|
|
Integral frame bridge
Dobeš, Marek ; Šopík,, Leonard (referee) ; Koláček, Jan (advisor)
The aim of this diploma thesis is the design and assessment of a single span inclined integrated frame bridge structure over rail tracks. Three preliminary studies have been designed and then a best variant was selected for more detailed analysis. A reinforced concrete slab with steel girders with a span of 28.39 meters was developed. The model was developed using the MIDAS/Civil program and the limit state assessment was carried out using the MS Excel program. The procedure and dimensioning of the calculation is carried out according to valid standards and regulations.
|
|
|
Box girder bridge
Vostal, Lukáš ; Pecha, Jakub (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design of a prestressed box girder construction with several spans. Two variants are designed and for detailed solving was chosen the variant of the box girder. The length of loadbearing structure is 212 m, the longest span has 60 m. The calculation of load effects is done by software Scia Engineer 19.1. Drawing part is done by software Allplan Engineering 2021. The thesis includes drawings, representation of the construction proces, visualization and a structural design. Designing and assessments were made according to currently valid European standarts.
|
|
|
Electronics and CNC milling machine control
Tmej, Tomáš ; Zuth, Daniel (referee) ; Marada, Tomáš (advisor)
The diploma thesis focuses on the electronics design of a hobby CNC milling machine. There are analysed and described the individual electronic parts and components related to this problematic. Three electronics suggestions are made, these suggestions are compared. Then, one of these variants is selected and implemented. Next, is created a relevant PLC program to control the CNC milling machine with visualization for easy control.
|
|
|
Creation of Documentation for construction with design of control and visualisation for luxury house
Doležal, Petr ; Klaban, Jaromír (referee) ; Bátora, Branislav (advisor)
The thesis deals with an intelligent wiring including a control and visualization design for a family house. The goal of the thesis is to create a project of a high and a low voltage wiring for a family house including a design of an intelligent wiring. The thesis introduction describes an intelligent wiring and a comparison with a classic wiring. The next two chapters deal with the most used systems and a detailed description of the selected system Foxtrot. The chapter number 5 addresses the project documentation creation for a high and a low voltage wiring. A performance calculation of a heat pump used for heating is described in the following chapter. The functional program for control and visualization of heating, lighting, shading and security is described at the end of the thesis.
|
|
|
Bridge on the I/44 road
Majer, David ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The subject of this thesis is the design and analysis of five-span bridge construction across the railway on the route Zábřeh - Šumperk and the Morava river. There will be made separated bridge for each direction, only right bridge is considered in the thesis. Object is located to 1st class road I/44 on the route between Mohelnice and Jeseník. Three variants were designed - two prestressed chamber girders, one prestressed chamber girder with prefabricated consoles and construction of concrete slab mixed with two steel girders. After these variants were weigh up and the first one, with the length of cantilevered construction 235,6 m and maximum lenght of span 60 m, was chosen for analysis. Calculation of load effects was made by software Scia Engineering 2013 and the analysis was made according to current standards by manual calculation depending on limit states and their influence on the design as well. Drawing documentation and visualization are also part of the thesis.
|
|
|
Bridge on the II/379 road
Kubíček, Ondřej ; Šustr, Bronislav (referee) ; Panáček, Josef (advisor)
The master´s thesis deals with a new road bridge on the road II/379. There are three possible variants in preliminary design but only the option of connected girder slab beam of four fields was selected. This variant was assessed by static calculation in accordance with European standards. Other important parts of this thesis are also drawings, construction progress, visualisation and technical report.
|
|
|
Cryptocurrencies Blockchain Analysis
Očenáš, Martin ; Grégr, Matěj (referee) ; Veselý, Vladimír (advisor)
This thesis describes important existing cryptocurrencies and their basis principles. Especially it describes differences between this cryptocurrencies and theid basis principles. Also describes posibilites for analysis of Bitcoin blockchain. Next part describes improvments of tool for blockchain analysis. Futher it describes cryptocurrency analyzing tool, and it's implemented extensions.
|
|
|
Inovation of drill model design and control
Czipszer, Jiří ; Pásek, Jan (referee) ; Kaczmarczyk, Václav (advisor)
The objective of this bachelor thesis was to make hardware innovation laboratory task Driller subject Programmable Automation Controllers Technical University in Brno. Innovation of task assignment, for its subsequent implementation into laboratory scripts. For this assignment, create sample programs in the languages used in this subject, protocols suitable for submission and subsequent demonstration to students, as well as visualization.
|
|
| |
|
|
Slab bridge in the Litovel town
Majer, David ; Svoboda, Adam (referee) ; Panáček, Josef (advisor)
The subject of this bachelor’s thesis is the design and analysis of perpendicular, one-span bridge construction across the millrace for electrical power station in the Litovel town. Object is located to 2nd class road II/449. Three variants were designed - prestressed trapezoidal slab, prestressed double-beam construction and construction of four prestressed girders of shape I. After these variants were weigh up and the first one, with the length of cantilevered construction 22,5 m, was chosen for analysis. Calculation of load effects was made by software Scia Engineering 2013, it was compared to a manual calculation and the analysis was made by manual calculation according to current standards.
|
guest ::
