National Repository of Grey Literature 29 records found  beginprevious21 - 29  jump to record: Search took 0.01 seconds. 
Calculation of induction machine stray looses
Jirásek, Tomáš ; Kurfűrst, Jiří (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle additional losses in an electric rotary machines and a calculation of these losses for induction machine. The additional losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage.
Verification of thermal-insulation properties of the foil materials
Šot, Petr ; TROJAN,, Karel (referee) ; Šťastník, Stanislav (advisor)
The master´s thesis deals with verification of thermal insulating property of thermoreflection foil insulations. The teoretical part of thesis focuses on the energy demand of buildings, the problems of heat transfer material, terms required for study of thermoreflection thermal insulation and experimental methods for determination of thermal insulating properties of insulators. In the next part the chapter is accompanied by an overview of the most common insulation materials which used in construction. The last part of teoretical part is devoted to the description of thermoreflect formation and analysis of the spread of thermal insulating layers of thermoreflection thermal insulation. The first part of thesis is devoted to the use of thermoreflection therm insulation in buildings. The second part of thesis is devoted to the design, assembly and calibration of the measuring device that uses a method of protected warm chamber. It is declared as a binding method of detection of the heat transfer performance of thermoreflection thermal insulation. The developed measuring device allows detection of endpoints in some direction of propagation of heat. Measurment of heat transfer coefficient devoted the third part of practical part. This part contains a description of the samples used for the measurement of the heat transfer coefficient. In the fourth chapter of the practical part are presented the results of the heat transfer coefficient measurments on selected samples of thermoreflection foil insulation. It is shown the characteristic of heat transfer coefficient of individual samples, the dependence of the heat transfer coefficient on the position of the sample in the measuring device and the recommendation of an appropriate use of sample in the works for the climatic conditions of the Czech republic. The work concludes the chapter of comparing and evaluating of all samples with practical recommendations.
Development of a new self-supporting insulation system with respect to dynamic stress
Machala, David ; Frajt, Daniel (referee) ; Drochytka, Rostislav (advisor)
This diploma thesis deals with suggestion of self-supporting insulating system that can be used for objects which insulating is more or less complicated. In this thesis are theoretically processed information about insulation systems while focus is on their structure, composition and principle of operation. Further, there is theoretically designed self-supporting insulating system which is practically built after theoretically composed testing for finding its basic properties. The most appropriate process of realization is formulated at the end after evaluation of the individual tests.
The influence of eccentricity upon the radial forces in an induction motor
Formánek, Jakub ; Hájek, Vítězslav (referee) ; Janda, Marcel (advisor)
The aim of this master thesis is to get familiar with the influence of radial forces in the induction machine. Induction motor is one of the most commonly used and most extended type of machine, therefore it is useful to detect the intensity of theese forces and their influence at operation of the machine. In this work ,radial forces are computed by the software simulation in ANSYS Maxwell. Models are created with help of module Rmxprt and finite elements method.These models are based on real induction motors with predefined size of eccentricity. In the final part we perform a measurement of deviations on the real machine using vibrometer.
Electromagnetic damper
Mikyska, Jan ; Huzlík, Rostislav (referee) ; Ondrůšek, Čestmír (advisor)
This master´s thesis is focused on obtaining electrical energy from vibration control car using electromagnetic dampers. The primary use of the electromagnetic damper is the production of electrical energy, which can then be used to power electrical appliances in your car or battery charging. The thesis is divided into six main parts: a literature review of possible ways of getting electricity from the car damping, theoretical and mathematical analysis of problems, the choice of design with computational analysis of dampers and power calculation.
Modeling of flow on synchronous generator
Chlup, Jaroslav ; Skalka, Miroslav (referee) ; Janda, Marcel (advisor)
This project deals with simulation´s possibilities of air flow in electric machines. A finite element method is the final element technique. Aim of this project is conversion universal formula for calculation friction dissipation factor. For its location is necessary to create 27 simulations according to the 2. plan order. Usage programme MATLAB for processing results obtain requisite algorithm for calculation friction dissipation factor.
Building technological study of execute peripheral walls in administration building of company Geostav in Otrokovice
Vyoral, Martin ; Novotný, Michal (referee) ; Diaz, Yvetta (advisor)
In this work is done building technological phase the installation for curtain wall office building fy GEOSTAV in Otrokovice. It contains a comprehensive section for the realization of this stage. It is therefore all about making ventilated facades. Stage design and building technology envelope in the thesis contains the technological steps for the following parts: building equipment, technological regulation for facade scaffolding and ventilated façade, schedule, mechanical assembly, inspection and test plan, safety.
Administrative building Brno Hlinky, implementation of facade and roof cladding
Dušková, Lucie ; Liška, Pavel (referee) ; Kovářová, Barbora (advisor)
The subject of this Bachelor thesis is offering solution of technological steps roofing and cladding of an office building in Brno, Hlinky. It is a two storey building, partial basement, the overall module dimensions 9.4 x 37.5 m. Main supporting skeleton consists of roof trusses and ceiling beams that are attached to poles. The roof is purlin, load-bearing layer is trapezoidal sheet, which is on the top flange purlins. The walls are self-supporting, walled. Roof cladding is insulated with layer of polystyrene, the main waterproofing layer is mPVC film. Most of the cladding is designed as external thermal insulation composite systems with ceramic tiles, part of the facade on the west side of the building is made up of wood paneling with an air gap.
Study efficiency of modern thermal insulation for buildings
Šot, Petr ; auditor, Karel Trojan, Brno, energetický (referee) ; Šťastník, Stanislav (advisor)
The bachelor´s thesis deals with the problem of thermoreflect insulation. The small part of thesis focuses on the energy demand of buildings and its problems. Then the greater extent is analysed problems by heat transfer of material. It includes effects arising from the individual methods of heat transfer and defines the level of expression of individual methods of heat transfer in materials. The thesis presents an overview of experimental methods for determining thermal insulating properties of insulators. Then there is shown a selection of the most widespread insulation materials used in today´s construction. It includes the division of insulators in terms of used materials and subsequent classification of the most used materials in these groups. Another part of thesis deals with the thermoreflect isolation. There are mentioned the necessary concepts for the study of thermoreflect thermal insulation, which include the emissivity surface, the coefficient of mutual radiation and translucency of the material. Then there is described the method heat transfer of thermoreflect isolation. On the next there are presented experimental methods of determining thermal insulating properties thermoreflect thermal-insulating material. The thesis also includes a practical part, which contains the measurement results on a small range of samples taken termoreflection insulators. In the end there is mentioned a brief realization of thermoreflection thermal insulation materials in buildings.

National Repository of Grey Literature : 29 records found   beginprevious21 - 29  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.