|
| |
|
|
Design of electrical installation of polyfunctional house
Sladký, Tomáš ; Pěcha, Jiří (referee) ; Janík, Daniel (advisor)
The bachelor thesis deals with the design of power and data installations in a multifunctional building. This building is composed of two parts - office space located on the first floor and four residential units located on the second floor. The theoretical part of the bachelor thesis deals with the basic definitions and principles for the creation of project documentation, at the end of the theoretical part is presented the proposal of artificial lighting and the design of emergency lighting of escape routes. In the practical part of the bachelor's thesis there is a completely processed project of electrical installation. The project consists of all the requisites necessary for the realization of the building and contains drawings of the floor plans of the two floors of the building, where the power and data wiring are drawn, also contains the diagrams of the connection of all the cabinets and the electricity meter cabinet, the power distribution diagram, the budget and the technical report. The design of the cabinets was verified using the SICHR calculation program.
|
|
|
Vliv stavebně technického řešení nemotorové komunikace na bezpečnost silničního provozu
Šauer, Vojtěch
The thesis discusses the issue of roads designated for non-motorized traffic with respect to their structural and technical solutions and the effect on road safety. The first part focuses on the analysis of unpowered transport infrastructure and legislative innovations in cycling. The practical part analyzes the evolution of accidents among cyclists, compares the theoretical requirements for the creation of infrastructure and practice. More specifically focuses on infrastructure planning and creation of project documentation. Part of it's own tender evaluation and project documentation paths for pedestrians and cyclists, the design of measures aimed at increasing the safety of road users and the quality of the project.
|
|
|
Project documentation of wiring for the revitalization of residential house
Štangl, Jan ; Tesař, Radek (referee) ; Bátora, Branislav (advisor)
This thesis deals with the issue of the revitalization of the outdated electrical wiring in houses with regard to the valid standards. In the introduction to the theoretical part of the thesis the current connection conditions of the E.on distribution network are summarized, then there is a subchapter dedicated to the ways of conductors storing. The following section is devoted to the common spaces as far as lighting and socket circuits are concerned. The thesis continues with a part which contains an analysis of the existing conditions of the building, including the calculation of the risks of unprotected and protected building. The work is then directed on practical technical documentation heavy-current (main lead, lead to the distribution boxes, lightning conductor and grounding) and light-current (common TV antenna, house phone) wiring in the building. The mentioned section contains calculations necessary for determination of the correct wire cross section based on the way of storing, ambient temperature and output power. In the same section there are processed also lighting designs in all the common areas (for example, the intensity of the illumination determined by the ČSN standards emitted by the Czech Office for Standards, Metrology and Testing). In chapter no. 4.9 the lightning conductor including the earthing of the building is drawn up.
|
|
|
Design and implementation of smart wiring in the apartment with visualization
Valo, Marek ; Pěcha, Jiří (referee) ; Bátora, Branislav (advisor)
This thesis deals with the classic and system wiring as well as their implementation and visualization environment for its operation. The aim of this work is to implement the project of the existing high-voltage and low-voltage wiring housing units accompanied by a design of the system wiring. This design is then fully implemented. In the beginning of the work is introduction to system wiring as such, added by a brief comparison of current systems. Followed by two chapters dealing with two selected systems for the realization of wiring. These chapters succinctly capture the essence of the system, its characteristics and features offered by each system. The last part deals with project design of wiring for the residential unit and the procedure for its commissioning. The practical part is dedicated to creating drawings with the existing power and low voltage distribution systems, the design of the smart wiring and electrical switchboard, together with possible modifications. The project documentation also discusses technical report. Finally, the selected system is tested and commissioned according to the requirements.
|
|
| |
|
|
Project management and its application in business practice
Ludvík, Ladislav ; Hron, Jan (advisor) ; Věra, Věra (referee)
The thesis aims to apply project management principles within the framework
of the Railway Infrastructure Administration, state organization. Project management
is one of the options for effective management of the company and its processes.
For that purpose, it was necessary to study the management structure in Railway Infrastructure Administration which was subsequently analysed within the companys change management process for specific conditions.
A partial objective hereof is a detailed analysis of an individual project implemented by the company with the use of project management tools. Based
on the findings obtained, proposals on ways of improving the quality of future project management will be presented.
The thesis presents an assessment of the situation with respect to the planned objectives, and proposed measures or solutions to improve the efficiency of the changes
as suggested.
|
|
|
Electrical installation in family house
Tesař, Jan ; Procházka, Petr (referee) ; Ondrejček, Vladimír (advisor)
This Bachelor Thesis is concerned with the design of the electrical installation of a family house. There are two main parts of the thesis – theoretical basis and the main design. In the theoretical part the reader is at first introduced to a powerline section, in which the electrical installation from the powergrid to a terminal equipment is described. Next part is about a low voltage wiring, where the commonly used types of wiring and devices are described. In the third part the reader can read about a lightning protection and its inner and outer parts. The main design consist of situational designs of devices and wiring in the house, switchboard designs, revision of the electrical protection and the technical report.
|
|
|
Comparison of design classic and smart wiring of house
Valo, Marek ; Novotný, Jan (referee) ; Bátora, Branislav (advisor)
This work contains requirements for the design of high-voltage and low-voltage classic and smart wiring. The aim of this work is to implement a project of classic and smart wiring for house and their subsequent comparison. In the beginning is introduction to wiring as such, insight into history, a brief presentation of contemporary species of wiring. The following chapter provides an analysis of high-voltage systems and criteria in its designing, which is based on the currently valid standards. The chapter contains also a brief excerpt dealing with ways of storing wires in buildings and installation zones individual rooms. Chapter of system wiring briefly describes the idea of this kind of wiring and its function. Introduction is focused on explanations of the system wiring, then the chapter directed to a specific producer used in the design of the project itself. In the chapter number five the problem of low voltage wiring and methods for their design are analysed. The following section deals with the design of wiring own project (classic and system) for a family house, designing switchboard, budgeting and technical reports. In conclusion, these two types of wiring are compared in terms of design, project documentation and budget. The practical part is dedicated to creating drawings containing high-voltage and low voltage wiring, switchboard scheme, budget, calculating illuminance and technical reports. The project documentation is discussed further in the technical report.
|
|
|
Electrical installation of multifunctional house using intelligent control
Kroutil, Roman ; Bátora, Branislav (referee) ; Mastný, Petr (advisor)
The aim of the thesis is the theoretical clarification of the issue of intelligent electrical installations, electro project documentation creation and a specific development project, smart wiring. The work consists of three parts. In the first part the reader is becoming familiar with the power distribution problems and subsequently in details with the issue of intelligent electrical installations. This thesis describes the development, standards and use of the intelligent systems. There is also a description of the various manufacturers and their systems, which are widespread in the Czech Republic, followed by comparing them according to selected criteria and finally the advantages and disadvantages are compared to the traditional smart wiring. Another part deals with the principles and methods of making electrical projects. There are all part of the project documentation procedure for their creation, the principles to be observed, and the most important and most relevant standards, laws and regulations relating to the right wiring are given. The last part is completely processed wiring project using intelligent control. The project consists of all the elements needed for building management, which are drawings of floor plans of all floors of the building, all switchboards schemes, scheme and system power distribution, inventory of material used and the technical report.
|
guest ::
