|
|
Library and leisure centre in Slavkov u Brna
Korábková, Adriena ; Sukop, Lukáš (referee) ; Ostrý, Milan (advisor)
The main goal of this Master’s thesis is the elaboration of project documentation for a library and leisure centre in Slavkov u Brna. The project is divided into three parts. The first part is focused on architectural and structural design. The building will have two floors and a flat roof. The leisure centre will be located on the first floor and the public library on the second floor. The load-bearing walls will be made of aerated concrete blocks. The floor and roof structures will be made of reinforced concrete. The facade will be designed as ventilated. The second part of the thesis is focused with the design of selected building services: HVAC, rainwater management, lighting and photovoltaics. The building will be mechanically ventilated. Space and domestic hot water heating will be provided by heat pumps (air / water). Rainwater will be collected and used for irrigation. Electricity consumption will be partly covered by a photovoltaic power plant from the flat roof. The third part of the thesis is focused on the evaluation of the building in terms of the multicriteria analysis method. For this evaluation the national methodology SBToolCZ is used.
|
|
|
Community Center for Seniors
Fišarová, Jana ; Valenta, Michal (referee) ; Rusinová, Marie (advisor)
The subject of my diploma thesis is a proposal of a new community center for seniors near Brno in the village Pravlov. The building is designed for 12 people in 11 separate housing units. The building is divided into three floors. On the ground floor there are civic amenities (doctor's office, hairdresser) and technical facilities (utility room, cleaning room, facilities for employees). On the second and third floors there are separate apartments 1 + 1 and 1 + kk. Vertical walls are made of aerated concrete blocks, horizontal structures are made of reinforced concrete monolithic ceiling structures. The vertical connection between the individual floors is created by a prefabricated staircase. The community center for seniors is covered by a vegetation roof and part of the building is covered by a flat roof. On the south side of the building is located balcony.
|
|
|
Multifunctional Building in Jičín
Imlauf, Vítězslav ; Pilinszki, Martin (referee) ; Beneš, Petr (advisor)
The subject of the thesis is the design of a multifunctional building in Jičín, which includes underground parking garages with cellars, technical facilities, administrative parts, commercial premises, medical facilities and apartments. The building is a five-story detached building with a full basement. The floor plan of the building is an irregular polygonal shape approaching the letter L. The structural system of the building is designed as a combined monolithic reinforced concrete skeleton with reinforcing reinforced concrete wall cores and ceilings. The foundation structures are made up of a foundation slab with foundation belts made of waterproof concrete placed on drilled piles. The roofing consists of a single-layer flat vegetation roof. The perimeter shell of the above-ground floors is designed from aerated concrete blocks with a contact insulation system made of mineral basalt wool.
|
|
|
Energy-saving building of a family house in Třebíč
Kousalíková, Jana ; Počinková, Marcela (referee) ; Blasinski, Petr (advisor)
The aim of the bachelor’s project is to design a detached passive house. The project is focused the structural and architectural design, the design some of building services, building physics and fire safety of building. The plot is situated in the south of Třebíč and terrain is almost flat. The entrance to the plot is in the north and the entrance to the house is in the west. The house has two floors and flat roof, the carport has flat green roof. On the first floor there is a wind lobby, cloakroom and utility room, hallway, guest room, bathroom and big open space which includes kitchen and living room. On the second floor there are three habitable rooms: bedroom, two children’s rooms, bathroom, toilet and two dressing rooms. The structural system consists of masonry walls. External walls are form sand-lime blocks with ETICS, load-bearing walls are from sand-lime blocks and partitions are from aerated concrete blocks. The floor slabs are from prestressed hollow core slabs and the building is based on strip foundations and permanent formwork blocks. The building services which are designed in this project are heating, mechanical ventilation, electricity service cable and stormwater management. In the house there is a mechanical ventilation unit with heat recovery. Heating is provided by air source heat pump and the stormwater is stored in the accumulation tank. Stormwater will be used to watering the garden and the excess of stormwater will be infiltration into the soil. Part of the electricity is provided by photovoltaic panels on the flat roof. The part of project is certificate of energy performance of building, rating of construction for heat conduction, acoustics, daylighting and their assessment with legislation.
|
|
|
Apartment building in Kyjov town
Vlach, Adam ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The subject of the bachelor's thesis is processing of design documentation for the construction of an apartment building. The thesis contains a graphic and textual part. The graphic part contains individual drawings, which are an essential part of the design documentation for the construction of a building. The text part contains technical reports on the given object, lists of used compositions and elements, and assessment reports of building physics. The proposed apartment building is located in a newly emerging construction site on the outskirts of the Kyjov town. It is a basement building with four above-ground floors covered with a warm flat roof. The apartment building is divided into eight apartment units, which are accessible from the north-facing access gallery. The individual floors of the access gallery are connected by a double-arm reinforced concrete staircase and an elevator shaft with a traction elevator. The terraces of the individual apartment units are oriented towards the south. There are 1-bedroom, 2-bedroom, 3-bedroom and 4-bedroom apartments in the building. The basement of the building is used for home amenities of the apartment building and for three separate garages with one parking space. Structurally, the object is designed mainly as a masonry of aerated concrete blocks and sand-lime blocks in combination with monolithic reinforced concrete structures. The building is based on monolithic reinforced concrete strips. The wall structures of the basement, the structure of the access gallery and the floor structures are designed as monolithic reinforced concrete structures. The external wall constructions are insulated with a contact insulation system made of stabilized polystyrene with a thickness of 200mm thermal insulation. The object is visually divided into simple blocks with a color solution in shades of gray. The facade of the building is supplemented with a facade trellis with climbing plants. In addition to drawings and technical reports, an assessment reports of fire safety and also an assessment reports of building physics are made for the proposed object. All assessments meet the given requirements.
|
|
|
Detached house
Nejedlá, Anna ; Chomová, Štěpánka (referee) ; Jelínek, Petr (advisor)
The bachelor's thesis on the topic of a family house deals with a part of the project documentation for the construction implementation. The family house is located on a slightly sloping plot in Boršov nad Vltavou, near České Budějovice. The building consists of two above-ground floors and a partial basement. The structural system of the partial basement is designed with calcium silicate bricks. The residential part of the building is constructed with aerated concrete blocks and covered with a gable roof. The ceiling structure is made of monolithic reinforced concrete. The house is designed as a single housing unit for a four-member family.
|
|
|
Energy-efficient hotel building in Karviná
Segeďa, Petr ; Rubinová, Olga (referee) ; Počinková, Marcela (advisor)
The aim of the master’s thesis is to design an energy-efficient hotel in Karviná. In the first part, an architectural and structural solution was proposed. The building has three above-ground storeys. The structural system was designed as structural frame with beams and slabs, made of reinforced concrete. The material of external wall is aerated concrete blocks insulated with the ETICS with poly. The roof is flat. There are 40 thermal collectors and 69 photovoltaics panels. On the first floor, there are four guest rooms, a restaurant, a kitchen, a reception, toilets, a utility room, a mechanical room, and facilities for employees. The guest rooms are located on the second and third floor. HVAC was designed in the second part. Heating is provided by two heat pumps. The first heat pump provides domestic hot water in the winter, heating with radiators, for air handling unit heaters and cooling in the summer. The second heat pump is used only for floor heating in the winter. In the building are designed four air handling units for the kitchen, the restaurant and two for the guest rooms. Rainwater from the roof is collected in accumulation tank for flushing the toilets. In the third part, I evaluated the calculation of energy performance certificate in two softwares, namely Energie 2021 and DEKSOFT. The aim to find out, why the results are different in these softwares. The Drawings were done in ArchiCAD. The calculation part was made in Excel.
|
|
|
Multipurpose Educational Centre
Drahokoupilová, Barbora ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The objective of my diploma thesis is to design multipurpose educational centre. The project consists of three parts. The aim of the first one is to create the architectural and structural design. The building is mainly centred around four common rooms accompanied by a simple kitchen and basic amenities. It is a two-storey building with a green roof. Its floor area is 327 m2. The vertical load-bearing structures are masonry, specifically made of aerated concrete blocks. The horizontal load-bearing structures are designed as cast-in-place reinforced concrete slabs. Envelope walls are insulated with mineral wool because of its elliptical floor plan. The foundation is cast-in-situ concrete slab. The second part focuses on a building services design. Domestic hot water and heating is provided by a gas boiler and electricity is partly supplied by a photovoltaic system. The building has mechanical ventilation with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden. The third part relates to facility management. It focuses on facility operations and core and non-core activities.
|
|
|
Apartment building
Danielová, Marie ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of the bachelor’s thesis is to processing of the design documentation for a newly-built apartment building. The apartment building is located in Havlíčkův Brod. The building has four above-ground floors and one basement. In the basement there are cellars, technical facilities, a common room, a bicycle room and a cleaning room. There are 8 residential units on the upper floors. The apartments on the ground floor are wheelchair accessible. The apartments on the second to fourth floor have their own balcony. On the second floor there is a common terrace. The apartment building is based on strip foundations made of plain concrete. External walls in the basement are made of calcium silicate blocks and the external walls of the above-ground floors are made of aerated concrete blocks. The floor structure is prefabricated structure, which is made of reinforced concrete beams and aerated concrete inserts. The roofing of the building is made of a vegetation single-skin flat roof. The building is insulated with the ETICS contact insulation system.
|
|
|
Guesthouse "U ODry"
Spáčilová, Kristýna ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis is the project documentation of the new building - pension U Odry in Přerov-Kozlovice. Accommodation capacity is 36 people. In the pension there is also restaurant. The building is designed as a three-storey. On the first floor there are rooms for guests entering the accommodation facility, facilities for accommodation, technical facilities of the building and the restaurant, including premises for its operation. There are guest rooms on the second and third floors. The bases are made up of strip foundations. The external loadbearing mansards and partitions are made of YTONG lightweight concrete blocks. The internal loadbearing masonry is made of SILKA lime-sand blocks. The ceiling structure is designed from SPIROLL prestressed concrete floor slab. The roofing of the building is solved using flat vegetation roofs.
|
guest ::
