|
|
Family house with an establishment
Niedoba, Andrzej ; Bartoš, Tomáš (referee) ; Utíkalová, Ivana (advisor)
This project designs a new building of family house with an establishment as a separate object. Family house is single-storey with residential attic, without a basement and with a gable roof. The establishment (hairdresser) has a shed roof. The building is designed as a wall construction system (Porotherm) with a contact thermal – insulation system. There is a garage located among theese objects. The project will also include the parking lots and pavements.
|
|
|
Multifunctional house Lignum
Jakubčánin, Marek ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The diploma thesis focuses on a mixed-use building with a rectangle-shaped ground plan in Žilina city. The object is four-storey and with no basement. It is split into two sections. The first one provides a space for three operations in northeastern part of the first floor with an attached parking lot. These operations are not further described in this project and depending on investor´s requirements some changes may apply. The second part is an apartment housing section. The first floor contains utility rooms such as storage and buggy room. The housing sections are accessible with two entrances. The apartments are located from the second up to the fourth storey and are designed 1+KK, 2+KK,3+KK and 4+KK respectively. The apartments are assigned with parking spaces isolated from operations parking lot. Vertical bearing walls are made of clay blocks POROTHERM 30 AKU P+D, which are used also as internal bearing party. Internal bearing walls placed in apartments are made POROTHERM 25 AKU P+D and completed by POROTHERM 14 PROFI P+D. Walls will be placed on conrete and reinforced concrete strip foundation. Building has external thermal insulation made by EPS gray 200mm thick. Horizontal load-bearing structures are made by reinforced concrete. Object has flat roof with minimum slope 3%. Damp proof is made by PVC-P membrane. As thermal insulation is used mineral wool.
|
|
|
Multifinctional gym hall
Holemy, Ondřej ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
The master‘s thesis concerns about the freestanding multipurpose sport hall with a base for sportsmen and spectators and its associated sport and regeneration centre. The object is situated in a city district Brno Bohunice. The designed building is divided into a single storey multipurpose sport hall and an outbuilding with two above-ground floors and a partial third floor above the entrance part of the building. Object’s plan shape forms a rectangle with recessed entrance part. The load-bearing structure consists of a combined column and wall construction system. The main multipurpose hall is roofed with arched glulam laminated trusses, which are supported by steel columns covered by sandwich panels. The outbuilding’s vertical load-bearing structure is formed by clay blocks. The horizontal load-bearing structure is formed by prestressed concrete floor slab. The building is based on shallow foundations. The object is designed to be barrier-free for sportsmen and visitors as well.
|
|
|
Sports centre
Nováček, Petr ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
The theme of master’s thesis is the newly built sports center in Rosice. This work aids to develop design documents for building construction. The building is partial basement, four-storey. The building is designed of systém Heluz with cast-in-place reinforced concrete floors. The roof construction is single-flat, over part of the building is composed of timber truss Gang-nail. In the building there is the bar with bowling alley, squash, small multipurpose sports hall, fitness room, table tennis and spinning. In the basement are designed three saunas. Tennis courts with playground are outside next to the building.
|
|
|
Apartment building on a sloped site
Bednář, Jiří ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
The aim of my master's thesis is a project of a new apartment building on a sloped site at a level of the documentation for the structure realization. The building is partly basement with four above-ground floor. Individual floors up recede and are roofed with flat roofs. The structural system of the basement part is made up of permanent shuttering and the above-ground part is made up wall of cross laminated timber construction panels KLH. The project of the building is in accordance with the development plan of Kopřivnice and with the current street built. The work puts great emphasis on layout including security of the construction in terms of statics, architecture, energy savings and safety at utilizing the structure.
|
|
|
House on a Sloping Building Site
Pánková, Aneta ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The subject of my bachelor´s thesis is to design a house on a sloping building site at a level of project documentation for the buidilng realization. The building object is located in the village of Velke Porici and designed for a family of four. The building has a basement with a one above-ground floor with a wall construction system of brick blocks. Foundation of the house is done on the strip foundations and the house is covered with a flat roof. Entry to the house is solved trough the above-ground floor where there is a rest area. In the basement spaces is a daily part of the house. The building project is completed in accordance with layout, architecture and structural design and safety in use.
|
|
|
Detached house, Sovinec
Pavela, Martin ; Žižka, Lukáš (referee) ; Bečkovský, David (advisor)
The aim of my bachelor´s thesis is design of dispositions and structural solution for family house in (municipality) Sovinec at the level of documentation for construction. The object is located on the northern slope. It is two-story detached building with basement. (Layout of basement garage exceeds from the first floor plan and because of this maximally exploit the possibilities of the building parcel). Structural system of the basement consist of stay-in-place formwork. The first and second floor is made of wooden frame construction. The basement is covered with intensive green roof. This roof is supported by prefabriceted reinforced concrete Spiroll panels. The rest of house has pitched roof and loadbearing part of this roof is in form of modern sliding collar. The object architecturally fits into the surrounding landscape and it is designed according to the plan of the municipality Jiříkov.
|
|
|
Residential Building - Lesná
Michna, Adam ; Drobníček, Ladislav (referee) ; Menšíková, Naděžda (advisor) ; Matějka, Libor (advisor)
Bachelors thesis „Residential building Brno – Lesná“ is processed in form of project documentation. This thesis investigates the apartment building with four apartments and an underground garage with stacking parking system. The plot is situated near housing estate Lesná, close with Diviš district, which is made up of small family houses. On the plot are situated five dimensionally similar houses, this work deals with one of them in detail. This is a building with two underground floors, two floors above and a residential attic. The underground part in which there is a parking space, use of reinforced concrete structure, above-ground part is made up of a brick wall system. The house is covered with wooden gable roof truss purlin system. The house has two two-room apartments and two maisonettes three-room apartments.
|
|
|
Family House with Workroom
Ćmielová, Iwona ; Potužník, Michal (referee) ; Mátl, Miroslav (advisor)
The subject of this bachelor’s thesis is the new building of family house with workroom (hairdresser’s) in Návsí. The family house is located on flat land on the outskirts of the village. The building does not have a basement and has two above – ground floors. In the first floor there is a workroom and entrance to the living area. The house is designed for a family of four. The building is made of wall construction system Porotherm, the roof of the house and the workroom is gabled. The project will also include the parking lots and pavements.
|
|
|
Family House with workroom
Lipusová, Noemi ; Potužník, Michal (referee) ; Mátl, Miroslav (advisor)
The subject of this bachelor´s thesis is processing of building – technical part of project documentation for realization of new building of family house with workroom in town Třinec. Family house has two above-ground floors a two shed roofs. House is designed for a family of four. The establishment (hairdresser‘s) has a shed roof. The building is designed as a wall construction system (Porotherm). The project will also include the parking lots and pavements.
|
guest ::
