famous electrical system from different manufacturers. In thesis there are described systems iNELS and Ego-n in detail. For each system are described basic functions, linking structure, used bus, the method of programming, a summary of advantages and disadvantages. In addition is made a brief description of system components. The practical part is focused on establishing own consumption of system wiring components in the model family home. Calculations and measurements are performed for three systems - iNELS, Ego-n and KNX. First, there are designed requirements that should meet the installation. Based on the requirements is created list of components of the systems installed - for each installation according to appropriate system.. From technical catalogs are designed theoretical input powers of each installation. The following is a test procedure for measuring educational panels. Results of measurements are processed and compared with catalog data for each component. In addition input powers are calculated from individual installation measured values. Results obtained from the measured and theoretical data are compared. From the each calculated power consumption is determined annual payment for consumption the system wiring. For each measurement system are recorded and reported data transfers through the bus. A complete evaluation of the results is shown in conclusion.
|
|
|
Design of application of radio-frequency control system Xcomfort in modern building
Marek, Jan ; Pěcha, Jiří (referee) ; Bátora, Branislav (advisor)
This bachelor thesis focuses on a reconstruction of an electro-installation used in a family house and an implementation of a radio frequency system xComfort for an intelligent electro-installation produced by Eaton company. This system was chosen due to customer´s request and also for its easy service. The first part of the thesis describes a history of an intelligent electro-installation with a description of a radio frequency system including its basic components. Next, there is an overview and basic characteristics of other producers´ systems and also their comparison. The thesis also provides main features of bus systems and a difference between the used radio-frequency system xComfort compared with a bus system. The advantages and disadvantages between the bus bar system and the radio frequency system are clearly described there. The major part of this work is focused on a practical design of the intelligent electro-installation in a specific object. In the appendix there is a technical documentation needed for the realisation of the building. This documentation includes a layout of used components controlling lights, Venetian blinds, heating and line schemes of switchboards. The design also includes a program that controls individual components formed by a software Eaton RF-System.
|
|
|
Bus wiring systems for complex building management
Mokrý, Lukáš ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
The aim of my thesis is to examine current opportunities of bus wiring systems for complex building management, mainly its power and economic evaluation. It can be simply called intelligent electrical installation. I will examine two systems from INELS and ABB company. These systems contain functional components, mainly modules and controllers. By means of other materials, I’ll create a panel. Components will be placed there and electrically connected. After this, systems will be put into operation and programmed by means of their software. The next step is measuring of quatities during the various conditions of systems and consumption, which is one of the main aims of the thesis. Two apparatuses will be used for measuring. This thesis itself will contain theoretical analysis of systems, their description, using the way of operation and main advantages and disadvantages. Single components and complete process of measuring and working in laboratory will be described. An overall evaluation and comparison of the systems from various points of view, including the price, will be put together from results.
|
|
|
Basic Configurator of INELS Systems for End Customers
Kočíř, Pavel ; Konečný, Jiří (referee) ; Drahanský, Martin (advisor)
The theme of this bachelor thesis was to design web-application for configuration for the system of intelligent electrical INELS from company ELKO EP s.r.o. The first section explains the concept of intelligent wiring systems and the system INELS. Further Also it analyze the possibilities of programming languages that I use when developing the applications. The second part describes the design, implementation and results of testing the application for configuration.
|
|
|
Design and computer control of intelligent wiring system Ego-n
Hubálek, Michal ; Macháček, Jan (referee) ; Bátora, Branislav (advisor)
Bachelor thesis addresses the issue of smart wiring for household management. It is focused primarily on the modern system of Ego-n by ABB s.r.o., which is commonly available on the Czech market. It first explains the differences among individual intelligent electrical systems that are used here in our country. These systems are divided into groups and briefly described. This is followed by an introduction into the Ego-n system, formulation of basic principles of the system, its capabilities and applications. Most of the work is focused on the production and "Revival" of the laboratory panel of intelligent electrical set Ego-n. Laboratory panel is to demonstrate the functions of controlling the lighting, blinds, heating and other circuits. Programming of the laboratory panel can be manual or made by computer. For both options there are laboratory instructions written for practicing the various functions. The work also includes budget and a list of materials for the manufacturing of the laboratory panel and its wiring.
|
|
|
Application for Control of Intelligent Electroinstallation iNELS for the Platform iOS
Mataj, Lukáš ; Hrubý, Martin (referee) ; Drahanský, Martin (advisor)
This masther's thesis aims at familiarization with the development of mobile application that can control intelligent electrical installation iNELS and its multimedia superstructure iMM. The thesis also describes the common development for the iOS platform and explore the possibility of communication with both controlled systems. Two important communication protocols will be described - EPSNET and XML-RPC. The resulting product is evaluated at the end and its behavior in full operation is described too.
|
|
| |
|
|
Computer control and programming of elements of intelligent electrical instalation KNX
Mašek, Jakub ; Baxant, Petr (referee) ; Bátora, Branislav (advisor)
The goal of this Bachelor thesis is to introduce to students the basics of working with the modern possibilities of buildings electroinstallation with the help of the KNX system. On the following pages is described a brief history of the system, the way it has developed, which organisations have involved in the developement and the needs for which it was created. The next section is focused on the system topology, the scructure of the network and important elements appearing in the decentralised system. Further is the thesis concerned with the principles of telegram communication, it’s process and available software support for the KNX system. The last practical part deals with programming in the KNX system and offers four different practical excercises created for the available laboratory control panel. Each of the excercises includes a problem, technical drawing of electical circuit and the problem analysis, which serves as a manual to solve the excercise step by step. Single excercises are designed to logically and by difficulty follow from lighting circuits, heating and cooling to eventually deleting and preparing the laboratory control panel for next lecture.
|
|
|
Design of intelligent building with modern system Ego- n
Kočí, Martin ; Šlezingr, Jan (referee) ; Bátora, Branislav (advisor)
The thesis resolves an electro-installation project for an intelligent home. The system chosen is the Ego-n modern electro-installation system, a product of ABB, s.r.o. which is generally available on the market in the Czech Republic and in Slovakia. In the first part of the thesis the difference between a conventional and an intelligent electro-installation is described, and the basic principles of the Ego-n system are formulated together with the range of use. Also included is a brief profile of the basic components and for some of them specific options for configuration and operation in practice. The work also describes the principal advantages and disadvantages of the Ego-n system, especially from the point of view of the user of the building. The reference to communication in busbar intelligent electro-installations is conceived as an overview, designed to give a general idea of busbar processes. The majority of the thesis is aimed at a practical design of an intelligent electro-installation in a specific building. Apart from the text where the project is briefly described and explained, all the technical documentation necessary for the realisation of the building is produced in the appendices: a ground plan drawing with the electro-installation components plotted in, together with drawings of the switchboards. The project also includes a budget and breakdown of materials.
|
|
|
Demonstration examples with KNX/EIB
Křivka, Martin ; Zuth, Daniel (referee) ; Marada, Tomáš (advisor)
This diploma thesis was created as a support for Building automation course, at the Institute of Automation and Computer Science of the Faculty of Mechanical Engineering at Brno University of Technology. The aim of this diploma thesis is to get acquainted with elements of intelligent electrical ABB i-bus® KNX/EIB and create tasks suitable for laboratory teaching. Subsequently, use the communication module DataLab IF/EIB to connect KNX/EIB with Control Web system and create in this environment visualization of the status of these devices. Furthermore, using the communication module CM EIB/KNX to connect KNX/EIB with the programmable controller LOGO! and create additional laboratory task.
|
guest ::
