|
Engines for Le Mans Series
Herman, Pavel ; Blaťák, Ondřej (referee) ; Svída, David (advisor)
This bachelor´s thesis deals with the overview of development the drive units, which are used by racing cars of Le Mans endurance series, mainly the race 24 hours of Le Mans. In the first part is outlined the general characteristic the series and the race 24 hours of Le Mans itself. There are briefly described the instructions and the most important technological limitations, observed by designers. The second part contains an owerview of racing cars engines, which are interesting from the historical point of view either by their construction or by achieved success. The last part is devoted to the constructional comparison of drive units of present participants the Le Mans series, their description and the important technical specifications.
|
|
Piston for 50kW 4-stroke SI-engine
Spáčil, Tomáš ; Dundálek, Radim (referee) ; Svída, David (advisor)
This bachelor thesis deals with a primary proportions calculation design of the engine and a constructional piston design for four-stroke spark-ignition engine. It is also contains a design of crank mechanism and engine primary proportions. On the basis of empirical data I projected the piston primary proportions. Furthermore, this thesis deals with the solidity check of critical piston crosscuts according to the crank mechanism.
|
|
Alternative Drive of Automobile
Dubský, Jiří ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
This bachelor work deal with problems alternative drive for automobile with narrower intent on hybrid drive. Features run - down and description possible options for drive cars. Further is focused on cars with hybrid drive and on problems hereof unconventional drive with presentation characteristic feature, advantages and disadvantage.
|
|
Sport cars BMW - from history to present
Raffai, Peter ; Svída, David (referee) ; Dundálek, Radim (advisor)
Bachelor’s thesis incorporates vehicles of the Bayern Motor Works, which managed to become an everlasting icon among sports cars, and also recent models, which are determined to keep this tradition alive. Presented are some interesting technical innovations of division Motorsport GmbH and their evolution until present.
|
|
Tank Combustion Engines from History to Present
Arnošt, David ; Svída, David (referee) ; Dundálek, Radim (advisor)
This work shows summary of engines used in the best known tanks since the beginning of their producing until today. The first part deals with sorts of fuels which are used, theirs differences and specificts in comparison with current engine. After it, my work occupies by decription of development and producing of tank engines in single states. In the last part there is description of the tank T-72 which is in the equipment of AČR.
|
|
Piston of 4-stroke SI-Engine with 75 kW Output Power
Kalugin, Ivan ; Svída, David (referee) ; Dundálek, Radim (advisor)
This bachelor's thesis deals with calculating suggestion and structural solution of a piston for a 4-stroke petrol engine with 75kW output power. The structural solution includes determination basic dimensions of engine and crank mechanism. Final part is devoted to fort control of critical piston sections on the base of kinematics crank mechanism and indicator diagram.
|
|
Creeper
Pavelka, Roman ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
This bachelor project concerns with design solution of the creeper. Besides, the project specifies limitation of the chain gearings including various chain types. The project includes also the process calculation. Please find attached following design drawings General Arrangement, Sub- arrangements and Production Detail Design at the of the bachelor project.
|
|
Design Solutions and Development Trends of Formula Student Cars
Adámek, Ladislav ; Porteš, Petr (referee) ; Ramík, Pavel (advisor)
This bachelor´s thesis is engaged in history and description of progress and recent trends in Formula Student/SAE competition. The bigger part of this thesis is devoted to complex summary of structural designes of monoposts and construction units of most succesfull teams. The point of this survey was getting information about construction of competitor´s cars. Theese informations should be used for building own car.
|
|
Software for control of the velocity probe manipulator
Balusek, Radim ; Věchet, Stanislav (referee) ; Houška, Pavel (advisor)
The aim of this work is to create control software for the manipulator with three degrees of freedom used for measuring the temperature field and its activities to verify the model. Control manipulator is designed in the NI LabVIEW program. Furthermore, the work deals with the addition of the sensory system manipulator Swing. Part of this work is a description of the elemental characteristics controlled manipulators and the problem of their control is analyzed there. The practical part describes the structure of the proposal and its simulation software to verify the model.
|
|
Piston for 25 kW 2-stroke SI-engine
Bečka, Petr ; Dundálek, Radim (referee) ; Svída, David (advisor)
This bachelor thesis deals with a design of a piston for 25kW motorcycle engine. The work is focused to main dimension of piston, dimension of crank mechanism and strenght calculation of dangerous crosses. Piston would be able to work during common conditions of running.
|