|
|
Determination of selected heavy metals in samples of great tits feathers by inductively coupled plasma mass spectrometry
Adamová, Simona ; Hraníček, Jakub (advisor) ; Kozlík, Petr (referee)
EN As a result of human activity, a number of polluting substances are released into the environment. Heavy metals are one of the types of these contaminants. Their accumulation in the environment can have a negative impact on living organisms, including humans. For this reason, environment quality monitoring has become an important activity. Great tit (Parus major) can be a suitable bioindicator of the level of environmental contamination by heavy metals, which is acceptable mainly due to its abundance and occurrence in the vicinity of human settlements. This diploma thesis deals with the determination of six selected heavy metals in feather samples of these songbirds from several parts of the Czech Republic and other European countries. High pressure microwave mineralization in the presence of acids was used to prepare the samples. Selected heavy metals were determined using inductively coupled plasma mass spectrometry (ICP-MS) technique, which is also suitable for ultratrace analysis due its very low limits of detection.
|
|
| |
|
|
Nickel alloys in aerospace
Šprincl, Jan ; Nopová, Klára (referee) ; Němec, Karel (advisor)
The aerospace industry is one of the fastest growing industries today. Increasing demands on the efficiency and fuel consumption of jet engines can be met, among other things, by using higher quality materials, which clearly include nickel-based superalloys, which can meet these demands. This work provides an overview of these materials: both the building block of the whole structure - nickel, superalloys in general, and especially those nickel-based. It deals with the composition of the microstructure formed by the austenitic matrix ( phases) most often cured by carbide or substitution precipitates, unique mechanical properties, but also the influence of high temperatures and creep on the degradation of these properties. The work also includes a comparison of selected superalloys from different perspectives, especially according to the type of particles that cure the matrix or the effect of loading on the superalloy in the presence of thermal oxidation environment. Depending on the area of application, these materials are predestined for further future development and improvement, because their unique properties in areas with extreme conditions are irreplaceable for the time being.
|
|
|
Study of the content of risk elements in soils and plant material
Vlčková, Renáta ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
This bachelor thesis deals with the study of the content of selected heavy metals (Zn, Ni, Fe, Mn) in soils and mushrooms. The flame atomic absorption spectrometry method was used to determine the heavy metal content. Fungi and soil samples were collected at 18 sites in the Jeseníky region. The concentrations of heavy metals in the mushrooms were in the range from 140–582 mg/kg Zn, 48–380 mg/kg Fe, 5–19 mg/kg Mn and 3–8 mg/kg Ni. Zinc had the highest concentration value in all mushroom species. In soils, the concentrations of heavy metals ranged from 10–72 g/kg Fe, 52–1,000 mg/kg Mn, 29–115 mg/kg Zn and 6–50 mg/kg Ni. Iron was the most abundant element in the soils. Mushrooms contamination was assessed as a health risk in the study area. However, the pollution of forest soils was assessed as satisfactory and thus the productive function of the soil is not impaired. The type of forest cover was found to have minimal effect on the chemical composition of the soils.
|
|
|
Distribution, binding and mobility of Ni in soil in the closed Ni mining area in the vicinity of Křemže
Pipková, Zuzana ; Ettler, Vojtěch (advisor) ; Vaněk, Aleš (referee)
Soils in the vicinity of Křemže in the Southern Bohemia are developed on altered ultrabasic rocks. The occurrence of Ni-hydrosilicate and Fe-rich ores in this area lead to their mining mainly during 19th century, then during the World War II. This thesis is focused on distribution and availability of Ni, Cr and Co and accompanying elements in soils at former mine and prospection sites (2 soil profiles and 32 topsoil samples at historical surface mine area). In all soil samples, physico-chemical parameters (pH, TOC, TS) and bulk concentrations of Al, Ca, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb and Zn were measured. In addition, deionised water, DTPA and EDTA extracts were used to determine the (bio)availability and mobility of these elements. Some of trace elements were found in elevated concentrations in the mining area topsoils; mean Ni: 1175 mg/kg (range 545-2849 mg/kg), mean Cr: 416 mg/kg (240-849 mg/kg), mean Co: 127 mg/kg (65-238 mg/kg), mean Fe: 49155 mg/kg (30460-113800 mg/kg), mean Mg: 12648 mg/kg (8795-18770 mg/kg) and mean Mn: 1480 mg/kg (1028-2319 mg/kg). In soil profiles the Ni availability decreased with depth. In the uppermost organic O horizon in forest soil profile, 19.5 % and 23.8 % of total Ni was extracted by DTPA and EDTA, respectively. The extractabilities are decreasing down to mineral...
|
|
|
Determination of zinc, cadmium and nickel in leaves by inductively coupled plasma-mass spectrometry
Plodík, Michal ; Hraníček, Jakub (advisor) ; Červený, Václav (referee)
Práce je zaměřena na stanovení těžkých kovů (zinku, kadmia a niklu) v listech různých druhů stromů. Vzorky byly odebrány z různých lokalit na území České republiky. Pro analýzu byla použita hmotnostní spektrometrie s indukčně vázaným plazmatem, která je dostatečně citlivá pro předpokládané nízké koncentrace vybraných kovů. Pro stanovení koncentrace byla klíčová příprava vzorků pro mikrovlnný rozklad v koncentrované kyselině dusičné. Naměřené koncentrace sledovaných kovů se lišily nejen mezi lokalitami a jednotlivými rostlinnými druhy, ale také v rámci jedné lokality. Použitá metoda ICP-MS prokázala dostatečnou citlivost i u prvků s přirozeně nízkou koncentrací v životním prostředí, což bylo v této práci kadmium.
|
|
|
Computational simulation of the compression test of the open cell metal foam
Homola, Václav ; Skalka, Petr (referee) ; Ševeček, Oldřich (advisor)
The thesis presents computational simulation of compression test of a nickel foam and the 3D reconstruction of micro-CT images was utilized to generate the foam’s model of geometry. Explicit FEM is used to simulate compression test using software tool LS-DYNA and the stress–deformation curve is obtained together with deformed model’s mesh used for subsequent analysis. Sensitivity analyses were performed to configure the model and ensure best fit with values obtained during real-life experiment. The ANSYS Classic environment was then used to simulate tensile test of the foam compressed to various thicknesses. The tensile moduli in three mutually perpendicular directions of nickel foam were computed and the results were compared to experimental values as well. The results of tensile test simulation revealed considerable anisotropy of the foam’s elastic behavior. It can be said that the measured experimental data correspond very well with the elastic properties obtained from simulation up to certain level of compression. Analysis of the relationship between the element size and tensile moduli showed a significant difference between fine and coarse mesh. The optimal level of discretization and the overall model configuration ensuring high level of accuracy is proposed in this thesis.
|
|
|
Nickel silicides layer by electron beam melting of electro deposited layer
Petr, Jiří ; Pantělejev, Libor (referee) ; Jan, Vít (advisor)
This master’s thesis deals with the possibility of creating a compact nickel-silicide layer on austenitic substrates. The theoretical part describes a variety of surface treatments, silicide division, and basic principles of electron beam. The experimental part contains a description of used experimental methods for evaluation of samples, creation of Ni-Si coating using electroplating, and the parameters of electron beam used for melting the sample coating. The last part is devoted to structural evaluation of the sample coating and its microhardness.
|
|
|
Leachability of Cu, Ni and Co from alkali-activated matrices
Janíčková, Vlasta ; Kalina, Lukáš (referee) ; Koplík, Jan (advisor)
The work deals with the determination and comparison of leaching of heavy metals from two types of alkali activated systems based on blast furnace slag and high-temperature fly ash. These systems are capable in their structure encapsulate heavy metals, toxic substances or radioactive substances, which can be harmful for the environment. The aim of this work is to prepare a mixture with acceptable mechanical properties. Leachibility from matrix was tested according to ČSN EN 12457–4, followed by analyses Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Structure of matrix was analysed using Scanning electron microscope (SEM).
|
|
|
Photochemical generation of volatile species of nickel for analytical atomic spectrometry methods
Šoukal, Jakub ; Musil, Stanislav (advisor) ; Kratzer, Jan (referee)
This thesis deals with optimization of conditions of photochemical generation of volatile species of nickel for atomic absorption spectrometry. The volatile species of nickel were generated in the flow arrangement, when sample was injected to a stream of a reaction medium. Either formic acid was used as the reaction medium or formic acid with the addition of formate anions. Two types of a generator were tested, a generator with a PTFE tube wrapped around a mercury UV lamp and a high efficiency generator with an inside channel. At the same time, two types of a gas-liquid separator were tested. Diffusion flame was used as an atomizer due to its high robustness. Quartz atomizer didn't provide higher sensitivity and measurements had worse repeatability. All the parameters affecting atomization in the diffusion flame were optimized (flow rates and composition of gases, observation height). In the next section, conditions of generation (irradiation time, HCOOH concentration, addition of formate anions) were optimized. Interferences of inorganic acids in photochemical generation were investigated as well. It was found out that the generator with the inside channel provided slightly higher sensitivity and thus generation efficiency than the generator with the PTFE tube wrapped around. Transmission of...
|
guest ::
