|
|
Creation of Documentation for construction with design of control and visualisation for luxury house
Doležal, Petr ; Klaban, Jaromír (referee) ; Bátora, Branislav (advisor)
The thesis deals with an intelligent wiring including a control and visualization design for a family house. The goal of the thesis is to create a project of a high and a low voltage wiring for a family house including a design of an intelligent wiring. The thesis introduction describes an intelligent wiring and a comparison with a classic wiring. The next two chapters deal with the most used systems and a detailed description of the selected system Foxtrot. The chapter number 5 addresses the project documentation creation for a high and a low voltage wiring. A performance calculation of a heat pump used for heating is described in the following chapter. The functional program for control and visualization of heating, lighting, shading and security is described at the end of the thesis.
|
|
|
Bridge on the I/44 road
Majer, David ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
The subject of this thesis is the design and analysis of five-span bridge construction across the railway on the route Zábřeh - Šumperk and the Morava river. There will be made separated bridge for each direction, only right bridge is considered in the thesis. Object is located to 1st class road I/44 on the route between Mohelnice and Jeseník. Three variants were designed - two prestressed chamber girders, one prestressed chamber girder with prefabricated consoles and construction of concrete slab mixed with two steel girders. After these variants were weigh up and the first one, with the length of cantilevered construction 235,6 m and maximum lenght of span 60 m, was chosen for analysis. Calculation of load effects was made by software Scia Engineering 2013 and the analysis was made according to current standards by manual calculation depending on limit states and their influence on the design as well. Drawing documentation and visualization are also part of the thesis.
|
|
|
Inovation of drill model design and control
Czipszer, Jiří ; Pásek, Jan (referee) ; Kaczmarczyk, Václav (advisor)
The objective of this bachelor thesis was to make hardware innovation laboratory task Driller subject Programmable Automation Controllers Technical University in Brno. Innovation of task assignment, for its subsequent implementation into laboratory scripts. For this assignment, create sample programs in the languages used in this subject, protocols suitable for submission and subsequent demonstration to students, as well as visualization.
|
|
| |
|
|
Slab bridge in the Litovel town
Majer, David ; Svoboda, Adam (referee) ; Panáček, Josef (advisor)
The subject of this bachelor’s thesis is the design and analysis of perpendicular, one-span bridge construction across the millrace for electrical power station in the Litovel town. Object is located to 2nd class road II/449. Three variants were designed - prestressed trapezoidal slab, prestressed double-beam construction and construction of four prestressed girders of shape I. After these variants were weigh up and the first one, with the length of cantilevered construction 22,5 m, was chosen for analysis. Calculation of load effects was made by software Scia Engineering 2013, it was compared to a manual calculation and the analysis was made by manual calculation according to current standards.
|
|
|
Residential Complex in Brno - Komín
Horáčková, Markéta ; Joura, Ivo (referee) ; Mikulášek, David (advisor)
The study of residential complex at Pastviny street in Brno-Komín is going to be a landscape for living. It is situated at periphery of a city which contain urban and country character of living. Designed are terraced houses, apartment buildings and villas. In study are fully used the cardinal points orientation and terrain configuration. There is also designed a new one way communication function class "D", subclass "D1" which is going through the area.
|
|
|
Biomedical data visualization using Matlab
Zvončák, Vojtěch ; Mekyska, Jiří (referee) ; Galáž, Zoltán (advisor)
The thesis deals with the visualization of biomedical data in MATLAB environment. The thesis contains following statistical methods and their descriptions: P-P plot, Q-Q plot, histogram, box plot, kernel denstity estimation, scatter plot and several time series metrics. Some functions are programmed from buil-in functions of MATLAB and others using external functions, which are changed to fit to this thesis’s purpose. First part of the thesis conserns theoretical background, whereas the second part conserns practical programmed realizations of mentioned functions. The program contains a graphical user interface - GUI, which the thesis describes in detail. The purpose of the GUI is to ensure ease of use and also data processing. The output graphs of GUI are shown in chapter 5. The last part deals with the possible extensions of the program.
|
|
| |
|
|
Software Support for Risk Analysis
Psota, Michal ; Štěpánková, Vladěna (referee) ; Kreslíková, Jitka (advisor)
This thesis focuses on the theoretical description of risk management options related to information technologies and describes methods used to risk analysis. Described methods are fault tree analysis, event tree analysis, FMEA, HAZOP and Markovov analysis. Practical part includes proposal and implementation of program that visualizes decision trees and determines probability of each tree item.
|
|
|
Principles of transmission of optical beam by optical fiber
Lásko, Jan ; Rampl, Ivan (referee) ; Šporik, Jan (advisor)
The work is focused on spreading beam optical fiber parameters which may affect the passage of the beam fiber dispersion, attenuation, numerical aperture and mods. In sub-sections there are examples which solve the problems and also practical examples of visualization of numerical aperture, the chromatic, and polarization dispersion. The basic features of the new technology of fiber called microstructure and problems connected with it are described on the paper.
|
guest ::
