|
|
Loudspeaker System for Reproduction of Low Frequencies with Directional Radiation
Skvaril, Šimon ; Husník, Libor (referee) ; Schimmel, Jiří (advisor)
Final product of this work is design of speaker baffle which will have directional radiation at low frequencies. In the course of the work, propagation of sound waves and their beaviour at obstacles are described. The computational method FDTD and the K-wave toolkit for MATLAB, which uses this method, are described. In MATLAB a virtual model of speaker baffle is created and proposed solution is verified. Next step is creation of scaled model of speaker baffle on which agreement of theoretical computations with real-world measurment is verified. Final step is creation of prototype of speaker baffle,, whose parameters are measured, including polar response.
|
|
|
Standard baffle - laboratory device
Hodinka, Tomáš ; Říha, Kamil (referee) ; Balík, Miroslav (advisor)
The purpose of this project is the design and the construction of a laboratory preparation for loudspeaker measurements, a standard baffle. Standard baffle is a rectangular panel with a loudspeaker placed eccentrically. Measurements with this baffle are then done in an anechoic chamber. The main purpose of a standard baffle is the ability to measure loudspeakers without the effect, that is caused by the pressure properties of a closed baffle and without an acoustic short circuit. The standard baffle is designed, so that it is self-supporting, transferable by 2 people, easy to be stored, modular and able to support loudspeakers that are up to 12 inches in diameter. The designed baffle is detachable into 3 parts. The base, the panel, and the inserts. The base is a big, heavy board with a key on the upper side. This key fits into a key groove in the panel and that allows the two parts to assemble. The plane is made of four layers of different types of plywood. That allows the design to make a compromise between the toughness and weight. The inserts are designed, so that the replacement and manipulation of loudspeakers during measurement are as past and as simple as possible. During measurement the loudspeakers are mounted in their respective inserts, which can be mounted and dismounted from the standard baffle without any tools. The test measurements demonstrated that the standard baffle is unsuitable for reference measurements. Resonance of the plane, reflections from the base, refractions from the outer edges of the baffle and potentially different causes unduly distort the results of measurements. These distortions are displayed with a considerable consistency even between different loudspeakers. This indicates that these distortions could be filtered oud by, for example, using a specialized software.
|
|
|
Design and Construction of Transmission Line Loudspeaker Cabinet
Dobiášovský, Jiří ; Schimmel, Jiří (referee) ; Balík, Miroslav (advisor)
Thesis is dealing with the topic of design and construction of the transmission line loudspeaker enclosures. Theoretical part is focused on speaker choice, its design elements and their influence on parameters of the speaker. Individual parameters of the speaker, mathematical equations for their determination and choice of suitable speaker for transmission line loudspeaker enclosure is furthermore discussed and defined. Principle of transmission line enclosures is discussed together with its advantages and disadvantages compared to other types of enclosures. The individual design elements and their influence on the resulting characteristics of the enclosure are described. In the practical part, with regard to the facts stated in the theoretical part of the work, a suitable speaker is selected and the subsequent design and construction of a variable transmission line speaker is described. This might serve as a teaching aid in future. Part of the work is also a description of procedures for measuring loudspeakers with multiple speakers or resonators.
|
|
|
Variable Two-Way Loudspeaker Cabinet - Laboratory Tool
Rehák, Jan ; Schimmel, Jiří (referee) ; Balík, Miroslav (advisor)
The objective of this work is to build a two-way loudspeaker system that will enable changing loudspeaker topology in both vertical and horizontal axes and to suggest two laboratory tasks. The theoretical part of this work will briefly discuss loudspeaker crossovers. Then it will discuss how topology of loudspeakers in a loudspeaker system can affect its behavior at crossover frequency. Frequency characteristics of various loudspeaker baffles will be shown. On these, the effect of a baffle’s exterior on its behavior will be discussed. A two-way loudspeaker system will be designed. The construction process and drawings of each part are also included in this work. The finished product will be tested and, following from these tests, a conclusion will be drawn about the validity of the theoretical assumptions of its design. After that, appropriate parameters of a crossover for the two-way loudspeaker system will be chosen.
|
|
|
Subwoofer for PA applications
Tylich, Ondřej ; Červinka, Dalibor (referee) ; Martiš, Jan (advisor)
The content of the bachelor´s thesis is theoretical knowledge in the field of loudspeaker baffles, their construction and design of the subwoofer according to the assignment. The work describes various types of used loudspeaker baffles. Their properties are defined for each of them. Some of the simulation programs are used for proper design. A suitable speaker is selected for the subwoofer application in PA technology. The parameters of the selected loudspeaker are verified by measurement. Based on these parameters, the design of the selected loudspeaker is calculated. Furthermore, the thesis addresses deals with the complete design process of the baffle for the selected speaker and its subsequent construction. After the construction, the port is tuned to the selected parameters. The resulting parameters of the designed subwoofer are verified by measuring the amplitude and frequency characteristics.
|
|
| |
|
|
Design and construction of subwoofer - low frequency loudspeaker unit
Holínský, Jan ; Schimmel, Jiří (referee) ; Balík, Miroslav (advisor)
This semestral thesis deals with the design and construction of deep-tone sound units –subwoofers and their use. There are listed descriptions of the individual types of sound systems, the possibilities of connecting the speakers with respect to the changes of the parameters speaker system, and then the design of the baffle with respect to the available materials. Moreover, the disassembled of VUE LMA hybrid solution is described. There are the mathematical relations for calculating the baffle parameters, furthermore there are also available basic programs for the design of the baffles. The purpose of this thesis is to get closer to the problem and to demonstrate the work with the simulation programs, a bandpass filter.
|
|
|
Up-firing loudspeakers for 3D Audio
Pešek, Marko ; Schimmel, Jiří (referee) ; Balík, Miroslav (advisor)
This bachelor theses dealing with study multichannel 3d audioformat Dolby Atmos and parameters of up–firing loudspeakers, which assures overhead audiosignal reproduction coming towards hearer. According to the knowledge is made proposal of up–firing loudspeakers, fabrication and measurement their properties.
|
|
|
Amplifier with Speaker Protection
Přibyl, Libor ; Schimmel, Jiří (referee) ; Kubánek, David (advisor)
The present work deals with the issue of speaker damage due to large displacement of the membrane at low frequencies. The main focus is the design and construction of the circuit to protect the speakers from this type of damage and the subsequent measurement of its parameters. The thesis includes theoretical predictions for the optimal design and implementation of the circuit. The work includes complete construction of equipment, including power supply and auxiliary circuits.
|
|
| |
guest ::
