|
|
In-flight measurements of micro aerial vehicles
Málek, Ladislav ; Zikmund, Pavel (referee) ; Dvořák, Petr (advisor)
Bachelor thesis deals with flight measurements on selected unmanned platforms within the project Detection and monitoring of invasive spieces using unmanned aircraft. Firstly, the project itself and the platform used are presented. The theoretical part is devoted to methods of measuring flight performance. Finally, thesis contains used measurement methodology, processing and evaluating of data.
|
|
|
Design of light four-seater aircraft
Mikulášek, Miloš ; Vaněk, František (referee) ; Píštěk, Antonín (advisor)
This master‘s thesis is focused on the design of four-seat metal aircraft with low take-off weight in accordance with CS-23. Main dimensions of aircraft are designed, weight analysis, aerodynamic characteristics and flight performance are calculated in this thesis. In conclusion, the estimated costs of development and production are determined.
|
|
|
Flight performance analysis of the airplane VUT 081 KONDOR
Kerndl, Jindřich ; Daněk, Vladimír (referee) ; Zikmund, Pavel (advisor)
The aim of this diploma thesis is to analyse flight performance of airplane VUT-081 Kondor. The first part focuses on determination and estimation of aerodynamic characteristics of the airplane. Based on this data flight performance was calculated and evaluated according to CS-ELSA. The last part is dedicated to comparison of flight performance of VUT-081 Kondor with other similar airplanes.
|
|
| |
|
|
Design of VUT 051 RAY aircraft with hybrid power unit
Zeman, Petr ; Bencalík, Karol (referee) ; Píštěk, Antonín (advisor)
The master´s thesis deals with a design of hybrid power unit for a small aircraft. The Introductory part goes into the problems of hybrid power unit and describes its current use in aviation. In the next part of the thesis aircrafts VUT 051 RAY and Skyleader 600 are described and the aircraft with better aerodynamic characteristic is chosen. A suitable conception of hybrid power unit is proposed for this aircraft. On the basis of the proposed conception basic flight performance are figured out. After that a weight and blance analysis are made with the chosen power unit components and thair arrangement. In the final part electric motor mounting and a frame for holding batteries are designed.
|
|
|
Design of a aircraft for towing and basic acrobtics
Loutocký, Jiří ; Šošovička, Róbert (referee) ; Mališ, Michal (advisor)
This master thesis solves conceptual design of aerotow airplane and airplane for basic aerobatics. Airplane is designed by using of specification CS-23. The first part of the thesis solves conceptual design. Especially possible concepts and choice the best one according to requests. Next part deals with flight performance of aerotow airplane in normal flight and also in aerobatics. The third part is engaged in main flight performance in aerotow. 3D system model of whole aircraft and compact disk with mentioned 3D model and electronic version of thesis is also added.
|
|
|
Modification of RAPID 200 Aircraft for Towing
Seďa, Ondřej ; Daněk, Vladimír (referee) ; Píštěk, Antonín (advisor)
This master’s thesis deal with design modification of the RAPID 200 (Skyleader 200) airplane for towing at compliance with maximum take-off weight 450 kilogramme. A necessary construction modification, a weight analysis these adjustments and a balance verification are included. The thesis contains of power plants installation consisting from the M 132 engine and the V 541.2 propeller, a towing gear and a landing gear, a load calculation of power plants and towing gear and basic flight performance calculation too. Last but not least valuation of operation ekonomy, operation characteristics assesment and a using of the airplane for specialized duty are included.
|
|
|
Twin Engine Aaircraft Design for Commuter Category
Horák, Marek ; Jebáček, Ivo (referee) ; Juračka, Jaroslav (advisor)
This master’s thesis deal with design of EV-55 Outback airplane with pressurized cabin. In this thesis are given common principles and requirements of regulations on construction pressurized cabin. A necessary fuselage modifications and fuselage construction are included. Also construction and build up of air-conditioning system and emergency oxygen system are included. Some parts of this thesis are about weight and balance, definition of pressurized cabin load, simple stability analysis and basic flight performance calculation. At the end of this master’s thesis a result of weight and flight performances are compared with analogous airplanes by other producers.
|
|
|
Unmanned Aerial System design competition
Malinowski, Matěj ; Navrátil, Jan (referee) ; Pejchar, Jan (advisor)
Bakalářská práce se zabývá návrhem malého bezpilotního letounu určeného pro soutěž Air Cargo Challenge 2015. Práce je uspořádána dle postupu vývojových prací. Na prvotní koncepční návrh navazuje volba vhodného tvaru letounu a jeho profiláže. Následuje výpočet letových výkonů, maximální vzletové hmotnosti a centráže letounu. Poslední část práce se zabývá konstrukcí letounu a je provedena analýza závislosti užitečného zatížení na hustotě vzduchu.
|
|
|
Flight performance of racing RC gliders
Hájek, Tomáš ; Zikmund, Pavel (referee) ; Pejchar, Jan (advisor)
Bachelor thesis is about flight performance of category F3K, radio-controlled gliders. It has list of flight tasks performed during competition and characteristics of different flight modes. The paper presents important performance characteristics and the methodology for their measurement.
|
guest ::
