|
|
Apartment building
Poláček, Vojtěch ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is project documentation of new appartment building in Oblekovice on street Šatovská, the part of city Znojmo. The proposed object is located in an existing suburban developement. It is a three-storey apartment building, partly witch a basement with loggias, a terrace and a flat vegetated roof. In basement we can find cellar cubicles for each apartment unit. On the 1st floor there are two apartment units categories 3+1 and technical facilities, on the 2nd floor are three apartment units, two of them categories 3+1 a one of them 1+1 and on the 3rd floor are two apartment units categories 4+kk. Designed appartment building is built with modern technologies, load-bearing walls of aboveground part of the building are made from clay blocks in Profi and AKU variants. Underground part of the building is made from structural formwork with concrete and rod reinforcement. Building’s foundation will be made of cast-in-place concrete strip footing with reinforced concrete floor slab. The load-bearing part of the ceiling structure consists of semiassembled ceilings of the Miako type. Staircase is also made as reinforced concrete slab with stair steps made of concrete.
|
|
|
Low-energy detached house in Krkonoše
Ambrožyová, Jana ; Pilinszki, Martin (referee) ; Brzoň, Roman (advisor)
The aim of this bachelor thesis is design of low-energy detached house. The project is divided into two parts. The first part is the project documentation for building permission, and the second is focused on building services. Part of building permission is fire safety of building, acoustic and daylight assessment and assessment of constructions from thermal technology. The house located in Eastern Krkonoše mountains in Pec pod Sněžkou, Velká Úpa, Trutnov district. The house is connected to the electrical grid, water supply and sewage system. Part of the electricity is provided by photovoltaic panels on the gable roof. The building is located on a sloping plot and is designed as three-story house with residential attic, gable roof and counter dormer. Roof is insulated with over-rafter insulation. The building is based on foundation strips made from reinforced concrete. External walls of the underground floor are made from permanent formwork concrete blocks with reinforced concrete infill. Above-ground floors are designed from Porfix aerated concrete blocks. External walls of underground floor are insulated with ETICS. External walls of the upper floors are insulated with stone insulation and supplemented with a ventilated facade with wooden cladding. The floor structure above the underground floor is designed from monolithic reinforced concrete and above the first above-ground floor is formed by the Porfix floor system. On the underground floor there is garage, utility room, ski storage room and wellness area with bathroom and small kitchen. Kitchen, bathrooms and habitable rooms are located on the upper floors. Part of the documentation is the conceptual design of air conditioning and rainwater management. Because the building is designed in the mountains, I focused on heating system. I designed the main source of heating – air-water heat pump. I designed a floor heating system and for better thermal comfort is possible to use a wood-burning fireplace. The documentation also includes the Building's Energy Performance Certificate.
|
|
|
Family winery Plchut Mutěnice
Smržová, Tereza ; Bílek, Zdeněk (referee) ; Dýr, Petr (advisor)
The topic of this bachelor thesis is the design of a new family winery Plchut in Mutěnice. The design is based on the project developed in the course Architectural design 2 (AG032). The building is located on a plot of land on the north-western edge of the municipality of Mutěnice, on Vinařská street. The area is a well-known wine-growing region and a frequent destination for wine tourism. Above the mentioned land are situated vineyards. The land itself is sloping, the slope rises gently from the south-east to the north-west side. The surrounding buildings are mostly wineries. The type of soil is arable land. It is a grassed area without building and trees. Bellow the land is a road, railway and a cycle path. The building consists of two parts. The public or also social part serves mainly for the visitors of the winery, i.e., for tasting and buying wines. The apartments for visitors, administration and facilities for the winery staff are also situated here. The second part of the building is the production part used for the processing of grapes and wine production. These two parts contrast with each other in shape and facade. The production part has only a simple cuboid shape with a wooden cladding facade. This part only has one floor with a flat green roof. The main intention for the production part was a simple layout that will connect the individual rooms according to their purposes. The rooms are therefore arranged in the same order as the wine production progresses. The public part has two floors and has a gable roof with a pitch of 34°, which is approximately the optimum pitch typical of rural buildings. The facade of this part is made up of facade plaster, which should on the surface resemble concrete. The front of the building is glazed. Part of the gable is paneled with burnt wood. The back side is also paneled with burnt wood. The shapes and facades of both parts are intended to represent their function and by whom they will be used. The winery part is therefore designed as a simple shape, as it essentially is a production building. On the other hand, wine production is linked to nature, so the building is complemented by a natural element - wooden paneling. On the contrary, the public part uses a gable roof as a typical element of rural buildings, as it is a representative part of the whole building. However, as this is a space where visitors from cities will come to buy and taste the local wine, the facade of this section is intended to represent urban life - with a facade imitating concrete.
|
|
|
Resort "Na Hrázi"
Kubík, Tomáš Jiří ; Kolářová, Eva (referee) ; Kolář, Radim (advisor)
The diploma thesis deals with the new construction of a building for temporary housing (hotel) with a restaurant - Resort Na Hrázi. The construction is situated on a flat plot of land next to a nearby housing development in the cadastral area of Kozlovice near Přerov in the Přerov district. The building with three above-ground floors, covered with a flat single-skin roof, was designed exactly according to the investor's requirements. The vertical structures are designed from aerated concrete and sand-lime blocks. Horizontal structures are made of pre-tensioned ceiling panels. The roof structure is designed as a flat vegetated roof. The building can accommodate up to 60 people in 28 rooms. It also includes a restaurant designed for both hotel guests and the public. Diploma thesis is prepared according to the assignment in the form of project documentation for the execution of the construction.
|
|
|
Apartment building
Kománková, Barbora ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The subject of the bachelor's thesis is the working-out of project documents for apartment building in the district Poštorná in Břeclav. The apartment building is built from the POROTHERM system and it has a flat roof. It is a not free-standing three-story house with an elevator and there is not a cellar. On each floor are housing units. The first floor has technical structure of the building and one unit. There are two apartment units on the second floor and also on the third floor. Covering of building is warm deck flat roof. The building is insulated with the contact system ETICS from facade polystyren. Built-up area is 219,10 m2.
|
|
|
Apartment Building
Jaroš, Daniel ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The subject of the bachelor’s thesis is project documentation of new appartment building in Znojmo on street Trentská. Designed building is similiar to surrounding existing buildings, the house is four storeyed, with basement and recessing last storey with flat roof. Every above-ground floor has three residential units of categories one to three rooms with open-plan kitchen with the exception of last floor, where’s one bigger residential unit of three room category with open-plan kitchen. Residential unit n.3 in 1st floor is designed for person with reduced mobility. Designed appartment building is built with modern technologies, load-bearing walls of above-ground part of the building are made from clay blocks in 2in1 and AKU variants. Underground part of the building is made from structural formwork with concrete and rod reinforcement. Building’s foundation will be made of cast-in-place concrete strip footing with reinforced concrete floor slab. Load-bearign part of ceiling construction is made of reinforced concrete ceiling slab. Staircase is also made as reinforced concrete slab with stair steps made of concrete.
|
|
|
Administrative building
Zajícová, Dagmar ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of the diploma thesis is the elaboration of project documentation for the construction of administrative building in Brno. The main entrance to the building is oriented to the south-east. The building is L-shaped and it is designed as a two-storey, partly with a cellar. The perimeter bearing masonry of the above-ground floors is designed from ceramic blocks of thickness 300 mm and the internal bearing masonry of thickness 250 mm. After that the basement masonry is made of concrete blocks thickness 300 mm cast in concrete. Internal non-bearing masonry made of ceramic blocks thickness 115 mm. The insulation of the building is designed as a certified contact insulation system of EPS material. The horizontal bearing structures are designed as a ceramic prefabricated rib-and-filler floor with concrete grout. The stairs are designed as reinforced concrete monolithic. The roof is warm flat roof with an extensive vegetation layer.
|
|
|
Apartment building
Handlíř, Tomáš ; Pospíšil, Jaroslav (referee) ; Kacálek, Petr (advisor)
The bachelor's thesis deals with the documentation for the construction of an apartment building. Building is a two-storey partially basement object. There are four residential units on the upper floors of the building. Each apartment is endowed with a terrace or loggia. In the basement there are rooms for household equipment such as cellars, a drying room, a common room, a cleaning room and a utility room. Project is dealing with parking problems by creating 6 parking places. Masonry longitudinal construction with use of the Porotherm system is designed for construction system. Basement construction system is masonry with permanent formwork concrete blocks. Stairs and ceiling structures are designed as cast-in-place reinforced concrete. Foundation is designed as plain concrete foundation strips. Roof is a warm flat roof with modified bitumen membrane for the main waterproof layer. The building is insulated with the contact thermal insulation system ETICS made of facade polystyrene.
|
|
|
Residential housing Troubsko
Číž, Martin ; Galata, Jindřich (referee) ; Štěpánek, Ladislav (advisor)
The aim of the bachelor thesis is a project documentation for the construction of an apartment building. Designed appartment building is new building consisting of two independents sections with separate entrances and staircases, both sections are identical only mirror imaged. Floor plan shape of each section is rectangle. Objects have two above-ground floor and one basement. There is six dwelling units in each section, four of them are 3+KK in the first floor and basement and two 2+KK in the last floor. Dwelling units located in basement have access to garden and units in above-ground floor have balcony or loggia. Last floor is recessing and thanks to that there is a place for spacious terrace. In the basement there are cellars for each appartment and utility room. Parking is provided outside the building on the paved land. Foundation construction of building is foundation strips supported by gravelly piles, masonry cunstruction is used for all the floors and ceilling are cast-in-place reinforced concrete thermal insulation of the facade is made with ETICS system. Roof is warm flat roof with PVC foil. Facade is insulated with polystyrene and in the area of fire belts there is used mineral insulation and foam glass.
|
|
|
Police district department of the Czech Republic, Brno-Černovice
Vaníček, Marek ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The subject of the master thesis is design of a new detached office building for public administration of Czech Republic Police as a district department in Brno-Černovice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by green roof. There are office rooms, sanitary facilities, archives, interrogation rooms, pre-trial detention cells, garages, storage rooms and dog cages in the above-ground part. In the basement, there are technical facilities and shooting range backround. Structural system of the building is wall longitudinal masonry system from clay blocks. The ceiling structure is from cast-in-place reinforced concrete. The part of the building is with ventilated facade a nd rest is insulated with contact thermal insulation.
|
guest ::
