|
Single-purpose machine for mounting of thermostat
Hajda, Jan ; Nohál, Libor (referee) ; Brandejs, Jan (advisor)
The aim of the bachelor's thesis is to design a single-purpose machine for completion the thermostat into combustion engine of a vehicle. First of all, it is necessary to design a conceptual solution that is able to lay down the thermostat in the shortest possible time, will not conflict with construction restrictions, the installation dimensions, and last but not least, the machine will be ergonomic and user-friendly. The subsequently selected variant will be designed and based on the drawing documentation will be produced a single-purpose machine, which will operate in three-shift work.
|
|
Alternative control SW for dedicated thermal performance chambers with customized UI
Žlebek, Jan ; Veselý, Libor (referee) ; Václavek, Pavel (advisor)
This thesis is oriented on simulating thermal chambers, their SW and HW and improving SW to meet specifications. Testing problematics connected with this thesis is briefly mentioned also. Thermal chambers used here are dedicated to run simulating test procedures for thermostats and similar devices designed to sense temperature and regulate it. Design and realisation of new SW are clarified in latter chapters of this thesis, as well as evaluating functionality and resulting dynamics and accuracy.
|
|
User interface emulator of thermoregulator
Viták, Jan ; Šír, Michal (referee) ; Bradáč, Zdeněk (advisor)
The aim of this bachelor thesis User Interface Emulator of Thermoregulator is to design a concept of the emulator and to implement the emulator including the software. The thesis includes description of the thermostat and the particular sensors emulated, the designed concept of the system, description of the designed circuitry and the description of the embedded software and the control software for PC. The design of circuit diagram of the emulator and the design of printed circuit board are in the attachment of this thesis.
|
|
Room Temperature Controller
Hruškovský, Antonín ; Tříska, Vít (referee) ; Mičulka, Lukáš (advisor)
This bachelor thesis deals with a production of a room thermostat for regulation of temperature in a house or flat. The text describes several types of sensors for measuring temperature according to various physical principles. Afterwards, one of the types of sensors has been selected and used in a measuring unit. Subsequently, a hardware design of the thermostat has been described, including the creation of the PCB design on a computer, component selection and the thermostat production itself. This is followed by the description of algorithms implemented on the microcontroller MSP430 to ensure the proper functioning the thermostat. A software has been installed into the side of the computer used to communicate with the thermostat. The communication with the thermostat has been realized by means of an USB bus.
|
|
Microprocesor based thermostat II
Paděra, Zdeněk ; Fiedler, Petr (referee) ; Zezulka, František (advisor)
Minor thesis is focused on ideological proposal of microcomputer orientated room thermostat, which is used for regulation of room temperature. The thesis concerns total proposal of characteristics and functions of room thermostat, concept of technical implementation and electronic scheme. The thermostat satisfies all the room thermostat requirements and eliminates disadvantages of marketed thermostats. Then algorithms of temperature control was proposed and comparison of these algorithms was realized on thermodynamic model of building. One of these algorithms was tested by the implementation on RABBIT 2000TM TCP/IP DEVELOPMENT KIT. At the close assessment of functionality of the realized algorithm was realized and selection of optimal algorithm for proposed room thermostat followed.
|
|
Precise measurement of semiconductors
Smělík, Martin ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
The aim of this bachelor´s thesis was design a laboratory workplace for precise measurement of the stability output parameters of semiconductors. The thermostat is also part of this workplace. The thermostat is maintaining a constant temperature measured semiconductor. The entire laboratory preparation is controlled by a computer via USB. The program is created in control environment Agilent VEE for automatic measurement that semiconductor components.
|
|
Microcontroler oriented thermostat
Valíček, Josef ; Hynčica, Ondřej (referee) ; Zezulka, František (advisor)
The aim of the bachelor’s thesis is to design and develop a microcontroller based room thermostat, suitable for controlling the temperature in houses or flats. The proposal of the thermostat takes into consideration the requirements put on today's marketed thermostats and the regulation of house temperature. The result is a detailed circuit blueprint, suitable for assembling the thermostat device. The work is mainly focused on the design of advanced algorithms applicable for the room temperature regulation and comparison of these algorithms based on the room thermodynamic model. The selected algorithm was implemented in the Rabbit2000TM microprocessor development kit and its performance was subsequently verified at the real object. Finally, the thesis gives an evaluation of the results and suggests the most suitable algorithm for the designed thermostat.
|
|
Remotely controlled thermostat
Závodný, Vilém ; Hanák, Pavel (referee) ; Šteffan, Pavel (advisor)
The aim of my thesis is to understand the manufactured thermostats and design own thermostat to allow the most basic possibilities classical thermostats plus setup and management via web interface. It is a realization of a small web server that works closely with hardware peripherals. In addition, the web interface is still possible to manage a Web server of TFT LCD screen or applications for smart phone with Android. In addition, the thermostat allows the temperature reading from the BLE modules. All temperatures are continuously stored in a database and graphically processed.
|
|
Automatic control system of technology facility
Brabec, Luboš ; Šmirg, Ondřej (referee) ; Hubálek, Jaromír (advisor)
This bachelor's thesis deals with problematics of technological procedures and techniques for modification of microelectrodes with nanostructures. Furthermore, it describes a device needed for automated production of nanosensors, their properties and communication with computer. These devices communicate through RS-232 and USB interfaces.
|
|
Thermostat for measuring passive component controlled of AVR
Demjanics, Ferenc ; Koňas, Petr (referee) ; Roubal, Zdeněk (advisor)
The aim of this work is to familiarize with the design of the thermal test chamber to measuring passive components. Show features and involvement of selected circuits that ensure reliable operation of the device. For the realization of the role are the most important the Peltier cells and temperature sensors. But they can not work without the control unit. The control unit provides the necessary communication with each component and also with user. For this purpose we made a selection of suitable type of microcontroller and communication equipment (matrix keypad, LCD, buttons and LEDs). Subsequently was designed the algorithm to control the thermostat suitable for using in students training. The algorithm was written in the microcontroller in form of a program. There is also implemented a PSD controller in the program, which evaluates the data collected by a sensor. Then set the correct function of Peltier cells. After the thermostat was designed and realized, test measurements were performed and the results were documented and evaluated.
|