|
|
Adaptation and modification of the industry hall
Benda, Lukáš ; Hejl, Jaroslav (referee) ; Klusáček, Ladislav (advisor)
The master’s thesis is focused on a design of reinforced concrete refabricated skeleton of the industrial hall. Object of the design are two internal traverse frames of the hall which consists of reinforced concrete truss, columns, girder and concrete flat foundation. Thesis includes working-out of static calculation, elaboration drawings of shape, reinforcement of solved elements and evolvement of assembly drawings. The rest of the project parts are not analyzed.
|
|
|
Heating of Industrial Halls
Sovák, Nikola ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
This theses deals with large objects heating issue, more precisely, heating of industrial halls. The theses focuses primarily on the most effective way of heating, given the economical and hygienical functionality of the object. Heating options of the object and selection of the most appropriate one, according to the specified documents, are also mentioned in this work.
|
|
|
Sanitation installation and gas installation in a factory unit
Maslík, Michal ; Vališ, Ivan (referee) ; Vrána, Jakub (advisor)
This thesis deals with health - technical and gas pipeline installations in the industrial hall. The building is situated in Frydek Mistek. The theoretical part compares the applicable technical rules for gas in Slovakia and the Czech Republic. The work also deals with the issue of determining the size of the reservoir water heater in several variants and compared to surveys by the use of hot water in similar objects. The design part is then developed addressing health - technical and gas pipeline installation for the specified object of the industrial hall.
|
|
|
Strengthening of the industry ceiling structure
Neděla, Lukáš ; Požár, Michal (referee) ; Klusáček, Ladislav (advisor)
The subject of my thesis is a strengthening of an industrial ceiling structure. The work consists of a theoretical and a calculation part. The theoretical part defines the structure problems in detail. The calculation part consists of a static calculation and technical drawings. The output of the thesis is the solution for ceiling construction amplification and a demonstration of its correctness and a ca- rying capacity including construction documents.
|
|
|
Study of Precision of the Stability Analysis
Sotulář, Jiří ; Pilgr, Milan (referee) ; Hron, Lukáš (advisor)
The thesis deals with the precision of the stability analysis of the pressed member. The loss of stability of the bukling is determinate by using several metods, which are compared each other. The thesis is partitioned into three parts that works together. The first part deals with the theory of analysis of the buckling stability. Here is described the gradual solution of analytical analysis for real beam and here is described the final compared for ideal, imperfekt and real beam too. It is also short solved buckling by using software. In the second part is compared by using computing systems and anylitical analysis for several basic buckling systems. The results of the compared are summarised in the final graphs and tables for each solved element and systems. In the third part are designed and static checked load-bearing element of steel storage hall. The buckling beams are checked by using findings from the previous analysis.
|
|
|
Production of women´s clothing
Šťastná, Vladimíra ; Svoboda, Jiří (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The theme of my bachelor project is design of industrial factory producing women´s clothing in Brno – Zidenice. Building site in sloping terrain is used for right orientation of 3 buildings – an industrial hall, an affiliated storehouse and an auxiliary technic base. Part of the industrial hall is cantilevered and also the orientation reacts with the environs. Main ideas were to use the view and to group building to optimize producing process, also to build up satisfactory base for employees, as well as to impress people inside and outside the factory.
|
|
|
Industrial building
Michálek, Vojtěch ; Pilgr, Milan (referee) ; Sýkora, Karel (advisor)
In the bachelor thesis a project for steel construction of an industrial hall in Brno area is developed. The extent of the ground plan of the hall is 30x63m with maximum height of 17,300m. The main load-bearing structural elements such as suspended purlin, truss bond timber, noggin pieces, solid-poles forming a cross linking with the bond timber, base and crane runway, are designed and considered in the static calculation. The statement of material and design documentation consisting of the design, cross-section, production drawing of a bond timber and selected details are part of the thesis.
|
|
|
Steel structure of an industrial building
Jílek, Josef ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
This thesis deals with structure of the single-aisle steel industrial hall in accordance with the arrangements of the building with a span of 30 m, a height of 84 m and corresponding height of the cantilever of a crane track girder is 9,0 m. In the hall are considered two cranes with a capacity of 50/12,5 t and 32/8 t. The main bearing element is formed by lattic truss stored on solid pillar down anchored in transverse direction. Distance of transversal pillars is 12 m and between them designed hanging purlins. The structure is designed for the district of Brno.
|
|
|
Technology and Innovation Centre Telč
Abrhámová, Tereza ; Suchánek, Petr (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The aim of the thesis was drafting of a technology and innovation centre in the developing area of city Telc -in the borough called 'Za Stinadly'. Objects, which are designed for various operations of small and medium enterprises, cover the maximum of provided area and their layout fully respects the contour lines. The entrance into the area is provided from the Trebicska street and the conflict-free movement of persons and vehicles is secured, too. Production units are divided into two types. The thesis is aimed on the production unit of type A with the production area of 75m2. Each unit has facilities for ten employees and consists of an office and an industrial hall. Important requirement was the variability of space. Units are connected to the endwise set of twelve, therefore they are dispositionally linked and easily connectable according to the customer's needs.
|
|
|
Woman´s Clothing Factory
Cahová, Barbara ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The study of women's ready to wear clothers solves new manufacturing and administrative area located in an appartment neighborhoods, a cemetry with crematorium, an army base and wooded park Akatky in Brno, Zidenice. The structure is incorporated into slightly steep terrain close to current buildings and freely exemplifies them with it's spacious composition. The building is separeted into two functional units, one smaller structure and other larger. The first one contains the company's administration, restrooms and dining area. All of the warehouses are in the other part-essential materials, final products, cutting area, futhermore hardware rooms and at last the production hall itself. There are parking lots, pedestrian areas and green areas with planted trees to be used in summer months for short rest.
|
guest ::
