|
|
Charger for lead-acid accumulators 12V with the aditional fuction "start-car"
Benada, Tomáš ; Červinka, Dalibor (referee) ; Vorel, Pavel (advisor)
This thesis is engineering design of the intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR". It contains calculations of each component. The switching power supply is the mainstay of the charger that makes the charger small, lightweight and portable. The Intelligent CHARGER FOR LEAD-ACID ACCUMULATORS 12V WITH THE ADDITIONAL FUNCTION "START-CAR“ charges the accumulator by method of constant voltage with current limitation of 0,5A, 5A, 20A, 50A. 50A current is used in winter during starting of a car, when the battery can´t provide sufficient current. The device comprises safety protection for the charger, supply network and battery. There are three LEDs placed on the front side of the charger reflecting status of the device.
|
|
|
Position control of servo with discontinuouns rechangeable speed
Jindra, Pavel ; Věchet, Stanislav (referee) ; Němec, Zdeněk (advisor)
Diploma thesis work includes simulation of compensation of control for discrete. The aim of the work is a solution positioning control of servomotor drive piston, which is controlled by pass of the pressure oil with the help of several electromagnetically controlled switchboards with the orifice in the output channels. The verification activities of the regulated system is done using simulation in Matlab/Simulink and Matlab/Simulink, Matlab/Hydrosim. The requirement on the created model is to verify the behavior of the system to be modified to be used for the further development of the issue
|
|
|
Position control of servo with discontinuouns rechangeable speed
Jindra, Pavel ; Věchet, Stanislav (referee) ; Němec, Zdeněk (advisor)
Diploma thesis work includes simulation of compensation of control for discrete. The aim of the work is a solution positioning control of servomotor drive piston, which is controlled by pass of the pressure oil with the help of several electromagnetically controlled switchboards with the orifice in the output channels. The verification activities of the regulated system is done using simulation in Matlab/Simulink and Matlab/Simulink, Matlab/Hydrosim. The requirement on the created model is to verify the behavior of the system to be modified to be used for the further development of the issue
|
|
|
Relay output module for electronic tachograph
Feilhauer, Petr ; Sirka, Martin (referee) ; Zezulka, František (advisor)
This bachelor thesis contains detailed description of function and wiring current Electronic tachograph RE1xx from company UniControls-Tramex. For comparison there is mentioned description of competitor’s products from this branch. The part of this thesis is analysis of measurement actual speed on the train vehicles and analysis of imaging information to staff of vehicle. The base of this finding is making several projects about future way of development of this electronic tachograph. Main programmes of this thesis are design, implementation and verification functions of module relays outputs for Electronic tachograph RE1xx. Practically design must be satisfy with basic technical-law specifications, which refer of this branch for application this device. Thesis contains the description of single parts of scheme, control microcontroller, using of integrated circuits. Further thesis will contain theoretical calculations, design of main software and his implementation to the module. The aim of design and implementation of module relays outputs is evaluation reached outcomes from view technical solutions, functions and price statement of the module.
|
|
| |
|
|
Car-battery charger
Kadlec, Josef ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
This bachelor’s thesis is considered by projection and construction of the car battery charger with switching source. One-pulsed conducting changer is base of this charger. The charger is intended for accumulators of nominate voltage 6 and 12V. Accumulators are charged by method of constant voltage with current limitation of 0.5A, 5A, 20A and 50A. Value 50A has reason during stating of car for example in winter, because the charger helps to battery. The device is equipped with additional protection, which protects the charger and also the accumulator and the supply network. Three pilot lights are the next equipment of the device.
|
|
|
Switched resonant power supply
Štaud, Stanislav ; Vorel, Pavel (referee) ; Kratochvíl, Tomáš (advisor)
This thesis deals with desing of serial resonant converter with regulation output voltage in full bridge configuration like alternative power switching converter with pulse width modulation. The thesis includes analysis of serial resonant converter, desing power transformer, driving circuits. The thesis concludes with the functional converter and complete technical documentation.
|
|
|
The inverter for arc-welding
Vaculík, Josef ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
This diplom thesis theoretically deals about principle of pulse welding current source. Work explains operation principle of the single acting transmit converter used in realized construction and mention the others examples of converters types. Goal of the work is design individual parts of source : input filter, pulse transformer, output inductor and power semiconductors components. Thesis also contains description of the regulation circuitry of the converter, auxiliary power supply and pre-driver for power transistors. If everything will be all right prototype of the source will be assembled and measured. Results will be compared with theoretical assumptions.
|
|
|
The inverter based battery charger
Kadlec, Josef ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
The aim of this master’s thesis is provide detailed information about car battery’s charger with a switching power supply. The kind of this power supply is one-pulsed conducting inverter with transformer. The charger’s rates of nominal voltage are 6 and 12 V. The method of charging is charging by constantly voltage with a current limitation. The values of a current limitations are 0.5A, 5A and 20A. The charger’s maximal current is 50A. This current can help to the accumulator with starting of a vehicle. This device is equipped by indicators which indicate the end of charging.
|
|
|
A traction drive for an electric bike with motor "Heinzmann"
Němec, Petr ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This work deals with a proposal and construction of a DC/DC converter for a control of a DC motor Heinzmann. The DC/DC converter will be used in an electric drive for a bicycle. The proposal of the DC/DC converter is designed for such engine power to avoid fully any human force to drive - pedaling. The work includes informations about the used motor, progress of proposal and dimensioning of the converter - power circuit and control electronics.
|
guest ::
