|
Diagnostic and improvement of electrical contact
Hrdý, Branislav ; Kuchyňková, Hana (referee) ; Veselka, František (advisor)
The aim of bachelor thesis is create a summary overview of terminals, to obtain information about contruction, materials of the conductive parts of the terminals and its snap methods. The next goal was description of methods of conductors’ construction and snap methods of its con-ductors. All processed information is obtained from the technical literature and from practical knowledge acquired during the measurement and monitoring of analyzed terminals. The final goal was to create an animated 3D model of terminal as a sample of main process of terminals’ working principle. In conclusion of this work is comparison of terminals, and their properties, facts observed during measurement or testing.
|
| |
|
Timber foot bridge over a wolf run
Mynaříková, Alice ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
The subject of this diploma thesis is the construction of a timber foot bridge over the wolf run in the Šumava National Park. The total length of the bridge is 240 m with two ground plan bends. The foot bridge includes three viewing decks, two of which are covered with shed roofs. The foot bridge is divided into 16 segments. Each segment is 15 m long with a width of 2.2 meters. The ground plan dimensions of the viewing decks are approximately 15x7 and 15x11 m. As the main structural material has been chosen glued laminated timber of the strength class GL28h, other elements are made of solid timber of the strength class C24. The thesis includes an introductory document, options analysis, technical report, static analysis, bill of material and drawings.
|
|
Blender Tutorial
Tomšík, Filip ; Žák, Pavel (referee) ; Kubíček, Radek (advisor)
This thesis focuses on the increasingly popular shareware Blender which has growing application possibilities in various branches. The thesis aims at a general description of basic modelling techniques working with mesh objects as well as curves used for creating models and computer graphics. Part of the thesis is dedicated to a description of animation abilities of the programme, an outline of dierent methods and a more detailed description of correspondent modules. The central point of the thesis is to introduce the reader to the basic and advanced modelling techniques and their use in Blender, in the form of a tutorial.
|
|
Comparision of FEM models of joints
Hlaváč, Martin ; Hrůza, Václav (referee) ; Pokorný, Přemysl (advisor)
This thesis deals with the comparison of alternative models of the simplified joints used in the FEM models of complex models with detailed joint details. This is essentially a screw connection with dowel bolt and standard bolt, weld connection "T" and overlap weld connection. Individual connections are compared in the simulation results of matching models.
|
|
Replacement of headlamp parts screw fixation by a plastic nail
Lysa, Bohuslav ; Píška, Miroslav (referee) ; Polzer, Aleš (advisor)
The master thesis covers several issues linked to a substitution of headlamp screw fixation by a plastic nail. The thesis includes an analysis of the headlamp technology, including description of the prescribed durability tests. On the basis of the analysis some new designs of plastic nails are proposed, consistent with characteristics of plastic materials. Selected outcomes of the analysis have been tested as prototypes and verified with Finite Elements Method in SimDesigner including 3D modeling capabilities provided by the Catia V5. The feasibility study regarding a casting form of the new design of plastic nails and technical economic valuation for contingent assembly mounting is included in the thesis.
|
|
Footbridge
Grussmann, Jan ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
Master´s thesis deals with design and complex static assessment of timber roofed footbridge structural system. The calculation part is divided into three main chapters, that are dedicated to determine load impacts on structure, to particular structural and roof members assessment and also to design details of connections. The lower part of structure is formed by flat arched main beams of glued laminated timber, floor beams, stringers and under-deck bracing. The upper part of footbridge is formed by structure of gabled roof and additional bracings. Transversal frames of footbridge copy the shape of arch and they are arranged orthogonally to its axis. They form a radial fan with commom centre in the longitudinal direction. The static scheme of structure is thought as a statically undefinite system thanks to the bedrock surrounding the footbridge.
|
|
Roof structure of construction for social purposes
Bašista, Ján ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The work treats the static recalculation of an existing roof structure of a construction for social purposes and proposes two variants of the design of a new roof structure. The construction has a rectangular ground plan of 30 m x 47 m and the roof structure is placed on the load bearing circumference concrete walls. Except for the load constituted by the function of the construction and by the climatic area, an extra load of 2 tons suspended at any place of the structure is considered because of the special requirement of working and technological equipment. The variant no. 1 is designed from the steel S355. The variant no. 2 is designed as a combination of the wood GL24h and the aluminium EN-AW 5083. Both of the variants have 11 transverse load bearing girders. The purlins are perpendicular to the girders and are placed on them. Stiffness is secured by roof stiffeners.
|
|
Calculation of heat and force field UniGear ZS1
Mokrý, Lukáš ; ABB, Drahomír Tůma, (referee) ; Dohnal, Petr (advisor)
The aim of my work is to describe high-voltage switchgear type UniGear 500R, which is part of UniGear switchgears family. I will focus on heating issue of one 500R unit and its parts during operation. Maximum values of this heating is limited by standards and can´t be exceed to ensure safe and reliable operation. That is why the heating tests are necessary part of designing and developing switchgears. Calculation will be made by two different ways. First is classic one-pole heating net method and second is numerical simulation in Solidworks flow simulation program. Except the theoretical description there will be presented also used 3D model and explanation of both method, used to calculation and simulation. Last point of this work is measuring of this type of switchgear and getting real data. The main point there is to compare measured values with values calculated and decide if is possible to simulate tests with appropriate accuracy. Then would be also possible to substitute the real test in laboratory, which costs many thousand crowns and takes lots hours of time. This work is collaborated with EJF division of ABB Company, where I am employed. Heating issues in this company is always on process, because of developing and improving of their products. So this work could be helpful in this field. ABB provides all materials needed, especially technical catalogues, 3D model and final values from laboratory measuring. Support from college faculty is mainly in study consultations and proposing of calculations making. In the end of work will be make final comparison and evaluation of achieved results.
|
|
Design of the fixture for the clamping of the machined part
Pilař, Radek ; Kubík, Roman (referee) ; Strejček, Jan (advisor)
Bachelor’s thesis is focused on design for clamping of machined part on CNC machine EC-1600. Familiarization with issue, including a theory that is necessary for desing and manufactrure of the fixture. There are made design of options fixture, calculations of cutting forces, clamping forces, verification of safety and economic evaluation. The aim is to create the documentation that discusses all information regarding to a proposal fixture clamp of managment of the compandy OMNI-X CZ.
|