|
|
Module of electronic security central with Ethernet communicator
Strašil, Ivo ; Pust, Radim (referee) ; Burda, Karel (advisor)
This diploma thesis deals with a design of a burglar alarm control panel, equipped with an Ethernet interface. The thesis contains a discusson of present solutions of control panels and of present usage of Ethernet communication. An idea of sensors, directly connected to LAN, was discarded on basis of a component price survey. Finally, a new concept of the panel has been chosen. This concept allows a free definition of internal logic using a C-like scripting and provides a possibility to create a network of these panels in a LAN network, using a software-only supervising main control panel. A new control panel following this concept was designed and succesfully tested.
|
|
|
Remote-controlled switching of information systems - part II
Prečan, David ; Kapoun, Vladimír (referee) ; Herman, Ivo (advisor)
This bachelor´s thesis deals with remote communication over Ethernet interface. First, a brief survey of the existing solutions is presented. Then a remote temperature measurement using data transmission over Ethernet network is proposed. The proposed solution is described in detail including hardware and software design of an equipment for data transmission and evaluation that is based on ATmega 162/30 processor. This equipment communicates with a PC where the measured temperature is displayed. A functional sample of this equipment, which was used to verify the design, is described.
|
|
|
Virtual serial port and its safety conversion to Ethernet
Pokorný, Michal ; Krajsa, Ondřej (referee) ; Koutný, Martin (advisor)
Bachelor´s thesis try to find a solution to make virtual serial port and its safe transfer on Ethernet. Nowdays communications channels don't offer appropriate security of a whole communication. Therefore it depends on get-togethers, in order to realize this security themselves.This means ensure reliable data transfer, these data from among get-togethers encrypt in order to appropriate attacher be unable to read them in real - time, eventually to change them. As a result this Bachelor thesis is the application, which, except transfer between virtual serial port and Ethernet, insure authentication among get - togehthers communication and cipher transfer among them. As an encryption algorithm is used algorithm AES. It is concerned symmetrical cipher, which ciphers data after pages about size 128 byte.
|
|
|
Remote maintenance of the microcontroller systems
Vágner, Martin ; Hynčica, Ondřej (referee) ; Kučera, Pavel (advisor)
This thesis deals with methods of remote maintenance of microcontroller systems based on Atmel AVR family over the Ethernet interface and TCP/IP protocols. To create communication through TCP/IP, an embedded server NE-4100T is used. At the beginning, key features of the server and methods of handling with content of a program memory are discussed. The final solution is based on the bootloader method. It includes bootloader firmware and user program for PC. The hardware part covers design of interconnection electronics, DC-DC step down converter, real time clock and printed circuit board. The remote maintenance of program memory has been sucessfully solved, but the embedded server NE-4100T produces a problem with an auhentification without a sufficient solution.
|
|
|
Ni sensors to Ethernet convertor
Kubíček, Ondřej ; Fiedler, Petr (referee) ; Bradáč, Zdeněk (advisor)
This work deals with hardware and software solution for the temperature converter of the standard rezistance temperature Ni sensors with the output through the Ethernet, driven by the Rabbit microcontroller. First part of this thesis deals with the theory of the temperature measurement. There are introduced basic principles of the temperature sensors. In the next part of the work are introduced communication standard and application protocol Modbus. The rest of the work deals with the hardware concept of the converter, the control program of the converter and the program developed for the PC.
|
|
|
Analog 0-10V to Ethernet convertor
Hlúpik, Martin ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
This Master`s thesis concern with problematic of connection analog sensors with voltage output 0-10V to a ethernet communication network. Due to a quick evolution and an application ethernet nets to industry and building technologies is possible to use this solution for connection remote diagnostics and setting of existing analog sensors without bus communication interfaces on instrumentation level of field bus networks. The converter is based on Rabbit module, which can be used like webserver for setting, calibration and data recording. For purpose of wide converter use the data output will be purvey on ethernet interface by Modbus TCP and on asynchronous serial interface RS232. First part of thesis is aimed on description of existing solutions and introduction with principles of linearization and calibration of A/D converters. Description of communication standard Modbus TCP widely used in industry applications. Second part of thesis describes design a realization of project. Here is described equipment block diagram with detail description of each block and devices used. In the part of implementation is description of device firmware with program function description and control. Last part is engage with module function verification supported with plantz of measurements and tests. The thesis is ended with evaluation results, knowledge and detections found out in development of project.
|
|
|
House alarm - hardware
Vlach, Jiří ; Štohl, Radek (referee) ; Fiedler, Petr (advisor)
This work deals with the design and realization of a modular security central unit's hardware positioned in familial houses. As an operating component of the central unit is used Module Rabbit 3365 with an integrated Ethernet interface. Based on user's requirements and general requirements for electronic security system, circuit diagrams of the central unit's motherboard and power supply with a function of backup power supply are designed. The work also includes layout of a keyboard and LCD display. Printed circuit boards are designed, produced and assembled. The device is set to work. The last part concerns programming of the module Rabbit 3365 in Dynamic C. Gradually, set of operating functions for individual components of the security central unit are implemented.
|
|
|
Analog 0-20mA to Ethernet convertor
Štreit, Zdeněk ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
The dissertation deals with a design of an intelligent transmitter of a standard current signal with an Ethernet output port, an implementation of a web interface and Modbus TCP protocol for providing data protection. The introductory part describes standardized analogue technical signals with their possibilities, and characteristics of industrial Ethernet. The subsequent part provides an overview of alternatives to connect analogue signals to Ethernet while using various modules. The thesis continues with a suggestion of an analogue input side of the transmitter in connection with a digital module of Ethernet based on the Rabbit processor in connection with the RCM3200 module. The key part of the dissertation puts forward a proposal of the firmware transmitter and control web interface, shows ways of providing figures measured by the current loop via Ethernet interface for further processing. The final part is devoted to a description of current transmitter ultimate measurement.
|
|
|
Secure converter for an RS-232 standard to the Internet
Pokorný, Michal ; Mlýnek, Petr (referee) ; Koutný, Martin (advisor)
Master´s thesis tries to find a solution to make a secure transmission channel between virtual serial ports on the personal computer and the serial ports on the Rabbit RCM3700 development KIT. Today’s communications channels don't offer appropriate security of a whole communication. Therefore it depends on get-togethers, in order to realize this security themselves. This security means ensuring reliable transmission of data to be encrypted between parties so that any attacker is not able to read real-time, or eventually change them. As a result of this Master thesis is the design and implementation, which in addition to encryption algorithm provides sufficient security and authenticity of communication between the parties. As an encryption algorithm has been chosen widely used AES algorithm and as authentication algorithm has been chosen algorithm, which for authenticity requires knowledge of the secret key.
|
|
|
System for remote measuring and data storing in central database
Šváb, Jaroslav ; Pust, Radim (referee) ; Šebela, Radek (advisor)
This Master´s thesis deals with the design and implementation of System for remote measuring and data storing in central databese. The system consists of server, which collects data and clients that send data to the server. On the server is installed program Apache in which runs utility script for collecting and evaluating data, written in PHP. Data are stored in MySQL relational database and can be clearly displayed. The client consists of microcontroller ATmega16, which evaluates data from sensors. These data are then transferred via Ethernet using the HTTP protocol through the module XPort.
|
guest ::
