|
Kindergarten
Lekeš, David ; Donaťák, Vladislav (referee) ; Donaťáková, Dagmar (advisor)
The main aim of this thesis is to create a Project documentation of the design of the New development, kindergarten, in the cadastral area Dejvice, Prague. The object is designed as a standalone barrier-free single-storey building. Kindergarten consists of two departments with a capacity of 48 pupils and adjacent facilities. The object is based on foundation pads and ground table. All masonry constructions are lime-sand blocks Kalksandstein. The facade is complemented by thermal isolation and the exterior staircase is monolithic and reinforced concrete. The object has a flat roof where an air conditioning unit is placed. The drawing is processed via AutoCAD software and visuals are created in program Sketchup.
|
|
Dynamic analysis of railway bridge
Mojrová, Martina ; Vlk, Zbyněk (referee) ; Nevařil, Aleš (advisor)
The content of work is to determine modal characteristics of bridge construction over the Dyje river near Břeclav. That is done in ANSYS software and AxisVM software. These characteristics are compared with results from dynamic loading test and they are compared between themselves. In thesis is also an assessment of response to static traffic loads because of decision about dynamic analysis necessity. Then there is a simulation of dynamic traffic loads and results of this simulation are compared with results of dynamic analysis which was done by the project. The aim is to do a few static and dynamic tasks and compare results with the real dynamic test and with calculated results and to determinate the effect on certain variables.
|
|
Multifunctional buiding Dělnická
Horňáková, Veronika ; Velecký, Pavel (referee) ; Utíkalová, Ivana (advisor)
The subject of diploma thesis is processing of the desing documentation for new multifunctional building in the street Dělnická, cadastre unit Komín, Brno - Komin. The building is a 3 floors and one underground floor and is designed as a last building in the street on the nearly flat land. In the building is located non-residential space, dwelling units and studios. Non-residential space comprise seven parking spaces in a public underground garage, two stores barrier-free solution with the facilities and two studios 1 + 1. The residential part has two dwelling units 1 + kk, two dwelling units 2 +1 and two dwelling units 4 + kk. The building is based on a waterproof concrete structure "white tub". The vertical structure is built of clay blocks Porotherm, horizontal structures are cast-in-place reinforced concrete. The exterior building envelope is completed with thermal insulation. An internal staircase is cast-in-place reinforced concrete. The entrance to the garage for cars is possible by Autolift. The building is roofed with warm flat roof. The drawings are processed in AutoCAD software visualization are processed in Sketch Up
|
|
Mixed-use building in Brno
Koždoň, Jakub ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The subject of this diploma thesis is a newly built mixed-use building in Brno. It is a four-storey building without cellar. The building is located on a corner plot in an urban part of Brno - Židenice. In the 1st floor there are three business units. On the other floors are a total of 11 apartments. One apartment is located in the courtyard. It is designed for people with limited mobility. The vertical structures are of the ceramic blocks Porotherm. Ceiling structures and staircases are cast-in-place reinforced concrete. The building is insulated with contact insulation system ETICS. The roof is warm flat. The project was processed by computer software AutoCAD 15.
|
|
Polyfunctional building
Michna, Patrik ; Pospíšil, Jaroslav (referee) ; Fuciman, Ondřej (advisor)
The assignment of my diploma thesis was to design a polyfunctional building. Function of the building is based on the requirements of the Land Use Plan Brno, cadastral zone Židenice. The aim of the design was to improve the quality of public space in the area by creating parks, urban parterre with services, parking and by bringing missing features to the area. The building is located in the centre of the plot. The main facade is oriented to the main street. Design creates new parking on the ground and in the underground garage. On the first floor are rentable spaces for commerce and services. At 2nd and 3rd floor are open space offices with the possibility of spatial variability solutions. Architectural expression of the building is simple, consisting as a compact mass with parterre subsided, useful in terms of energetical sustainability. The facade of the building is made as a combination of a transparent double skin facade and opaque ventilated facade with fibre cement panels. Structural system is a precast concrete frame with a cast-in-place reinforced concrete shear core. Foundation is made as a reinforced concrete pads and strips. Ceiling is made of a precast prestressed hollow core slabs.
|
|
Observation Tower
Gábor, Lukáš ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
The contents of this graduation thesis is design and assessment of the load-bearing structure of the observation tower situated between the village of Horni Lhota and Provodov. The construction was designed as a steel structure in two variants. Type A is cuboid shape with a side lenght ground plan 6,8 m and height of 37,7 m. Type B is an hourglass shape with a height of 39 m. Ground plan is a regular octagon shape with variable diameter. Detailed static calculation and drawing documentation was processed only for option B.
|
|
Tiered house
Dostál, Lukáš ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
Project of a tiered apartment building. It is a four-storey above ground object.On the ground floor there are garages, storages and technical equipment of the building. The second to fourth storey are designated for dwelling, there are twelve housing units 1+1, three-bedroom flats with kitchenette and four-bedroom flats witch kitchenette. Some of the flats have cascade terraces. The load-bearing structure is made of cast-in-place concrete frame filled with concrete and clay masonry. The frame is founded on two-phased reinforced foundation blocks. The building is roofed with a main flat roof and walkable flat terraces adjacent to the flats. The building is thermally insulated with contact thermal insulation system.
|
|
Multifunctional Building
Kozelková, Klára ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The subject of this thesis is to design a multifunctional building. The proposed structure consists of two separated buildings by an expansion joint. The first building has floor ground floor and includes a residential part with seventeen dwelling units and three commercial spaces. The second building contains two ground floors and includes café. The residential part is covered with flat roof without operating. The building with café is covered by green roof. The multifunctional building has been designed with two separate parking areas with corresponding number of parking places.
|
|
Center of water skiing Soběslav
Veselý, Tomáš ; Klubalová, Pavlína (referee) ; Brzoň, Roman (advisor)
The thesis is focused of proposal and procesing of project documentation Center for waterskiing. The proposed object is located in the western part of the town Soběslav, in the locality aimed at sports activities. The building is created of facilities for summer sports, especially water skiing and wakeboarding. Further there will be built a playground for ball sports and track on roller skates. This is a three-storey no with a cellar object with a flat roof. The object is based on the foundation reinforced concrete pads a strips. The first floor is bricked of permanent formwork and partly of cast in place structure. The second and third floors is designed of clay blocks POROTHERM. This masonry is insulated with the aid of external contact thermal insulation. In the western part of the building is designed ventilated facade. The floor structures is designed from prestressed reinforced concrete panel SPIROLL and partly from reinforced concrete slabs. The object is divided into several operating units. They are the gym and its facilities, restaurant with kitchen, facilities for employees and the necessary storerooms, coffeehouse, shop with sporting equipment, rental equipment for water skiing and a dressing room serving the outdoor sports. The essential part of the second floor is comprised outdoor terrace. From this terrace is allowed entry to the coffeehouse, restaurants, shops and on the main staircase.
|
|
Events and Places Agregation and Suggestions from Facebook
Dubeň, Matej ; Plchot, Oldřich (referee) ; Szőke, Igor (advisor)
The aim of this bachelor thesis is to explain the design and implementation of an Android application "Let's Go Out", which can recommend Facebook events and places to the user. The recommendation is carried out by using the hybrid recommending system approach that links together the collaborative filtering and a content-based recommendation approach, tracks the user's interaction with the application and, based on recorded data, adapts to the recommendation process. This thesis also describes the testing process that compares the recommender systems of competitive applications and points out achievements.
|
guest ::
