|
| |
|
|
The Reconstruction of a Stell Structure two-storey Building.
Rapant, Jaromír ; Pilgr, Milan (referee) ; Buchta, Stanislav (advisor)
his thesis deals with exploration of paper mill building, structural load, and assessment of current load bearing structure and proposing reconstruction. Bearing structure is entirely made out of steel and it’s done as XYZ frame. The building is located in Olsany u Sumperka, this defines the climate. The paper mill is of a platform of 54,0 x 48,25 m. It’s a two floor building with average height of 13,22m. Thesis contains foto documentation of the building and tests of strength of the steel in the bearing structure. Small statistical calculation was done, of all current elements of the steel structure. And necessary reconstruction was based on these calculations.
|
|
| |
|
| |
|
|
The indoor environment of Kindergartens in terms of Building physics requirements
Jechová, Marie ; Krupica, Roman (referee) ; Bantová, Sylva (advisor)
The thesis titled "The indoor Environment of Kindergartens in Terms of Building Physics Requirements" addresses the challenges associated with ensuring thermal comfort in the indoor environment, while simultaneously providing adequate lighting and daylighting for the classrooms of kindergartens. The thesis is structured into interconnected and complementary sections. The first section dissects the identified problem, establishes legislative requirements, outlines research methods, and defines the objectives, which will be assessed in the conclusion. This section also includes the definition of the kindergarten object in accordance with current legislation. Furthermore, the issues of lighting and daylighting are explained from the perspective of applicable laws, regulations, and standards, incorporating all necessary variables, graphs, formulas, calculations, and definitions. Similarly, subsequent chapters will elaborate on the thermal comfort of the indoor environment. The final section of the theory provides an overview of simulation and computational software tools, employed to model different scenarios, compare the current and proposed conditions, and draw conclusions for the thesis. The practical section follows, focusing on the design of window openings, shading methods, and ventilation regimes to meet the requirements for daily lighting and daylighting while adhering to the maximum indoor air temperature in line with normative requirements. Experimental measurements of essential input data for assessing the thermal stability of the indoor environment were conducted during summer months in the existing facility. In the concluding part of the thesis, conclusions will be drawn regarding the ratio of floor area of transparent parts of building envelopes to the floor area of the classrooms. This is done to ensure compliance with legislative requirements concerning both thermal and lighting comfort in the indoor environment. The conclusion also summarizes potential measures to achieve the desired parameters and outlines a prospective solution to the addressed issues.
|
|
| |
|
|
Heating motherly school with heat pump and solar collectors with additional heating to the open air pool
Preclík, Vítězslav ; Krhovský, Bohumil (referee) ; Mastný, Petr (advisor)
In 2007, in June the company Europrojekt entered the project with the requirement of the formulation and implementation of heating motherly school by heat pumps in the village Hluk. The projekt was ordered by the management of this motherly school. This is a total reconstruction of the heating system building motherly school, including the use of residual heat for heating the pool water in an open swimming pool, which is located near this motherly school. The requirement is also given to reduce environmental pollution and achieve energy savings. This diploma thesis solves the detailed description of solutions and calculations for each part. In first, the introductory part of the work is focused on getting the project, a description of the object motherly school and a proposal for the energy measure before the realization. Second section is devoted to the selection and design of the system of heat pumps and solar collectors. Next part of work is the use of the residual heat for heating the pool water in the transitional months, i.e. May, September and the main months June, July, and August, when should be the visit of the swimming pool the biggest. In addition, resolving heat recovery through plate exchangers, the calculation of storage tanks, valves insurance proposal, the expansion tank, circulation pumps, etc. The last part thesis addresses the energy and economic assessment of the whole project.
|
|
|
Návrh obnovy roubené stavby
Beníček, Tomáš
This diploma thesis is focused on the survey of the current state of the object and on proposal of possible restoration and protection of timbered buildings in the village Zděchov. The result is the creation of the proposed renewal, possible variants and extent of the interventions to structures. In the building construction was carried out technical survey, the evaluation will be used to draft measures and reconstruction. These results are processed for each component of the object. Evaluation in terms of heat-insulation properties of existing structures and a proposal of possible insulation with respect to the condensation of water vapor was done in program Teplo 2014. Subsequently, different variants of measure are suggested and the budgets are developed for individual variations.
|
|
|
Design of erosion control and flood protection measures in the plan of joint facilities in the cadastral area of Tučapy near Vyškov
Pavliš, Jaroslav ; Larišová, Lucie (referee) ; Dumbrovský, Miroslav (advisor)
The subject of this diploma thesis was to develop an analytical proposal for erosion control and flood protection measures in the plan of common facilities in the Tučapy district near Vyškov. Erosion protection was analyzed for EEA areas based on 4 variants including the current state without or with measures and climate change without or with measures. Agrotechnical and organizational measures, which includes contour cultivation with crop residues, or only crop residues, was considered as an soil erosion control application. The design and dimensions of stabilized paths of concentrated runoff also fell under the 4 variants of soil erosion protection measures. During the analysis, 4 critical profiles were identified, for which critical runoff were calculated for different Qn. This analysis of critical profiles also fell under the already mentioned 4 variants. This work was also supplemented by a direct design of flood protection with technical and organizational aspects, which were drainage ditches and strip crop rotation. The design of the jamming joints was based on 2 variants including the existing condition without conservation or with a coservation measures. The ArcGIS program was used to calculate erosion results and present analytical maps. The DesQ program was used to obtain the necessary volumes, flow rates and their graphs. Dimensioning of stabilized valleys and drainage basins was carried out using the Dimenzov program. The results of this work are intended to show the effectiveness and positive effects of anti-erosion and anti-flood measures.
|
|
|
Adaptation of a vicarage building
Hrubá Šintálová, Klára ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The diploma thesis deals with the preparation of the proposal of the parish building remodelling in the village Provodov. The building itself will consist of the multipurpose hall, accommodation, and public bathroom. The objective was the preparation of the project documentation for the implementation of the construction. The existing building is of rectangle ground plan with the hip roof and in the scope of the remodelling there is proposed an expansion of the building with two extensions. One extension is in the north-east part of the building, more specifically in the whole width of the original side of the building. The extension will be dilated in all the constructions of the existing building. The above-mentioned building is single-storey, and it consists of reinforced concrete skeleton supporting system. The second extension appears in the south-east and north-west sides of the building. This extension expands the space of the attic which will form the second floor of the building. The brick supporting system has been used and it consists of the ceramic construction blocks Therm. Both extensions are roofed with the shed roof of the low slope with the steel plates roofing. The whole building is insulated with the compact multilayer insulation solution ETICS. The double-skinned facade with the surface wooden board facing has been applied in the extension areas.
|
guest ::
