|
Air-conditioning of offices
Trávníček, Tomáš ; Pavelek, Milan (referee) ; Janotková, Eva (advisor)
The aim of a master thesis is the proposal of the air conditioning system for one floor of offices in the administrative building. Propsal of the air conditioning system is based on the calculated ventilation air, further on thermal looses, thermal gains and then psychrometric calculation for summer and winter operation. Obtained values are the basis of the proposal of the air ducts with ending parts like a diffusers. It also obtains the proposal of the air conditioning unit with design of machina room. The proposal and all calculations are supplemented with drawing documentation and list of items.
|
|
Penzion Domažlice
Petráš, Vladimír ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
The aim of this diploma thesis is a project of a new building of a penzion with four floors. Penzion is situated in cadastral area Domažlice, in the centre of the town Domažlice. The building of penzion is free standing and it´s partially with a basement. There is one basement floor and three floors in this building. There is a facilities for restaurant, 2 conference halls and facillities for penzion on the first floor of building. The second and third floor are used for the accommodation of guests. There are 14 double rooms and one room for two immobile persons on the second floor. On the third floor, there are 12 double rooms and two double apartment. The basement of the building is used for parking and technical facilities of penzion. Roof of the building is designed two types of roofs. Three floors part of the building is covered by warm flat roof and the one floor part of the building is covered by green roof. Structural system consists of the cast – in – place concrete frame which is reinforced by masonry walls. Building envelope is insulated with contact thermal insulation. Facade of the one – floor part of the building and the back part of the building is designed from facade panels. Documentation of the diploma thesis is prepared for the building contruction. The graphical part of documentation has been processed in the Autodesk Autocad software. Thermal assesment has been processed in Svoboda software.
|
|
Static verification and variant design of steel structure of administrative building of Gasworks in Brno - Radlas
Štulrajterová, Terézia ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The subject of this master´s thesis is a recalculation of the existing structure, design, static analysis and economic comparison of two variants of this bearing structure of the administrative building Jihomoravská plynárenská located in Brno. Ground plan dimensions and height of both these variants are based on existing disposition of the building. The diameter of the circular floor plan is 16,088 m and height of the structure is 29,46 m. With this new proposal of solution A and B, lower weight of structure in comparison to the existing state has been reached. Both variants have a bearing column in the middle of floor plan and new solution of ceiling structure. The most advantageous from the economic and assembly point of view is variant B. Design of this variant was processed in detail.
|
|
Cultural Education Center
Pátková, Klára ; Pailová, Alena (referee) ; Maceková, Věra (advisor)
The thesis deals with the preparation of plans for a new Center of Culture and Education complex located in the town of Rychnov nad Kněžnou. The complex being designed is composed of two interconnected parts. Library, educational center, café and technical facilities are located in the main part of the building. The main part has three floors and a partial basement. The structure consists of reinforced concrete frame with ceilings formed by point-supported slab. The building is covered with warm flat roof. The second part of the building is a one-floor multipurpose hall with facilities. Load-bearing structure of the roof consists of glue laminated girders supported by columns. The facade is partly designed as a ventilated cladding with cement-bonded particle board, partly as a contact thermal insulation system.
|
|
Sanitation installation and gas installation in multifunctional house
Tůmová, Eliška ; Bárta,, Ladislav (referee) ; Vrána, Jakub (advisor)
Bachelor's work deals with sanitation instalations and gas piping. The teoretical part deals with design and implementation of retention tanks and infiltration facilities according to current technical regulations and their funcionability. Calculation and project part contain design of water installations, drainage, gas piping in building and their connection to present technical networks. Building is threefloor multifuctional house which has partial basement. Every floor differs in placing of sanitary rooms. Project was done according to current czech and europe regulations.
|
| |
|
Hotel
Šťastný, Miroslav ; Poláček, Lukáš (referee) ; Moudrý, Ivan (advisor)
The objective of the bachelor thesis is the design of the hotel in Libínské Sedlo, close to the city of Prachatice. Building is designed as four story, partly embedded in sloping terrain. Load bearing structures are primarily longitudinal walls. On the ground floor is placed reception, restaurant, kitchen, sanitary facilities for emloyees and technical rooms. On the other stories are rooms for hotel guests.
|
| |
|
Trigeneration in building complex Technicka 2
Sukup, Jan ; Fortelný, Zdeněk (referee) ; Pospíšil, Jiří (advisor)
This thesis deals with electricity, heat and cold production and describes ways of their simultaneous production – trigeneration. The main intention is to describe the ways of cooling the A1 building which is used by The Faculty of Mechanical Engineering. There is a Vapor compression cycle, a One stage absorption cycle and a Two stage compression cycle designed for cooling A1 building. This thesis includes suggestion for suitable commercial units for the purpose of cooling and a comparison of their running costs. An economic analysis is also included. Another part of the thesis is the design of a one stage absorption cycle connected to cogeneration units placed in The Faculty of Mechanical Engineering campus. The condenser of this cycle is also designed.
|
|
Za rámec běžného plánování podníkání: budování internetového startupu v rychlé ekonomice
Šimek, Vojtěch ; Krause, Josef (advisor) ; Vaněček, Michal (referee)
First part of the thesis compares available approaches on business planning, namely the traditional and newly emerged and proposes a Business Planning Approach Selection Framework that should help (newbie) entrepreneurs with orientation in the chaotic business planning world and choosing an approach suiting their specific needs. Conclusion of the theoretical part is that both the traditional and modern business plans have their role in todays business environment. While the old are great for external presentation and funds securing, the new enable to create more complex process for planning successful business from the original idea to and beyond their launch, building on customer feedback and gradual iterations. The practical part then builds on the theoretical research and aims to check feasibility of an actual business project, a multisided platform mediating sales of automotive financial products. It describes the model refinement and product creation process as well as eventually proves viability and feasibility of the whole business.
|
guest ::
