|
Specifications of the Ansys Fluent Solution Solver for low pressures in EREM
Šimík, Marcel ; Bílek, Michal (referee) ; Maxa, Jiří (advisor)
This thesis is focused on electron microscopy which issue is discussed at the beginning of work. The main attention is dedicated to the Environmental electron microscope, especially the differentially pumped chamber, which the thesis deals with. There is a production of an experimental chamber for analysis of shock waves on going therefore main goal of this thesis was to analyze the flow pattern in this chamber. Using the Ansys Fluent program, simulations of the characteristic flow that arises from the pumping of the vacuum chambers namely the ultrasonic flow at low pressures on which the most suitable turbulent module was applied as well as the degree of discretization was performed. The final analysis of this flow pattern is primarily focused on the localization of the shock wave which experimental evidence is to be lodged by shadow optical method as a part of the new concept of the chamber. The basis for the simulation of the chamber was taken over by Dr. Danilatos, with which the results were compared.
|
|
Measurement uncertainties determined by the Monte Carlo method
Krejčí, Roman ; Havlíková, Marie (referee) ; Šedivá, Soňa (advisor)
This bachelor thesis deals with the determination of the uncertainties of direct and indirect measurements. It focused on the uncertainty calculation by Monte Carlo method and GUM uncertainty framework. The practical part deals with the determination of uncertainties indirect measurement of resistance Ohm’s method. The calculated uncertainties are compared on the basis of the influence of the method, accuracy used devices and the temperature.
|
|
Uncertainty of Indirect Measurement Determined by Monte Carlo Method
Novotný, Marek ; Havlíková, Marie (referee) ; Šedivá, Soňa (advisor)
This bachelor's thesis deals with determination of uncertainty in measurement, primarily with regard to the indirect measurement. There is theoretically analyzed and practically implemented calculate the uncertainty coefficient ent - speed multiple hole probe Annubar 485 in two ways. The first way is to calculate the uncertainty of the classical met-hod and the second one is the uncertainty using the Monte Carlo.
|
|
Uncertainty Calculation by the Monte Carlo Method
Kósa, Valentin ; Šedivá, Soňa (referee) ; Havlíková, Marie (advisor)
This bachelor’s diploma thesis deals with the measurement inaccuracies. Various types of uncertainty, methods, their specifications and ways of their recording are described. Next, Monte Carlo method and its application are introduced to the reader. Next, both methods described are applied: calculation of accuracy using uncertainty – GUM method and calculation of accuracy using Monte Carlo method. The methods are applied in measurements of DC current at resistive load with different meters.
|
|
Depletion calculation of VVER 1000 reactor fuel using KENO code
Janošek, Radek ; Katovský, Karel (referee) ; Novotný, Filip (advisor)
The introduction to operational nuclear reactors focusing on light-water pressurized reactor VVER 1000 is in the beginning of this Master´s thesis. This thesis covers basic technology of VVER 1000 reactor with focus on reactor core and nuclear fuel TVSA-T. A significant part of the thesis deal with basic concepts of nuclear safety and its methods. The main goal is to create a model of VVER 1000 reactor, which can be used in nuclear burn-up calculations using KENO code. Therefore a part of this thesis deals with explanation of statistical Monte Carlo method and the KENO code.
|
|
Uncertainty Analysis of Hydrological and Operating Parameters on Water Management Analysis of Reservoir Storage Capacity
Paseka, Stanislav ; Menšík, Pavel (referee) ; Marton, Daniel (advisor)
The aim of the thesis is to introduce the concept of Monte Carlo method for incorporating the uncertainties into the all hydrological and operational data inputs, which are needed to design and operation of large open water reservoir. Incorporating uncertainties into data inputs during calculation of reservoir storage capacity, then the consequent active conservation storage capacity is loaded by uncertainties. In the same way the values of outflow water from reservoir and hydrological reliability are affected by these uncertainties as well. For these kind of calculations the reservoir simulation model has been used, which simulate behavior operation of reservoir and is able to evaluate the results of simulations and help to reduction risk of storage capacity failure, respectively reduction of water shortages during reservoirs operation during low water and dry periods.
|
|
Approximations in Stochastic Optimization and Their Applications
Mrázková, Eva ; Horová, Ivana (referee) ; Štěpánek, Petr (referee) ; Karpíšek, Zdeněk (advisor)
Mnoho inženýrských úloh vede na optimalizační modely s~omezeními ve tvaru obyčejných (ODR) nebo parciálních (PDR) diferenciálních rovnic, přičemž jsou v praxi často některé parametry neurčité. V práci jsou uvažovány tři inženýrské problémy týkající se optimalizace vibrací a optimálního návrhu rozměrů nosníku. Neurčitost je v nich zahrnuta ve formě náhodného zatížení nebo náhodného Youngova modulu. Je zde ukázáno, že dvoustupňové stochastické programování nabízí slibný přístup k řešení úloh daného typu. Odpovídající matematické modely, zahrnující ODR nebo PDR omezení, neurčité parametry a více kritérií, vedou na (vícekriteriální) stochastické nelineární optimalizační modely. Dále je dokázáno, pro jaký typ úloh je nutné použít stochastické programování (EO reformulace), a kdy naopak stačí řešit jednodušší deterministickou úlohu (EV reformulace), což má v praxi význam z hlediska výpočetní náročnosti. Jsou navržena výpočetní schémata zahrnující diskretizační metody pro náhodné proměnné a ODR nebo PDR omezení. Matematické modely odvozené pomocí těchto aproximací jsou implementovány a řešeny v softwaru GAMS. Kvalita řešení je určena na základě intervalových odhadů "optimality gapu" spočtených pomocí metody Monte Carlo. Parametrická analýza vícekriteriálního modelu vede na výpočet "efficient frontier". Jsou studovány možnosti aproximace modelu zahrnujícího pravděpodobnostní členy související se spolehlivostí pomocí smíšeného celočíselného nelineárního programování a reformulace pomocí penalizační funkce. Dále je vzhledem k budoucím možnostem paralelních výpočtů rozsáhlých inženýrských úloh implementován a testován PHA algoritmus. Výsledky ukazují, že lze tento algoritmus použít, i když nejsou splněny matematické podmínky zaručující konvergenci. Na závěr je pro deterministickou verzi jedné z úloh porovnána metoda konečných diferencí s metodou konečných prvků za použití softwarů GAMS a ANSYS se zcela srovnatelnými výsledky.
|
|
Business Plan
Slouka, Petr ; Němeček, Petr (referee) ; Kocmanová, Alena (advisor)
This master’s thesis contains the basis for the business plan of the project – real property sales. An evaluation of the strong and weak points of the project along with the elaboration of a financial and time analysis result from the thesis. Furthermore, the thesis offers a proposal for the most convenient way to continue in this business intention. A particular stress was placed on the cost estimate using the Monte Carlo method.
|
|
Optimization Methods for Compensation of Shooting Inaccuracy
Horníček, Jan ; Novotný, Jan (referee) ; Popela, Pavel (advisor)
In this work there is performed analysis of inaccuracy shooting and its optimum corrections especially for playing darts. At rst the model describing inaccurate shooting is made. Using this model we received prerequisites for numerical solving of our problem. Computing algorithm was made and than was proven that our problem can be solved with arbitrary precision by this algorithm. The algorithm was implemented in MATLAB and modied using functional Analysis to minimize computing time. Our problem was solved by this algorithm and in conclusion was made simple application for visualization of received data.
|
|
Uncertainty of Measurement Estimation of Mean Monthly Flows Values of the Selected Hydrometric Station at the Svitava River Catchment Area
Paseka, Stanislav ; Janál,, Petr (referee) ; Marton, Daniel (advisor)
Currently, a sizes of the time series elements of average monthly flows uncertainty are not taken into account in more detail and it does not know the estimation of their sizes. The above mentioned fact could ultimately affected the design and operation of large open water reservoirs. This bachelor's thesis deals with the uncertainty of measurement estimation of the mean monthly flows which have derived in the measuring profile Prostřední Poříčí in the Křetínka river in the Svitava river basin. Evaluation is done using a measured values of water level stages and a stage-discharge relation curve. The basis for design of uncertainty affected stage-discharge curves and water lavel stages the Monte Carl method is used. The outcome values of random flows are further evaluated using the statistical methods in the form of the statistical characteristics and presented as uncertainties of mean monthly flows.
|