|
|
Heat Pump in the Heating System
Andrš, Matěj ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The bachelor thesis deals with the design of heating of a newly built family house. The theoretical part introduces heat pumps and deals with their basic characteristics and types of heat pumps. The calculation part describes the specific design of the heating of the building and the design of individual components in the heating system. A ground/water heat pump is proposed as the heat source, where heat will be extracted from the ground using deep boreholes. The heating of the building will be done by underfloor heating. The hot water will be prepared in a heat pump. The technical report then describes the design and technical requirements.
|
|
|
Solutions of engine rooms at heat sources
Macík, Ondřej ; Vyhlídalová, Karolína (referee) ; Počinková, Marcela (advisor)
The content of diploma thesis is a solution for heating and warm water preparation with application of an experimental measuring. My experimental measuring is experimental block. The block unifies parts of heating in boiler room in one system. The main object of this diploma was to learn to control the block and to measure important working status. In the second part was applied in first variant normal connection of boiler and in second variant was applied the block. The teoretical part is description of normal connection of boiler and development from other block systems to experimental block.
|
|
| |
|
|
Heating of the administrative building
Kadlček, Ondřej ; Vendlová, Lucie (referee) ; Počinková, Marcela (advisor)
The objective of the bachelor´s thesis is a office building. The theoretical part deals with the distribution of hot water heaters, according to various criteria and their connection within the heating system. In the calculation part, a detailed design of the heating of the building is made. Air-to-water heat pumps are designed as a heat source. The building is heated by panel radiators, floor convectors and floor heating. Forced ventilation is provided by air handling units. The preparation of hot water is solved by preferential heating. The project part contains a technical report and drawing documentation.
|
|
|
Systems of energy efficient buildings
Šlampová, Kateřina ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The topic of this diploma thesis is systems of energy efficient buildings with a focus on the building envelope. The first theoretical part describes the quantities that we consider when designing the building envelope. The second half of the theoretical part is with reference to the experimental part of the thesis focused on a special type of vertical perimeter structure, namely walls with live vegetation installed from the outside of the structure. The second, practical part of this work, deals with the design of heating and hot water supply for a multifunctional building. The design is elaborated in two variants - heating by means of radiators in the first variant and in the second variant by means of floor heating for residential units of the solved building. The third part define an experiment, which had the task of comparing the measured quantities on two types of vertical perimeter structures, namely a structure with growing greenery from the outside and an identical structure only without a layer of greenery. At the same time, the task was to check the possible influence of the applied greenery on heat losses, and thus the design of the heating system.
|
|
|
Heating System of Libraries
Dlabajová, Pavlína ; Adam, Pavel (referee) ; Počinková, Marcela (advisor)
This study presents the structure of the heating system in the library of Masaryk University of Science with the address Kotlarska 267/2, 611 37 Brno. In particular, this study will examine the calculations of the heating output, proposals for sources of the heating output, preparation of the hot water, heating surfaces and the proposal for the hot water for the hydraulic piping. Additionally, the author will conduct an evaluation of the dimensions as well as a hydraulic assessment of the pipeline, the design of the pumps, and lastly the safefy equipment.
|
|
|
Radiant heating systems.
Fouček, Petr ; Bečvář, Jaroslav (referee) ; Katolický, Jaroslav (advisor)
The aim of my work on the theme„Radiant systems heating” is to summarize used systems, it’ s individual components, pass judgment on preferences and shortcomings of this systems. The work is oriented on general familiarization with radiant heating and approximation the proposition floor heating and rating industrial buildings, thein parting and identification with thein particular principle.
|
|
|
Single-family detached house in Březina
Pastva, Lukáš ; Sukop, Lukáš (referee) ; Ostrý, Milan (advisor)
This bachelor’s thesis focuses on the development of a documentation for a detached family house in Březina. The house is designed for four people and consists two floors. Gable roof is over the main house and a flat roof over the adjacent carport, which has green roof. The base slab is made of reinforced concrete and is placed on a layer of foam glass aggregate. The envelope walls are designed from ceramic blocks filled with insulation. The carport is made of fair-faced reinforced concrete. The first floor contains an utility room, a study, a bathroom, a small toilet and a social part of the house. On the second floor is the private part of the house which consists of a master bedroom, rooms, and a bathroom and a separate toilet. The HVAC systems are designed for proper functionality of the building. The house will be heated using an air-to-water heat pump and heat distribution will be ensured through underfloor heating. The air exchange will be ensured by an air handling unit in combination with heat recovery. Fresh air will be supplied to living areas and extracted via sanitary facilities outside the home. Rainwater will be accumulated in a tank and further used for garden irrigation. Excess water will be infiltrated into the ground on the property. The project also includes an energy label prepared in the Energetika software. The designed family house falls into the classification class ,,A - exceptionally energy efficient'".
|
|
|
Energy-efficient building
Somogyiová, Viktória ; Wierzbická, Helena (referee) ; Počinková, Marcela (advisor)
The aim of the bachelor’s thesis is to design a passive single-family house and develop its project for building permission. First part of the thesis is dedicated to structural and architectural designs. The building is designed as a two-storey detached house with gable roof and attached garage with flat green roof. Plot is located in a sloping terrain in Brno-Líšeň. First floor is partially under the ground and includes storage rooms, utility room and social zone consisting of living room and kitchen with dining area. The second floor is proposed as a private zone including two bedrooms, master bedroom with dressing room, shared bathroom and toilet. The building is based on strip foundations made from reinforced concrete. The structure of the first floor is from concrete blocks of permanent formwork, the second floor is masonry from sand-lime blocks. External walls are insulated with ETICS. Floor slab is made from hollow core pre-stressed concrete panels and roof structure consists of a timber truss. Second part of the thesis presents elaboration of energy certificate and concepts of following building services: ventilation with heat recovery, water and electricity supply, wastewater treatment plant and stormwater treatment. The focus of this part is a project documentation of heating system using water-air heat pump in combination with floor heating. Part of the thesis are also solutions of fire safety of the building, daylighting, thermal and acoustic properties of proposed structures.
|
|
|
Low-energy detached house in Krkonoše
Ambrožyová, Jana ; Pilinszki, Martin (referee) ; Brzoň, Roman (advisor)
The aim of this bachelor thesis is design of low-energy detached house. The project is divided into two parts. The first part is the project documentation for building permission, and the second is focused on building services. Part of building permission is fire safety of building, acoustic and daylight assessment and assessment of constructions from thermal technology. The house located in Eastern Krkonoše mountains in Pec pod Sněžkou, Velká Úpa, Trutnov district. The house is connected to the electrical grid, water supply and sewage system. Part of the electricity is provided by photovoltaic panels on the gable roof. The building is located on a sloping plot and is designed as three-story house with residential attic, gable roof and counter dormer. Roof is insulated with over-rafter insulation. The building is based on foundation strips made from reinforced concrete. External walls of the underground floor are made from permanent formwork concrete blocks with reinforced concrete infill. Above-ground floors are designed from Porfix aerated concrete blocks. External walls of underground floor are insulated with ETICS. External walls of the upper floors are insulated with stone insulation and supplemented with a ventilated facade with wooden cladding. The floor structure above the underground floor is designed from monolithic reinforced concrete and above the first above-ground floor is formed by the Porfix floor system. On the underground floor there is garage, utility room, ski storage room and wellness area with bathroom and small kitchen. Kitchen, bathrooms and habitable rooms are located on the upper floors. Part of the documentation is the conceptual design of air conditioning and rainwater management. Because the building is designed in the mountains, I focused on heating system. I designed the main source of heating – air-water heat pump. I designed a floor heating system and for better thermal comfort is possible to use a wood-burning fireplace. The documentation also includes the Building's Energy Performance Certificate.
|
guest ::
