|
|
Design of bridge on highway D1
Kopřiva, Jan ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The purpose of this thesis is to design bridge over the valley on D1 highway. Length of the structure is 170 meters. Main structure is four spans prestressed beam. The length of fields is 36+48+48+36 meters. The structure is examined in all phases of construction, including the operating phase according to valid standards.
|
|
|
Office Building
Pospíšil, David ; Mazánek, Pavel (referee) ; Košíčková, Ivana (advisor)
My thesis solveses the office building. The building will be located in Šumperk. It will be located near the center. The building has two floors and a partial basement floor. Ceilings are beams with ceramic inserts and reinforced concrete slabs. Vertical structure consists of a ceramic blocks in the aboveground parts and concrete blocks in the underground section. The roof is walked on vegetation. The staircase is reinforced concrete, monolithic. The entire building is insulated with mineral wool. Basement is insulated with polystyrene foam.
|
|
|
The timber viewtower
Lecián, Martin ; Straka,, Bohumil (referee) ; Buchta, Stanislav (advisor)
The master's thesis deals with design and static assessment of loadbearing structure the timber viewtower on the hill Hostyn. The shape of the structure is very close oblate spheroid. Towers plan shape is a regular octagon whose outer diameter varies along the height. Tower in the footing and in the top measure 10,5 meters, at mid-height measure 6.5 meters. The height of the viewtower is 35 meters and view floor is located at a height of 30.5 meters. The main structure of tower consists outer towers curved wooden columns and interior steel column. Columns support the horizontal beams and bracing provide rigidity of the structure. The roof has a pyramid shape towers and tends to 17 °. Outer columns are designed from glued laminated wood GL24h, others carrying wooden beam are designed from solid timber C24 steel rods are designed from steel S235. Connections are solved using steel components. The work includes structural calculation, technical report and drawings.
|
|
|
Roof Structure of Collection Yard
Sýkora, Jiří ; Štrba, Michal (referee) ; Pilgr, Milan (advisor)
The roof structure has plan dimensions of 9.15 m in width and 38.4 m in length, the height of the structure is approximately 5.9 m. The planar load-carrying system in the transverse direction consists of a fixed column and a beam with a slope of 8°, which is supported by the column both directly in the middle of the length and by means of hinges in quarters of the length. These transverse support systems are spaced at 6 m intervals. The roof cladding made of profiled steel sheeting metal is supported on plain purlins placed perpendicularly on the load-carrying system. The spatial rigidity of the structure is ensured in the transverse direction by the fixed of the columns and in the longitudinal direction by the truss bracing. The supporting structure consists of hot rolled steel profiles.
|
|
| |
|
|
The multistorey office building
Bílek, Tomáš ; Sýkora, Karel (referee) ; Šmak, Milan (advisor)
Design of a new steel structure administrative building in Zlín. Structure is consist of three parts. The part A is designed of three fields in the transverse direction and five fields in the longitudinal direction. This part is two-storey. The part B is designed of two fields in the transverse direction and three fields in the longitudinal direction. This part is six-storey (five-storey). The part C is designed of two fields in the transverse direction and five fields in the longitudinal direction. This part is four-storey (three, two-storey). In both directions in all parts of the building is the distance between the columns in all fields of 6,0 meters. Structural elevation of all floors is 3,5 meters. Shape and dimension design. Fixed, utility, climatic load. The purpose is confrontation of inner forces and dimensioning of main supporting elements in three variations of structure. Comparsion of variations. More detailed static calculation, drawings for the selected variant. Detailed drawings for part of building.
|
|
|
The multipurpose building in Pardubice
Tunková, Eliška ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
The topic of my diploma thesis is a design of a construction of a multipurpose building. The floor plan is of irregular shape with a maximal span of 35 metres. There are two buildings in shape of a hexagon, to which another building in shape of a half of a hexagon is connected. Part of the building is designed as a two-storey building and all parts are different in height. The hight of the designed building in its highest point is 13,5 metres. The load-bearing structure consists of glued laminated wood elements and raised wood with steel elements used as fasteners. The construction is designed alternatively from wood and steel. The static solution was made using the RFEM software.
|
|
| |
|
| |
|
|
The Viewing Tower in Brdy
Kováčová, Kristýna ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subjekt of this thesis is a design of a viewing tower located in the area of Brdy. The structure has been created as a 3D model, the internal forces have been calculated with the use o finite element method in a structural engineering software Scia Engineer 15.1. Based on the knowledge of theses forces the design of the structural systems has been done. The materials used on this construction are glued laminated timber and steel. The height of the tower is 25,725 m. The floor plan is a shape of a circle and fluctuating smaller with the gaining height. The main structural systém consists of 8 curved posts which are radiály situated on the circular floor plan. The tower has 3 observational platforms.
|
guest ::
