|
|
Apartment building
Kománková, Barbora ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The subject of the bachelor's thesis is the working-out of project documents for apartment building in the district Poštorná in Břeclav. The apartment building is built from the POROTHERM system and it has a flat roof. It is a not free-standing three-story house with an elevator and there is not a cellar. On each floor are housing units. The first floor has technical structure of the building and one unit. There are two apartment units on the second floor and also on the third floor. Covering of building is warm deck flat roof. The building is insulated with the contact system ETICS from facade polystyren. Built-up area is 219,10 m2.
|
|
|
Apartment Building
Jaroš, Daniel ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The subject of the bachelor’s thesis is project documentation of new appartment building in Znojmo on street Trentská. Designed building is similiar to surrounding existing buildings, the house is four storeyed, with basement and recessing last storey with flat roof. Every above-ground floor has three residential units of categories one to three rooms with open-plan kitchen with the exception of last floor, where’s one bigger residential unit of three room category with open-plan kitchen. Residential unit n.3 in 1st floor is designed for person with reduced mobility. Designed appartment building is built with modern technologies, load-bearing walls of above-ground part of the building are made from clay blocks in 2in1 and AKU variants. Underground part of the building is made from structural formwork with concrete and rod reinforcement. Building’s foundation will be made of cast-in-place concrete strip footing with reinforced concrete floor slab. Load-bearign part of ceiling construction is made of reinforced concrete ceiling slab. Staircase is also made as reinforced concrete slab with stair steps made of concrete.
|
|
|
Administrative building
Zajícová, Dagmar ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of the diploma thesis is the elaboration of project documentation for the construction of administrative building in Brno. The main entrance to the building is oriented to the south-east. The building is L-shaped and it is designed as a two-storey, partly with a cellar. The perimeter bearing masonry of the above-ground floors is designed from ceramic blocks of thickness 300 mm and the internal bearing masonry of thickness 250 mm. After that the basement masonry is made of concrete blocks thickness 300 mm cast in concrete. Internal non-bearing masonry made of ceramic blocks thickness 115 mm. The insulation of the building is designed as a certified contact insulation system of EPS material. The horizontal bearing structures are designed as a ceramic prefabricated rib-and-filler floor with concrete grout. The stairs are designed as reinforced concrete monolithic. The roof is warm flat roof with an extensive vegetation layer.
|
|
|
Apartment building
Handlíř, Tomáš ; Pospíšil, Jaroslav (referee) ; Kacálek, Petr (advisor)
The bachelor's thesis deals with the documentation for the construction of an apartment building. Building is a two-storey partially basement object. There are four residential units on the upper floors of the building. Each apartment is endowed with a terrace or loggia. In the basement there are rooms for household equipment such as cellars, a drying room, a common room, a cleaning room and a utility room. Project is dealing with parking problems by creating 6 parking places. Masonry longitudinal construction with use of the Porotherm system is designed for construction system. Basement construction system is masonry with permanent formwork concrete blocks. Stairs and ceiling structures are designed as cast-in-place reinforced concrete. Foundation is designed as plain concrete foundation strips. Roof is a warm flat roof with modified bitumen membrane for the main waterproof layer. The building is insulated with the contact thermal insulation system ETICS made of facade polystyrene.
|
|
|
Residential housing Troubsko
Číž, Martin ; Galata, Jindřich (referee) ; Štěpánek, Ladislav (advisor)
The aim of the bachelor thesis is a project documentation for the construction of an apartment building. Designed appartment building is new building consisting of two independents sections with separate entrances and staircases, both sections are identical only mirror imaged. Floor plan shape of each section is rectangle. Objects have two above-ground floor and one basement. There is six dwelling units in each section, four of them are 3+KK in the first floor and basement and two 2+KK in the last floor. Dwelling units located in basement have access to garden and units in above-ground floor have balcony or loggia. Last floor is recessing and thanks to that there is a place for spacious terrace. In the basement there are cellars for each appartment and utility room. Parking is provided outside the building on the paved land. Foundation construction of building is foundation strips supported by gravelly piles, masonry cunstruction is used for all the floors and ceilling are cast-in-place reinforced concrete thermal insulation of the facade is made with ETICS system. Roof is warm flat roof with PVC foil. Facade is insulated with polystyrene and in the area of fire belts there is used mineral insulation and foam glass.
|
|
|
Police district department of the Czech Republic, Brno-Černovice
Vaníček, Marek ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of the master thesis is design of a new detached office building for public administration of Czech Republic Police as a district department in Brno-Černovice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by green roof. There are office rooms, sanitary facilities, archives, interrogation rooms, pre-trial detention cells, garages, storage rooms and dog cages in the above-ground part. In the basement, there are technical facilities and shooting range backround. Structural system of the building is wall longitudinal masonry system from clay blocks. The ceiling structure is from cast-in-place reinforced concrete. The part of the building is with ventilated facade a nd rest is insulated with contact thermal insulation.
|
|
|
Technological project of an indoor tennis hall construction in Uherský Brod location
Něnička, Roman ; Venkrbec, Václav (referee) ; Diaz, Yvetta (advisor)
The thesis is focused on the technological project of an indoor tennis hall construction in Uherský Brod. It is completely embracing the construction of the hall in terms of a carcass with its roofing. It reveals a technical report that describes the construction with reference to the used construction materials, positioning in the site and looking into its impact of the building on the environment. The following aim of the thesis is also a design of a machinery needed to implement the object. It also shows an assessment of machines and mechanization transport routes in terms of road traffic, a time and financial plan of construction, a draft and design of the equipment construction site, an analysis of economic costs of the construction, a material resources plan for the construction, a technological regulation of a flat roof and a quality test scheme along the construction.
|
|
|
Selected parts of the construction-technology plan - kindergarten in Brno
Bartek, Petr ; Doubek, Rostislav (referee) ; Motyčka, Vít (advisor)
This thesis deals with a construction-technology plan of two-story nursery school in Brno, district Bystrc. Thesis contains engineering report, financial and time schedule for structures, project of construction site, noise study, technological notes and inspection and test plans for cast-in-place reinforced concrete slabs and for prestressed concrete Spiroll floor slabs, formwork study, list of main machines used during construction, time schedule, needed quantity of workers and itemized budged for carcass, budged for whole building and comparison of cranes. Moreover, in appendices are drawings of approaches and processes during construction in its different phases.
|
|
|
Multipurpose facility Strážnického v Moravské Třebové
Mazalová, Michaela ; Lipka, Miroslav (referee) ; Lipka, Miroslav (referee) ; Eliáš, Luboš (advisor)
Subject of this bachelor thesis is detail design documentation of an apartment house. The proposed apartment house is located in the Pardubice Region on the outskirts of Moravská Třebová. The apartment house is detached one, placed in slope. In the basement there is a utility room, a cleaning room, a maintenance room, a cellar and two garages accessible from the south side, where there is also access to the building. In the other three above-ground floors there are 8 dwelling units. There are always 3 flats on the first and second floor and 2 flats on the third floor. Basement is connected with upper floors by tractive elevator and a staircase. Vertical constructions are made of clay blocks POROTHERM, in the basement there is part of masonry from concrete blocks. Apartment building stands on foundation strips from concrete. Floor structure and staircase are cast-in.place from reinforced concrete and roofing is solved by warm flat roof. Whole building is insulated with contact thermal insulation ETICS.
|
|
|
Apartment building, Brandýs nad Labem-Stará Boleslav
Králík, Martin ; Osička, Jan (referee) ; Sukopová, Dáša (advisor)
The subject of the bachelor thesis is the documentation for the construction of a residential building in Brandýs nad Labem - Stará Boleslav. The apartment building will be located in a quiet zone of a two-storey building in a future residential development. Residential building is detached. It will be based on flat terrain. The apartment building is L-shaped (it consists of two rectangles). The building has 5 floors and 1 underground floor. There are a total of 19 apartments in the building, technical facilities and storage facilities are located in the underground part of the building. Residential building is basement. The building is covered with a flat vegetation roof. The peripheral above-ground structure is made of therm-shaped blocks, insulated with ETICS contact thermal insulation system. The main entrance to the building is from the northeast side of the building.
|
guest ::
