|
|
Network infrastructure performance analysis
Barniak, Martin ; Verner, Lukáš (referee) ; Krkoš, Radko (advisor)
This thesis deals with analysis of network infrasctructure. It focuses on devices like a switch and router. To analyse a network we usually use resources which are divided into basic and advanced. Basic resources are the most commom like a ping, trace route, netstat, route or arp. The term advanced means network analyzers. Network analyzer is Optixia XM2. Next are described individual key parameters which are dependent on function and reliability of computer network. Thesis describe measurement methods like RFC 2544, RFC 3393 and EtherSAM. The conclusion is devoted to individual measurements and their evaluation.
|
|
|
Active IP Geolocation for Verification Host Position in Internet
Balej, Jiří ; Róka, Rastislav (referee) ; Zdrálek, Jaroslav (referee) ; Komosný, Dan (advisor)
Dissertation thesis deals with methods for finding the location of the device in the Internet, based on knowledge of the IP address. The process is called IP geolocation and is currently solved by geolocation databases or by measurement of network properties to the IP address. The disadvantage of nowadays geolocation databases is an incorrect information about some locations, because they can be in large distance from correct position. The aim of the thesis is to develop a method for verification of a position from geolocation database using delay measurement. Because of it, there is a detail analysis of influence of partial delays on the distance estimation accuracy, calculated using measured delay between the landmark and the target IP address. For the same reason, long-term delay measurement was performed, where the IP geolocation accuracy was compared using calibration data from previous measurements. On this background, Cable Length Based Geolocalisation (CLBG) method is proposed. Principle of this method is built on the properties of partial delays, which depend on the length of transport media. Firstly, the method measures round trip time (rtt), which is subsequently lowered by intermediate devices and end stations delay. The geographical distance is estimated using signal speed in the transport media. Further, the winding media parameter is established, which is used to determine a constraint around the landmark. The intersection of all constraints defines the area, where the target IP is. The IP geolocation using CLBG gives better results than simpler methods (ShortestPing, GeoPing and SOI), in comparison with more advanced methods (CBG and Octant) the accuracy is similar. The disadvantage of the CLBG method is the size of region, where the target lies, but this is due to its purpose. The position found in geolocation database can be checked by evaluation if it lies in the region.
|
|
|
Analysis of the causes and solutions proposed to tram transport delays from the transport and construction point of view
Kopecký, Vojtěch ; Svoboda, Richard (referee) ; Valehrach, Jan (advisor)
The thesis Analysis of the causes and solutions proposed to tram transport delays from the transport and construction point of view focuses on the issue of delays and speed drops in tram transport, especially on the causes of their occurrence and ways of their elimination. The thesis examines the current state of the Brno tram system, with a focus on the slowing elements in the system and the locations with frequent delays, including what causes these delays. The thesis also examines the possibilities of speeding up tram transport both from the point of view of transport and from the point of view of track layout. In the final part of the thesis, selected sections of the Brno tram system are analysed in more detail and on the basis of these analyses, measures are proposed that lead to the acceleration of tram transport and the elimination of delays that occur in it.
|
|
|
Network tester
Štainer, Martin ; Člupek, Vlastimil (referee) ; Zeman, Václav (advisor)
The objective of this thesis is the issue of network parameters measuring. Measurement methodology and tester concept were designed. Based on the designed tester concept a plugin for Apache JMeter was implemented. Two experimental tests were run based on the methodology designed, with their objectives set to explore the difference in performance between QUIC and TCP protocols.
|
|
|
Analysis of the dependence of communications services to the delay and QoS optimization
Schön, Martin ; Číka, Petr (referee) ; Hošek, Jiří (advisor)
This thesis discusses wireless network standards 802.11a/b/g/n. First part explains basic principles of networks and media access. Next the standard IEEE 802.11, general QoS parameters and their application in wireless networks, according to standard 802.11e are analyzed. Second part of the thesis verifies the acquired knowledge in simulating program Opnet - effects of the delay, jitter and packet loss on VoIP call are tested. In the last part of the thesis a network for video streaming has been designed. The video was streamed in different qualities and the influence of other network traffic (with and without the support of QoS) on the video streaming was tested.
|
|
|
Analysis of the communication path attributes for IP geolocation
Rajnoha, Martin ; Komosný, Dan (referee) ; Balej, Jiří (advisor)
The aim of this thesis was to study current resources to find location of stations in the network Internet, mainly active methods that are based on delay measurements. Describe origin of the delay and its parts. Next create an application that is able remotely measure the delay between stations and convert this delay to distance. Aplication calculate geographic position of station on based this distances. For measurement was used experimental network PlanetLab.
|
|
|
Temperature Dependence of PMD
Drábek, Jakub ; Hanák, Pavel (referee) ; Münster, Petr (advisor)
Bacherol thesis describes the problems of polarization mode dispersion-PMD. Size of the delay PMD is a random variable that varies in time. When operating at high data rate communication links is one of the major problem of the optical fiber. PMD value affects many different environmental influences as temperature, and therefore the measurement of PMD become standard in deploying high-speed optical networks.
|
|
|
Use of optical cable properties for geolocation in the Internet
Chmelař, Jakub ; Verner, Lukáš (referee) ; Komosný, Dan (advisor)
This thesis deals with the IP geolocation which estimates the geographic location of hosts in the Internet network. The knowledge of geographic location can be used both for targeting specific services and information, such as advertisement or weather forecast, and for better utilization of transport network because it is possible to serve content from sources which are located closer to client. The main topic of this thesis is the Speed of Internet geolocation method (SOI), which is an active method based on measurement of latency in network. The theoretical part of the thesis explains how to perform these measurements and briefly describes a few more active geolocation methods. The practical part includes full description of SOI implementation created using Python programming language. This implementation was subsequently used to accomplish a sequence of measurements which allowed accuracy comparison with other geolocation methods. The final part of this thesis evaluates results of these measurements and offers a few possible changes which could improve accuracy of described implementation.
|
|
| |
|
|
Audio Effect Design Based on Delay Line
Bilkovič, Ondrej ; Balík, Miroslav (referee) ; Říha, Kamil (advisor)
The aim of this thesis is the design and construct a commercial guitar delay stomp box, by implementing the analogue technology BBD. The thesis includes explanations of theoretical principles needed in order to design such device. The aim is also to elaborate on the process of designing the individual sections of the device and testing their properties, and testing the properties of the device as a whole.
|
guest ::
