|
|
Virtuální zprovoznění výměníku nástrojů CNC stroje
Rajdl, Filip ; Staněk, Václav (referee) ; Vetiška, Jan (advisor)
The Master’s thesis deals with virtual commissioning of the CNC machine tool changer. First deals with current state of knowledge with a systematic analysis of virtual commissioning. The 3D model is created by physical properties, sensors, actuators and control signals. In the last part of this thesis, a PLC program and visualization is created. The programs needed to create a virtual commissioning are jsou NX 12.0 - Mechatronic concept designer, SIMIT Simulation Platform V10.0 a TwinCAT 3.
|
|
|
Electronics and CNC milling machine control
Tmej, Tomáš ; Zuth, Daniel (referee) ; Marada, Tomáš (advisor)
The diploma thesis focuses on the electronics design of a hobby CNC milling machine. There are analysed and described the individual electronic parts and components related to this problematic. Three electronics suggestions are made, these suggestions are compared. Then, one of these variants is selected and implemented. Next, is created a relevant PLC program to control the CNC milling machine with visualization for easy control.
|
|
|
The modernization of CNC system of milling machine EMCO
Kučera, Vítězslav ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This master´s thesis deals with the modernization of the EMCO milling machine control system. The theoretical part is focused on the basic description of CNC machine and current state of EMCO milling machine control system. The main point of this thesis is new control system design for given milling machine, when the proposed variants are described and compared according to construction and price. The one variant is selected that best suits the specified parameters. Also, in the TwinCAT development interface from Beckhoff the new control system is created and described in the end of this work.
|
|
|
Control of the SCARA robot using the Beckhoff control system
Madzia, Adam ; Jirgl, Miroslav (referee) ; Benešl, Tomáš (advisor)
This thesis deals with control of the SCARA manipulator. In the theoretical part of the thesis there are explained robotic systems. The construction of a robot is described in terms of kinematic pairs and structures. Next chapter is about the manipulation robot Epson H554BN and Beckhoff control system with used equipment. In the practical part there is a description about the realization of the manipulator connection. Basic functions for controlling manipulator´s drives and functions for kinematic transformation are described at the end of the thesis.
|
|
| |
|
|
Control of two-axis positioning table
Mičulka, Tomáš ; Kroupa, Jiří (referee) ; Houška, Pavel (advisor)
The bachelor thesis deals with design and implementation of software for control of two axis positioning table. Table control is implemeted in PLC with the Beckhoff EL 7642 card for DC motor control. Software is designed in the TwinCat3 enviroment, using TC_MC2 according to the PLCopen standard. The use of camming and gearing methods for central control of two motors is presented too.
|
|
|
Control of two-axis positioning table
Mičulka, Tomáš ; Kroupa, Jiří (referee) ; Houška, Pavel (advisor)
The bachelor thesis deals with design and implementation of software for control of two axis positioning table. Table control is implemeted in PLC with the Beckhoff EL 7642 card for DC motor control. Software is designed in the TwinCat3 enviroment, using TC_MC2 according to the PLCopen standard. The use of camming and gearing methods for central control of two motors is presented too.
|
|
|
NC control system on Beckhoff platform
Jelínek, Pavel ; Bradáč, František (referee) ; Vetiška, Jan (advisor)
This thesis deals with a creation of a control system of 3-axis milling machine. The beginning of the thesis is dedicated to the general description of the problematic of the numerically controlled machines and the technologies used in this branch. The next chapter describes mechanical and electronical adjustments of the machine. Following chapters are dedicated to the creation of PLC program and HMI using the TwinCAT software. In conclusion, this thesis deals with commissioning of the machine, measuring its geometrical accuracy and testing.
|
|
| |
|
|
3D engraving milling machine
Bosák, Daniel ; Vetiška, Jan (referee) ; Bradáč, František (advisor)
This thesis deals with rebuilding of a laboratory manipulator to 3D engraving machine. First part of the thesis describes the engraving technology and lists the most common types of engraving machines. Next, the initial state of the machine is analysed and modifications of mechanical and electrical equipment are suggested. Design, realisation of a control system and human machine interface are described. The Beckhoff TwinCAT programming environment is used. The last part of the thesis deals with practical realisation and commissioning of the machine. The results of the thesis can be used as an addition for lessons of Automation of Production Machines.
|
guest ::
