|
|
Measurement of the vibrations
Diblík, Jan ; Kolouch, Jaromír (referee) ; Biolková, Viera (advisor)
Diploma thesis is focused on principles of measuring the vibrations using accelerometers and using them for making vibration measuring instrument with focus on modern integrated digital accelerometers. In the first part are described ways to measure acceleration and vibrations with available technical supplies with respecting place and purpose of measuring. In practical part are measured characteristics of used sensor, instrument for measuring vibrations is designed and built and for few experimental object vibrations or acceleration are measured and graphical interpreted.
|
|
|
Driving safety systems
Rektořík, Jiří ; Rozsíval, Jan (referee) ; Suchý, Jan (advisor)
Bachelor thesis is focused on the description and measurement of characteristic variables that affects driving comfort. Driving comfort is closely related to driving safety. This thesis deals with measured quantities but also deals with comfort in the cab and optimally adjusting elements in the cab.
|
|
| |
|
|
Balancing of hydraulic machines
Buben, Marek ; Soukup, Lubomír (referee) ; Nováková, Naděžda (advisor)
This bachelor’s thesis is technical research dealing with issues of static and dynamic balancing of rotors. The first part of this work is devoted to explaining basic concepts associated with problems of balancing. As for the next part, this work defines types of imbalances and basic methods of balancing. The last part is devoted to describing machines for static and dynamic balancing and their operation in practice.
|
|
|
Design innovation of machinery in companies for mold machining
Jezbera, Jaroslav ; Kubík, Roman (referee) ; Slaný, Martin (advisor)
This thesis is focused on innovation of machinery and equipment in the establishment "Nástrojárna GREGOR s.r.o." with its headquarters in Skřivany, which specializes in the production of molds. Matters that require attention when buying and setting up new machinery are taken into consideration, and accessories that are usable in the manufacture of molds are reviewed. The goal of this thesis are two proposals for placement of new machinery are made and evaluated.
|
|
|
Driving comfort
Plánka, Jakub ; Blaťák, Ondřej (referee) ; Vančura, Jan (advisor)
The bachelor thesis describes characteristics of ride comfort. Defines methods to evaluate ride comfort and proposes appropriate value for measurement. Thesis Describes parts of vehicle which contributes to overall driving comfort and formulates factors affecting vehicle in motion.
|
|
|
Machining of long cylinders
Nádvorník, Vít ; Jaroš, Aleš (referee) ; Fiala, Zdeněk (advisor)
The bachelor thesis deals with the machining of long cylinders and production machines used for the machining technology. The main part contains a description of the vibration system of machine-tool-workpiece and analyzes active and passive methods of its elimination. It also deals with the wear of the cutting tool and a description of the parameters which have a direct effect on tool life.
|
|
|
Study of fatigue life of roller bearings type 6204 -2Z
Poláček, Vojtěch ; Svoboda, Petr (referee) ; Klapka, Milan (advisor)
This bachelor thesis deals with the basic description of produced by fatigue failure of ball bearings. In the paper there is a description of basic diagnostic methods of machine parts. Following there is a study of vibration, their recording and the evaluation concerning bearing lifetime. The aim of the experimental part of the paper is to check the functionality and suitability od the VDT2000 analyzer and VDT Control Center software, both made by company VidiTech, s.r.o. together with the SA67 laboratory experimental stations owned by the Department of Design at Faculty of Mechanical Engineering, which were used for examining the 6204-2Z bearings. The aim of the lifespan exam is to confirm the reliability of the bearing failure warning by the analyzer and to assess the ability to record the first stages of bearing damage.
|
|
|
Proposal of mechatronic system with vibro-insulator
Fargač, Michal ; Březina, Tomáš (referee) ; Hadaš, Zdeněk (advisor)
The theoretical study of this thesis deals with options available for preventing the passing of vibrations on precision mechatronic system through the structure on which they are stored. The practical part consists of the design concept of vibro-insulating mechatronic system. At first there is an analysis of the unique structure in ANSYS Workbench. Next chapters describe how to connect the ADAMS and MatLab Simulink softwares for the purpose of co-simulation of dynamic systems. With this co-simulation, the carrying structure of the system is being analyzed. Finally, the concept of vibro-isolation system is designed and simulated for its response to force load.
|
|
|
Modelling of mechatronic system with flexible parts
Kšica, Filip ; Vetiška, Jan (referee) ; Hadaš, Zdeněk (advisor)
This thesis deals with the simulation modelling of mechatronic system with flexible parts using ADAMS and Matlab/Simulink. The beginning of thesis is dedicated to the summary of available methods of modelling mechatronic systems with flexible parts. Next chapters describe different approaches of modelling flexible parts using analytical and numerical methods. In the following step, model of particular mechatronic system is created. System itself consists of a flexible beam part, electromagnetic vibration exciter and vibration power generator. Each part of the system is created separately in variety of programmes, including FEMM, ADAMS and Matlab/Simulink. At the end of this thesis, co-simulation of ADAMS and Matlab/Simulink is used to describe behavior of the complete system, especially energy conversion efficiency of vibration power generator and its impact on the system.
|
guest ::
