National Repository of Grey Literature 24,884 records found  beginprevious21 - 30nextend  jump to record: Search took 0.73 seconds. 

Antioxidant, anti-proliferative and immunomodulatory effect of fruits, vegetables and mushrooms in vitro
Doskočil, Ivo ; Havlík, Jaroslav (advisor) ; Orsák, Matyáš (referee)
Recently there has been an increasing interest in discovering of new species of plants and mushrooms which have antioxidant or anti proliferative activity. The interest is caused by the fact that these species have medicinal and food utilization. These properties of plants and mushrooms can be used when dealing with many diseases which may be connected with oxidative stress (inflammatory bowel disease, cardiovascular disease, hypertension, and tumour disease, etc.). The thesis propounds characteristics of in vitro antioxidant and anti proliferative activity of 19 types of juices and 28 methanol extracts of fruits and vegetables, which are common parts of a diet. In the thesis there are also characteristics of 13 ethanol extracts of edible mushrooms of the order of Polypore (Popyporales). Antioxidant activity was quantifie by 2, 2 diphenyl 1 picrylhydrazyl (DPPH), oxygen radical absorbance capacity (ORAC), and inhibition of nitric oxide (NO) production. Cytotoxicity was measured by MTT (3 (4,5 dimethylthiazol 2 yl) 2,5 diphenyltetrazolium bromide. Immunomodulatory activity was determined by an assay of phagocytic activity of human neutrophil granulocytes. Further a total phenolic content (TPC) and total beta glucan content were investigated; these are considered to be the potentially active constituents participating in mentioned activities. From the obtained results it is evident that juices (TPC = 1603.2 mg GAE/L; ORAC = 438.5 umol TE/g) and a bilberry (Vaccinium myrtillus) fruit extract (ORAC 836.6 umol TE/g; DPPH = 404.6 umol TE/g) showed the highest antioxidant activity of all tested samples of fruits and vegetables. Capsicum (Capsicum L.) juices (TPC = 642.1 mg GAE/L; ORAC = 127.9 umol TE/g) and a radish (Raphanus sativus L.) extract (ORAC 724.5 umol TE/g; DPPH = 52.2 umol TE/g) also proved to have the high values of antioxidant activity. From the tested fruits and vegetables the following inhibited to produce a nitric oxide: onion (Allium cepa L) juices (lowered the NO production by 57%), tangerine juices (Citrus reticulata Blanco)(by 52%), broccoli (Brassica oleracea var. botrytis italic) extract (by 21%), and orange (Citrus sinensis Pers.) extract (by 10%). Concerning edible mushrooms, Lentinus tigrinus (Bull.) Fr. (TPC = 216.2 umol GAE/g of extract), Ganoderma lucidum (Curtis) P. Kras (TPC = 257.9 umol GAE/g of extract), and Royoporus badius (Pers.) A.B. De (TPC = 257.8 umol GAE/g of extract) presented the highest phenolic content. Sparassis crispa (Wulfen) Fr. (117.4 mg/g of extract) had the highest content of beta glucan. Substantial effect on phagocytic activity of granulocytes was noticed in connection with Neolentinus lepideus (Fr.) Redhead & Ginns, Polyporus squamosus (Huds.) Fr., and S. crispa. In connection with the latter of mentioned mushrooms, a moderate inhibitory effect towards HT 29 human colorectal adenocarcinoma cell line (IC50 = 107 ug/ml of extract) was noticed. The results indicate that the tested plants and mushrooms can be beneficial when reducing the negative effects of oxidative stress. The oxidative stress has been recognized as a contributing factor to a whole range of diseases and the reduction of the oxidative stress may lead to the decrease in the possibility of the diseases´ progression. The results show the possible favourable effects on the human health. When evaluating the results, the following fact should be taken into consideration; the in vitro tests and screenings are considered to be the first phase of systematic research of the effects and serve for the choice of respondents for further detailed studies.

The use of biomass ash
Ochecová, Pavla ; Tlustoš, Pavel (advisor) ; Radim, Radim (referee)
One of the most frequently used sources of renewable energy is biomass, mainly wood biomass. Incineration is the most common technology utilizing the energy from biomass to produce heat. A byproduct of these technologies is ash, whose composition depends on the feedstock composition and the incineration technologies. Due to the high content of valuable nutrients in ash, one of the suitable option for ash utilization seems to be application into agricultural or forestry land. Therefore, it is necessary to test response of soils and plants and look for the most suitable combination of soil additive (biomass ash), and plants. Experimental part of PhD thesis was divided into the incubation experiment and the vegetation pot experiments. The incubation experiment: The efficiency of ash addition at two application rates was tested for nutrients enrichment in different soils within period of 56 days. The vegetation pot experiments: The two plants Triticum aestivum L: (three-year experiment) and Lolium perenne L. (one-year experiment) were planted in the 5L pots. Soils were treated with ash or ash combinated by superphoshate and flue gas desulfurization gypsum. For both plants, we evaluated the plant growth, biomass production and content of macro, micro and toxic elements in the biomass and in the soils.

Comparison of the Views and Attitudes of Pupils at Secondary Vocational Schools in the Field of Substance Abuse
Mazánková, Michaela ; Jirsáková, Jitka (advisor) ; Miroslava, Miroslava (referee)
Bachelor thesis entitled Comparison of the views and attitudes of pupils at secondary vocational schools in the field of substance abuse deals with a comparison of opinions and attitudes of pupils at secondary schools and vocational schools Obchodní akademie a Hotelová škola Havlíčkův Brod. The first part is devoted to general characteristics of risky behavior, causes of its origin, different types and prevention of risk behaviors . Analytical part is devoted to evaluation of the questionnaire and the results are compared opinions and attitudes of students of graduation schools and vocational schools, and point to the simultaneous occurrence of risk behavior studied in high school. Based on data evaluation are at the end of the work proposed specific preventive measures specifically for students of graduation schools and vocational schools.

Cooperation of high schools with external contractors in preparing school educational programs
Tulach, David ; Lačev, Alek (advisor) ; Hochel, Matej (referee)
This thesis, Cooperation of high schools with external contractors in preparing school educational programs, deals with the question whether it would be possible and beneficial for high schools to cooperate with companies on the preparation or modification of their educational programs, with the goal of improving the quality of education. After initial contributions from experts who provided negative replies to this question, the view was focused on the root of the issue - what are the historical pillars of public schools and pedagogy, what does science say about learning and teaching, how pedagogy reacts to the crisis of science. After comparing literal sources and results from interview with the experts, in combination with a trace and activity analysis, a theory was established that public education is reaching a point of crisis, has not changed in its essence since its beginning and that the best solution might be the establishment of alternative educational institutions.

Predicting asp and pikeperch recruitment in a riverine redervoir.
BLABOLIL, Petr
Recruitment of two species, asp (Leuciscus aspius) and pikeperch (Sander lucioperca), in a riverine reservoir was studied using a novel statistical approach. Both species are piscivorous and are stocked into reservoirs for biomanipulative purposes to reduce planktivore species. Long-term data series were used, but the number of potential predictors was high. Therefore, a novel informative statistical approach based on dimension reduction methods was applied. Quality of outputs was driven by sampling methods. Main factors affecting asp recruitment were zooplankton abundance, predator density and temperature. In terms of pikeperch fry measured with seine and trawls, the number of predators was the only important factor. Gillnets underestimate small fish and the data were unsuitable for statistical modelling.

Single particle analysis of size-segregated aerosol in Prague city center
Marvanová, S. ; Skoupý, Radim ; Kulich, P. ; Bendl, J. ; Hovorka, J. ; Machala, M.
Particulate matter (PM) is omnipresent pollutant in the ambient air known to cause cardiovascular and respiratory diseases (WHO 2004). Recently, outdoor air pollution and particulate matter in outdoor air pollution were classified as carcinogenic to humans, Group 1 (IARC 2015). Especially, ambient PM of aerodynamic diameter < 100 nm, ultrafine particles, appears to be of great importance due to its high specific surface area and high number concentration (Hughes et al. 1998). Ultrafine particles also easily enter and are being transferred in organisms, and interact with cells and subcellular components (Oberdorster et al. 2005). As the evidence of ultrafine PM significance increased, size-fractionated PMs sampled by various cascade impactors have been employed into the toxicological studies on cell cultures or isolated cells, using the organic extracts of size-fractionated PMs (Topinka et al. 2013, Topinka et al. 2015) or directly the size-fractionated particles (Becker et al. 2003, Ramgolam et al. 2009, Reibman et al. 2002, Loxham et al. 2013, Jalava et al. 2006, Thomson et al. 2015, Jalava et al. 2015). The aim of this study was to evaluate shape and composition of size-segregated aerosol particles, sampled by high volume cascade impactor, using electron microscopy and energy dispersive X-ray spectroscopy (EDX).

Diamond coated AlGaN/GaN high electron mobility transistors - effect of deposition process on gate electrode
Vanko, G. ; Ižák, Tibor ; Babchenko, O. ; Kromka, Alexander
We studied the influence of the diamond deposition on the degradation of Schottky gate electrodes (i.e. Ir or IrO2) and on the electrical characteristics of AlGaN/GaN high electron mobility transistors (HEMTs). In present study, the diamond films were selectively deposited on the AlGaN/GaN circular HEMT by focused (ellispoidal cavity reactor) and linear antenna (surface wave) microwave plasma at different temperatures from 400°C to 1100°C. The preliminary results on electrical measurements on the diamond-coated c-HEMTs showed degraded electrical properties comparing to c-HEMTs before deposition process, which was attributed to degradation of the Ir gate electrodes even at temperatures as low as 400°C. On the other hand, metal oxide gate electrode layer (IrO2) can withstand diamond CVD process even at high temperatures (~900°C) which make it suitable for fabrication of all-in-diamond c-HEMT devices for high-power applications.

Frequency stabilized semiconductor laser source for high-resolution interferometry
Řeřucha, Šimon ; Hucl, Václav ; Holá, Miroslava ; Čížek, Martin ; Pham, Minh Tuan ; Pravdová, Lenka ; Lazar, Josef ; Číp, Ondřej
We have assembled an experimental iodine stabilized Distributed Bragg Reflector (DBR) diode based laser system lasing at a wavelength that is in a close proximity to the wavelength of a stabilized He-Ne lasers traditionally used for metrological applications (λ=632.9 nm in vacuum). The aim was to verify whether such a system could be used as an alternative to the He-Ne laser while yielding wider optical frequency tuning range, higher output power and high frequency modulation capability. We have measured the basic characteristics of the laser source and then we have compared the performance of the laser system with that of a traditional frequency stabilized He-Ne laser with a series of experimental arrangements similar to those usually found in laser interferometry and displacement metrology applications. The results indicate that DBR diode laser system provides a good laser source for applications in dimensional (nano)metrology since it provides more output power and advanced tunability options than stabilized He-Ne lasers while maintaining fundamental requirements such as the frequency stability, coherence length and also a defined traceability.\n\n

Optical low dispersion rezonator as length sensor using optical frequency comb
Pravdová, Lenka ; Hucl, Václav ; Lešundák, Adam ; Lazar, Josef ; Číp, Ondřej
Ultra-high precis measurements are domain of lasers interferometers. An optical resonator measuring method using broad spectrum of radiation of an optical frequency comb was designed and experimentally verified at our workplace. The measuring of a quantity – a distance of resonator mirrors – is provided by its conversion to the value of repetition frequency of the pulse laser with mode-locked optical frequency comb. In this paper the comparison of the absolute scale of the optical resonator with an incremental interferometer scale is introduced. The incremental interferometer is implemented for verification of the optical resonator scale. The double beam incremental interferometer is operating at the wavelength of 633 nm and the measuring mirror with piezo actuator is used as one of its reflectors. It turns out that the major error signal is the reflection of the periodic nonlinearity of the incremental resonator scale. The relative resolution of our method reaches values up to 10-9 while maintaining measuring scale.

Detection of frequency noise properties of diode laser working on 729 nm
Pham, Minh Tuan ; Čížek, Martin ; Hucl, Václav ; Lazar, Josef ; Hrabina, Jan ; Řeřucha, Šimon ; Lešundák, Adam ; Číp, Ondřej
Paper report on the frequency noise investigation of the Extended Cavity Diode Laser (ECDL), working at 729 nm. The ECDL will be used as an excitation laser for the forbidden transition in a trapped and laser cooled 40Ca+ ion. For that an Hz of sub-Hz level linewidth is required. We present the experimental design for linewidth narrowing and frequency noise analysis. The linewidth is first narrowed with a phase lock loop of the ECDL onto a selected component of an optical frequency comb where the frequency noise was suppressed with a fast electronic servo-loop controller that drives the laser injection current with a high bandwidth.\n