|
|
The design of screw pump
Hyriak, Maroš ; Klas, Roman (referee) ; Haluza, Miloslav (advisor)
This thesis is concerned with the topic of Pumps with crew centrifugal impeller. Thanks to the benefits such as free passage and efficiency there are many practical applications of these products. Despite this fact there is only few manufacturers dealing with them what results in lack of research and available information in the area. In order to fill the gap, this thesis aims to propose hydraulic of screw centrifugal impeller to the specified parameters. The impeller with a single moving blade will be designed for pumping heavily polluted water and hardly pumpable liquids. Blade will be balanced together with the rotor, while the emphasis will be placed on the highest free passage of impeller. The theoretical part of the thesis summarizes literature on the subject, practical part deals with the calculations and adjustments pointing to a concrete proposal. Parameters of designed hydraulics were verified using stationary calculations using MRF model in FLUENT. As a results, two possible solutions are offered.
|
|
| |
|
|
Development and control of ventilating turbines
Ondra, Martin ; Malach, František (referee) ; Malášek, Jiří (advisor)
This master´s thesis will discuss the mechanical regulation of suction of ventilation turbines. There were designed and described three methods of mechanical regulation in this work. It is a regulation by half-valve, quarter-valve and so-called whirling turbine. Then the calculation of the auxiliary fan was included. The resulting mechanical regulation of this work permit, with high winds, restricting the flow of exhaust air without using electricity. Thanks to this there are saving overall cost of running ventilation turbines and reducing heat loss of industrial and commercial buildings.
|
|
|
Continual helicoidal mixer
Pelka, Tomáš ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma project works out and is focused on the continual mixing process of the particular matters. The project is divided into following chapters. Chapter 1 includes mixing theory and information of the experimental work of the particular matters for blade using. In chapter 2 there is Evaluation and calculation of the technical parameters for the mixer. Chapter 3 deals with the engine proposal and chapter 4 includes calculation and design work of the gear transmission. Chapter 5 includes the stress analysis of the shaft and blade with the I-deas software. In attachment there are also the mixer arrangement drawing and detailed drawings of the key parts and groups for the mixer.
|
|
|
Sensitivity analysis of flow through the vanes of the VNT mechanism
Čech, Martin ; Mrázek, Radim (referee) ; Vančura, Jan (advisor)
This diploma thesis analyzes the effects of various parameters of vane profile and position of VNT mechanism on the size of aerodynamic force which acts on the vanes and on the position of neutral axis of the vane. A CDF simulation was created to do this analysis, and the results of the simulation were evaluated. Thesis also deals with turbochargers in general and with other methods of their regulation.
|
|
|
Installations in the draft tube of the swirl turbine
Kilian, Ondřej ; Rudolf, Pavel (referee) ; Haluza, Miloslav (advisor)
Diploma thesis deals with design and exploration of installation in the draft tube of the swirl turbine. Use of the draft tube is defined in the first part, with illustration of energetical gain and efficiency of draft tube. Further the suitable shape of draft tube is studied by CFD computing. Design, research and evaluation of installation in the draft tube are solved in the main part.
|
|
| |
|
|
Turbocharger Regulating VNT Mechanism Load Simulation
Cetkovský, Martin ; Svída, David (referee) ; Vančura, Jan (advisor)
This diploma thesis deals with turbochargers with a focus on the ways of their regulation. The main subject is to design CFD simulation for a turbocharger with VNT mechanism at specific positions. Simulation is based on the turbocharger Garrett by Honeywell, for which measurement was realized. Finally torques acting on the vanes are evaluated from the simulation. The means of results improvement are considered at the end of the thesis.
|
|
| |
|
|
Ventilation calculations in synchronous machine
Judas, Jan ; Deeb, Ramia (referee) ; Janda, Marcel (advisor)
The aim of the project was to get familiar with the environment of ANSYS CFX, create several models of fans and synchronous machine model in Autodesk inventor, create model of cooling medium flow through the machine with these fans and evaluation of results. Firstly the thesis describes the synchronous machine itself, losses of the machine, the flow of power of synchronous machine and methods of its cooling. Next the thesis describes each kind of heat transfer, laminar and turbulent flow. The thesis also refers of kind of the fans and the program used to calculate the flow Ansys CFX, including the method that Ansys used to calculate. The work describes the individual modification of fans and setting of calculation in ANSYS. Then displays the results of the analysis these fans for different numbers of fan blades and for modification of the fan. Then the thesis analyzes selected modifications due to changing speed. In the last chapter shows the analysis of flow in the machine with three different fans. In particular, there is shown the mass flow rate, pressure and its distribution on areas for evaluation.
|
guest ::
