|
|
The comparison of cutting tools for milling of dental impression made from materials Ti6Al4V ELI and CoCr
Bíba, David ; Zemčík, Oskar (referee) ; Dvořák, Jaromír (advisor)
The aim of this dissertation is the comparison of two chosen milling tools. Both milling tools are made of solide carbides and therefore the theoretical part deals with these materials. We compare the chemical composition as well as the milling tools materials. Next chapter deals with the geometry of the milling tools with semi-circular front blades cutting edges and comparison. In the last part of the dissertation we test the durability. The data gained by a micrometric method are interpreted in the graph. By means of this research we found out the impact on the suitably chosen geometry on splinters and wear resistance. It is possible to optimize the produced milling tools or to choose more suitable tool instrument on the basis of gained durability data.
|
|
|
Structure and Properties of Sintered Tungsten Carbides
Novotná, Hana ; Klakurková, Lenka (referee) ; Čelko, Ladislav (advisor)
This bachelor thesis deals with the structure and properties of sintered tungsten carbides. The literature review section concerns the development of sintered carbides, their composi-tion and structure, different types of carbides, the steps of the production of sintered car-bides, sintering technology and alternative materials for cutting tools. The experimental section deals with composition of WC-Co and is ascertained by the dependency coercivity on WC grain size and also on cobalt content. This work describes the measurement of WC grain size and measurement of the coercivity, one of the fundamental properties of sintered carbides.
|
|
|
Production and grinding/sharpening of cemented carbide tools
Prokeš, David ; Prokop, Jaroslav (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis concerns the description of rotary tools made of cemented carbides. Ce-mented carbides appear as wide range tool material with reference to ductility, hardness of material and relatively low cost. New knowledge of cemented carbide manufacturing has still improved mechanical characteristics of this material. Tools made of cemented carbides are made on modern 5 axis CNC tool-making grinder machines which can be easily set with grinding parameters and interaction with measuring tools for quick parameters changeover. All of these qualities are suitable for serial and also piece tools production.
|
|
|
The influence of PVD coating on tool life of cutting inserts during face milling
Jašek, Petr ; Fiala, Zdeněk (referee) ; Jaroš, Aleš (advisor)
This diploma thesis is aimed on durability of PVD and CVD coatings for symmetrical face milling. The theoretical part describes the characteristics of cemented carbides, milling technology and the characteristics of the coating methods. The experimental part describes the machine tool, used tools, workpiece material and cutting conditions. The aim of the work was to measure the cutting forces and tool wear during the milling. Based on experiment, it is clear that the PVD coatings with nano-layers achieves to the longer life in comparison with others and generally, that the using of coatings leads to reduction of cutting powers and lifetime was increased.
|
|
|
Coating methods for cutting tools
Novotný, Michal ; Dvořák, Jaromír (referee) ; Humár, Anton (advisor)
The bachelor thesis titled Coating methods for cutting tools describes techniques of deposition of hard abrasion resistant coatings by physical and chemical methods. The thesis contains the partition of the materials for cutting tools, description of producing cutting inserts made from sintered carbides, basic types of coating layers and comparison of coated sintered carbides in the assortment of selected manufacturers. There is also an outline of some trends in the area of coating methods at the end of the thesis.
|
|
| |
|
|
Coating methods for cutting tools
Doležal, Jan ; Madaj, Martin (referee) ; Humár, Anton (advisor)
Bachelor work describes methods of coating of cutting tools and their technical characteristics. The work is given below the current product range of manufacturers of coated cemented carbides. At the end of this work is treated the development of coating cutting tools and types of applied coatings.
|
|
|
Service life increasing of spare part tools for ground cultivation
Černín, Jiří ; Mrňa, Libor (referee) ; Sigmund, Marian (advisor)
This diploma thesis deals with increasing the service life of parts intended for soil cultivation. The work evaluates the current possibilities of increasing the utility value of spare parts. Practical tests will provide recommendations for the most appropriate method to increase durability. The work examines uncharted methods of testing soldered joint. The results are evaluated in terms of quality and economic profitability. All results from this work are based on the basis of practical tests of plowing machine in rocky soil.
|
|
| |
|
| |
guest ::
