|
Renewable energy legislation
Kučerová, Veronika ; Štěpánek, Petr (advisor) ; Černý, Pavel (referee)
This master thesis discusses current legislation in the field of supported and renewable energy sources. At the beginning of the thesis are defined renewable energy sources from the perspective of Czech legislation and of professional view. The second part is focused on legislation regarding renewable energy sources in the European Union and the Czech Republic. Follows an overview of the support tools and legislation regarding renewable energy sources in other member states of the European Union and the current status of the set objectives related to the share of energy from renewable sources in gross final energy consumption, which have been established by Directive 2009/28/EC. At the end is summary, along with an overview of the most successful and least successful countries in terms of achieving the objective.
|
|
Optimalization of material flow in automotive industry
Kolář, Tomáš ; Jirsák, Petr (advisor) ; Vinš, Marek (referee)
This master thesis is focussed on optimalization of material flow in an automotive company. First part introduce theoretical background. Automotive industry and its actual trends on global markets. Follows short introduction of the company where project of this thesis was executed. Main theoretical part describes concept of lean management, its tools in practical examples, but it is also focussed on philosophical approach to the work and mindset of the company. Follows the aplication part based on theoretical background. The whole project of this master thesis is focussed on specific area called PC store. At first this area is showed in context of overall material flow. Shortly there are introduced processes and areas where full material packaging flows. Follows deeper analysis and optimalization of PC store itself. There are three approaches of stock and lead time reduction applied. Last part shows the comparison of initial and future state including performed changes.
|
|
Výběr a implementace open source nástroje pro řízení portfolia projektů
Marek, Jan ; Chlapek, Dušan (advisor) ; Kučera, Jan (referee)
Methods and ways of implementation of changes and innovations in companies through project management are in today's society very well established. There exists methodologies, techniques and tools for the management of individual projects. However in a role of project manager, I very often faced the fact that companies are performing the project portfolio management in very intuitive way. This in itself leads to failed and prematurely terminated projects, initiation of the wrong projects or realisation of correct projects, but at the wrong time. Very often I have also recognized, that there is lack of awareness of fact, that there are also Open Source applications that can help with the organization's portfolio. This thesis deals with the definition of requirements, search and selection of proper OSS application and subsequent implementation. In the first part of this thesis I prepare a theoretical framework about PPM, and on that basis then identify and verify a set of requirements for selection of right OSS PPM application. The next section of thesis describes searching for suitable applications from a variety of sources, assessment against the requirements and the final selection. In the last part the implementation project is drafted, which aims to serve other colleagues in project management as one of the possible implementation paths. The outputs are then continuously confronted with experts in matter of projects and project management in the field of IT in order to maximize symbiosis between theory and real life experiences. Virtually every project management methodology defines the collection of already-proven techniques, best practices or lessons learned from the previous similar implementations. The main contribution of this thesis I see in fact that it contains not only the design of the project implementation, but also describes a logical path, what leads to the result. Therefore this thesis could be used as a base or discussed best practice, when a project of implementation of PPM application in place.
|
|
Developing open approach to mathematics in future primary school teachers
Samková, L. ; Tichá, Marie
In our contribution we focus on the possibility to develop open approach to mathematics in future primary school teachers during a university course on mathematics conducted in inquiry-based manner. We analyse data obtained in the beginning and in the end of the course with respect to two main aspects related to open approach to mathematics: searching for all solutions of a task, and acceptance of different forms of notation of a given solution. Data analysis revealed in the participants three different shifts towards open approach to mathematics, and showed that after the active participation in the course each of the participants improved at least in one of the monitored aspects, and that none of the participants got worse in any of the aspects.
|
|
A Comparison of Preconditioning Methods for Saddle Point Problems with an Application to Porous Media Flow Problems
Axelsson, Owe ; Blaheta, Radim ; Hasal, Martin
The paper overviews and compares some block preconditioners for the solution of saddle point systems, especially systems arising from the Brinkman model of porous media flow. The considered preconditioners involve different Schur complements as inverse free Schur complement in HSS (Hermitian - Skew Hermitian Splitting preconditioner), Schur complement to the velocity matrix and finally Schur complement to a regularization block in the augmented matrix preconditioner. The inverses appearing in most of the considered Schur complements are approximated by simple sparse approximation techniques as element-by-element and Frobenius norm minimization approaches. A special interest is devoted to problems involving various Darcy, Stokes and Brinkman flow regions, the efficiency of preconditioners in this case is demonstrated by some numerical experiments.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
|
Geodiversity values as a basis for geosite and geomorphosite assessment: a case study from Žďárské vrchy Highland
Bajer, A. ; Kirchner, Karel ; Kubalíková, L.
Paper presents geodiversity values, geodiversity is understood as a set of geological, geomorphological and pedological components, including systems consisting of this components and geological, geomorphological and pedological processes. Geodiversity values are analyzed in relation to ecosystem values (e.g. cultural, functional value). Geodiversity values were used as basis for a methodical approach to geosite and geomorphosite assessment. Methodological approach is presented at selected sites in the top part of the Žďárské vrchy Highland. The acquired results can serve as a basis for geoconservation of PLA Žďárské vrchy, development of geotourism as well as an offer for extension geoeducational activities.\n
|
|
Modelling, parameter estimation, optimisation and control of transport and reaction processes in bioreactors.
ŠTUMBAUER, Václav
With the significant potential of microalgae as a major biofuel source of the future, a considerable scientific attention is attracted towards the field of biotechnology and bioprocess engineering. Nevertheless the current photobioreactor (PBR) design methods are still too empirical. With this work I would like to promote the idea of designing a production system, such as a PBR, completely \emph{in silico}, thus allowing for the in silico optimization and optimal control determination. The thesis deals with the PBR modeling and simulation. It addresses two crucial issues in the current state-of-the-art PBR modeling. The first issue relevant to the deficiency of the currently available models - the incorrect or insufficient treatment of either the transport process modeling, the reaction modeling or the coupling between these two models. A correct treatment of both the transport and the reaction phenomena is proposed in the thesis - in the form of a unified modeling framework consisting of three interconnected parts - (i) the state system, (ii) the fluid-dynamic model and (iii) optimal control determination. The proposed model structure allows prediction of the PBR performance with respect to the modelled PBR size, geometry, operating conditions or a particular microalgae strain. The proposed unified modeling approach is applied to the case of the Couette-Taylor photobioreactor (CTBR) where it is used for the optimal control solution. The PBR represents a complex multiscale problem and especially in the case of the production scale systems, the associated computational costs are paramount. This is the second crucial issue addressed in the thesis. With respect to the computational complexity, the fluid dynamics simulation is the most costly part of the PBR simulation. To model the fluid flow with the classical CFD (Computational Fluid Dynamics) methods inside a production scale PBR leads to an enormous grid size. This usually requires a parallel implementation of the solver but in the parallelization of the classical methods lies another relevant issue - that of the amount of data the individual nodes must interchange with each other. The thesis addresses the performance relevant issues by proposing and evaluation alternative approaches to the fluid flow simulation. These approaches are more suitable to the parallel implementation than the classical methods because of their rather local character in comparison to the classical methods - namely the Lattice Boltzmann Method (LBM) for fluid flow, which is the primary focus of the thesis in this regard and alternatively also the discrete random walk based method (DRW). As the outcome of the thesis I have developed and validated a new Lagrangian general modeling approach to the transport and reaction processes in PBR - a framework based on the Lattice Boltzmann method (LBM) and the model of the Photosynthetic Factory (PSF) that models correctly the transport and reaction processes and their coupling. Further I have implemented a software prototype based on the proposed modeling approach and validated this prototype on the case of the Coutte-Taylor PBR. I have also demonstrated that the modeling approach has a significant potential from the computational costs point of view by implementing and validating the software prototype on the parallel architecture of CUDA (Compute Unified Device Architecture). The current parallel implementation is approximately 20 times faster than the unparallized one and decreases thus significantly the iteration cycle of the PBR design process.
|
|
San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper.
He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works.
My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful.
As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper.
xxxxxxxxxx
Thesis Statement
My thesis can be useful for everybody who is interested in Burmese contemporary art field.
This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues.
Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in.
xxxxxxxxxx
|
| |
guest ::
