|
|
Completion of chateau Návojná – Multi - functional building, implementation of finishing processes
Vaněk, Josef ; Rychtecký, Martin (referee) ; Kovářová, Barbora (advisor)
The content of the thesis is the solution the technological stages of finishing works new multifunctional building in the village Návojná. The work focuses on the implementation of floor construction and contact thermal insulation system. The work includes a technical report, technological situation, the organization of the construction, plan work safety and time schedule. Further technological regulations of selected construction processes, inspection and test plan, inventory of machines, bill of quantities and selected details of construction solutions.
|
|
|
Administrative building Brno Hlinky, implementation of facade and roof cladding
Dušková, Lucie ; Liška, Pavel (referee) ; Kovářová, Barbora (advisor)
The subject of this Bachelor thesis is offering solution of technological steps roofing and cladding of an office building in Brno, Hlinky. It is a two storey building, partial basement, the overall module dimensions 9.4 x 37.5 m. Main supporting skeleton consists of roof trusses and ceiling beams that are attached to poles. The roof is purlin, load-bearing layer is trapezoidal sheet, which is on the top flange purlins. The walls are self-supporting, walled. Roof cladding is insulated with layer of polystyrene, the main waterproofing layer is mPVC film. Most of the cladding is designed as external thermal insulation composite systems with ceramic tiles, part of the facade on the west side of the building is made up of wood paneling with an air gap.
|
|
|
Land office Svitavy - solution of building envelope
Peterka, Dominik ; Selník, Petr (referee) ; Novotný, Michal (advisor)
This bachelor thesis is engaged in technological phase insulation of the building envelope Land Office in Svitavy. Specifically, the sheathing contact system. The work includes technical report, technological instruction, organization of construction, design of mechanical assembly, inspection and test plan, health and safety at work, budget, thermal and report scheduling.
|
|
|
Family house Bratčice
Pulgretová, Kateřina ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
The aim of the project is a new building of a family house in the cadastral area Bratčice, South Moravian Region. The house is in the row of existing development. It is designed for a family of four. The building has no basement and two floors. On the first floor there is an entrance, garage and main day area. On the second floor there is a bedrooms, work room and utility room. The building is designed mainly in wall system of Porotherm. There is a shed roof with a dormer and flat roof. The facade is designed as an external thermal insulation composite system or as a ventilated facade.
|
|
|
Residential Building
Voráč, Roman ; Sedmidubský, Jaroslav (referee) ; Sukopová, Dáša (advisor)
The apartment house is designed as a full-basement structure, with one underground storey and two above-ground storeys. The access to the building is either by a steel staircase or barrier-free, by a steel ramp. Cars enter the basement by a one-way ramp. The main entrance to the building is located on the first above-ground storey and is connected to the stairwell which serves as the principal vertical communication. The basement floor houses a parking lot, supporting facilities, cellars, and a boiler room. The first floor houses offices, including supporting facilities, and two apartment units, one comprising two rooms with kitchenette, the other a 3+1 (two-bedroom) unit. In addition, there is also a pram room. There are two 3+1 (two-bedroom) units on the second floor. Each apartment has its own balcony. The facade of the building is segmented, serving as a contact thermal insulation system. The building has a saddle roof, covered with gray-coloured seamed metal sheet roofing. Its slope is 13°. The building lies on ribbon foundations and a bearing plate. The structural system is based on brickwork consisting of ceramic building blocks, supplemented by reinforced concrete on the basement floor, and makes use of an outside contact thermal insulation system. The roof structures are represented by reinforced concrete monolithic ceilings. The load-bearing structure of the roof consists of a nailed roof truss girder, with the bottom flange of the girder carrying an SDK soffit – the ceiling structure of the second floor. The building will have a central heating system comprising an electric boiler with an accumulation tank located in the boiler room on the basement floor. Horizontal utility lines are bundled, with two main utility nodes located between apartment units.
|
|
|
New building of a family house in the township Jedovnice
Zouhar, Martin ; Hlavsa, Petr (referee) ; Kolář, Radim (advisor)
The solution of the bachelor's thesis is a new building of a family house in the township Jedovnice. This building is located in a particular territory which had precisely limited the possibilities of the construction. The family house has a partial basement, one aboveground floor and an attic. The building is designed of lime-sand bricks, it is thermally insulated by contact insulation system made of mineral cotton wool and is based on a strip foundation made of plain concrete. Ceilings are made of pretensioned concrete panels. The building has a saddle roof with ceramic roof tiles. The building is intended for a family of four to five members.
|
|
|
New building for habitation with tooth surgery in Červený Kostelec
Junková, Pavlína ; Horálek, Jiří (referee) ; Benešová, Romana (advisor)
In the bachelor´s thesis there is designed new building for habitation with tooth surgery. House is located in the town of Cerveny Kostelec, street Lánská on plot No 1007/14. The building has two floors, has not a basement and has flat roof. The building is designed by Heluz system, whole house is insulated with external thermal insulation composite system. In the first floor there is tooth surgery and living area. In the second floor there is only living area. The right side is connected to the building garage. The project itself is processed in ArchiCAD 14.
|
|
|
Family House
Vandrovec, Aleš ; Vacek, Michal (referee) ; Matějka, Libor (advisor)
Bachelor’s thesis theme is isolated family house project. The house is devided into two major parts. Floor projection looks like letter „T“. First part has measurements 7,0 x 25,0 m, It has two aboveground floor and one lower basement. The roof of this part is double-pitched (top of gable +8,500), roof covering is from Ethernit NATURA and facade has surface from Klinker belts, which are sticked on ETICS. Second part has no lower basement and one aboveground floor, their measurements are 9,9 x 10,2 m, it has flat roof (attic gable +3,700) and ventilation planch facade. Foundations of house are shallow. The construction systém is walled. The lower basement is built from masonry UNICA 20 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 240 mm. House stairs are prefabricated single-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house, mostly with floor heating. In living rooms wear layers are from oak parquet block and in toilets and bathrooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Tilets and bathrooms are tilled with ceramic tiles. All distributons of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile EURO IV 68and glazed by double glazing unit (Umax=1,2 W/m2.K).
|
|
|
Energy Consumption Reduction of Panel Buildings
Pozděnová, Barbora ; Vojtěch, Dušan (referee) ; Hanák, Tomáš (advisor)
The aim of the Thesis is to describe the current trends in reducing energy use of blocks of flats and to analyse the costs and profits of these projects using a certain example.The theoretical part describes the history of construction, the characteristic of the panel houses including some common faults, and the provided grants for their reconstruction. The practical part deals with the assessment of three existing panel houses, which were insulated in different time periods, with various strategies and under different financial conditions.
|
|
|
Detached house with surgery
Vitík, Jan ; Pařízek, Miloš (referee) ; Kacálek, Petr (advisor)
The project solves design of detached house with dentist surgery. The level of processing of architectural and engineering parts corresponding to the documentation for building realization with modifications according to the bachelor thesis.
|
guest ::
