|
|
Production quality management
Banatová, Radomíra ; Nejezchleb, Lubomír (referee) ; Bartes, František (advisor)
This masters thesis considers the proposal for quality improvement of an industrial process. Established methods and proccesses according to valid ISO standards are described here. There are recommended proposals and methods for improvement of current situation of processing On the production of provided informations here.
|
|
|
Statistical methods in quality management system.
Vyškovský, Jaroslav ; Toul, Jiří (referee) ; Fiala, Alois (advisor)
Statistical methods in quality management system are strong tools, which helps us to make right resolutions in area of quality management, or in other possible areas, such as process control, or in assessing of specific parameters in company. In these respects we are using various norms, manuals and publications such as ČSN EN ISO 9001, ČSN EN ISO 9004 a ČSN ISO/TR 10017. In the beginning part of work we are gradually dealing with basic phraseology from area of statistical methods, next we continues with management and with process, SPC, description of basic statistical methods and in the end by data. Goal of this work is literature exploration of facts and own conclusion connected with predict of progress in these area.
|
|
|
Performance and quality assessment according to model ISO
Marešová, Simona ; Ing.Jiří Kopáč (referee) ; Kocmanová, Alena (advisor)
The diploma thesis focuses on the quality management system in selected company and presents the differences between current standard ČSN EN ISO 9001:2008 and new standard ČSN EN ISO 9001:2015. This diploma thesis analyzes current state of selected company with respect to the current requirements and focuses on new mandatory requirements that are essentially during the implementation process of the new quality system in relation to the new standard.
|
|
|
Proposal nozzle for measuring the air quantity of an internal combustion engine
Esterka, Ondřej ; Charvát, Pavel (referee) ; Štětina, Josef (advisor)
In this bachelor‘s thesis are mentioned emission standards, which apply to passenger cars, and the mixture-control system. There is also a research of volumetric and sectional flowmeters, suitable for measuring the flow volume of the air, including the principle of measuring the volumetric or mass flow. After that follows engineering design of Venturi tube for measuring the flow of the air through the chosen combustion engine. The design is based on the appropriate standard. There is also involved a welded assembly drawing of the Venturi tube, and a description, how to use the tube in a test room.
|
|
| |
|
|
Comparison of design classic and smart wiring of house
Valo, Marek ; Novotný, Jan (referee) ; Bátora, Branislav (advisor)
This work contains requirements for the design of high-voltage and low-voltage classic and smart wiring. The aim of this work is to implement a project of classic and smart wiring for house and their subsequent comparison. In the beginning is introduction to wiring as such, insight into history, a brief presentation of contemporary species of wiring. The following chapter provides an analysis of high-voltage systems and criteria in its designing, which is based on the currently valid standards. The chapter contains also a brief excerpt dealing with ways of storing wires in buildings and installation zones individual rooms. Chapter of system wiring briefly describes the idea of this kind of wiring and its function. Introduction is focused on explanations of the system wiring, then the chapter directed to a specific producer used in the design of the project itself. In the chapter number five the problem of low voltage wiring and methods for their design are analysed. The following section deals with the design of wiring own project (classic and system) for a family house, designing switchboard, budgeting and technical reports. In conclusion, these two types of wiring are compared in terms of design, project documentation and budget. The practical part is dedicated to creating drawings containing high-voltage and low voltage wiring, switchboard scheme, budget, calculating illuminance and technical reports. The project documentation is discussed further in the technical report.
|
|
|
Preparation of diagnostic laboratory for accreditation
Mačišáková, Kateřina ; Polsterová, Helena (referee) ; Jandová, Kristýna (advisor)
This diploma thesis deals with the topic of accreditation of a diagnostic laboratory. It analyses theoretical knowledge in the field of accreditation, accreditation agency and its history. It contains a list and sample of documents required for accreditation and a description of the process. Part of the work is also a description of the requirements arising from the standard ČSN EN ISO / IEC 17025. The work briefly introduces the company whose laboratory is to be accredited. The following are the technologies the company uses and wants to accredit. The main part of this diploma thesis is the Quality manual, which was created with all needed attachments. This Quality manual is the most significant document, which is necessary for the process of accreditation.
|
|
|
Quality management of construction
Černý, Jaroslav ; Skalický, Roman (referee) ; Nováková, Jana (advisor)
Master thesis describes the basic concepts and principles of planning of the quality of the contruction project. The theoretical part describes the general quality management and quality management in the construction company. In the practical part is created an inspection and test plan for construction of the family house Skalice.
|
|
|
Methodology of identification of revisions and inspections of technical equipment for a manufacturing company based on the requirements of ISO 45001
Valenta, Jakub ; Jandová, Kristýna (referee) ; Bača, Petr (advisor)
This work deals with the issue of inspections and revisions of technical equipment according to safe operation standards on the basis of OSH and FP requirements. In the introduction, these fields of work safety and fire protection are described, which will be used in later parts of the work. Subsequently, the term „technical equipment“ and subcategories of this issue are defined, with each of the subcategories being specifically approached. As a result, the thesis describes why it is necessary to regularly inspect the technical equipment, while the individual types of inspections are subsequently defined. This is accompanied by the distribution of the person’s rights to carry out individual inspections and the distribution of responsibility for the inspections carried out. The acquired knowledge is then used to create a model of the process of regulation of inspections and revisions and to create an overview of periodic inspections and revisions of technical equipment for a manufacturing company. This model and review of inspections are then considered the output of this bachelor’s thesis.
|
|
|
The Introduction of Information Security Management System in IT Enterprise
Riegl, Tomáš ; Sedlák, Petr (referee) ; Ondrák, Viktor (advisor)
This thesis deals with the introduction of information security management system in IT enterprise. It includes theoretical knowledge which are necessary for the understanding of this issue and their application for the analysis of the current state of information security, risk analysis and risk management. Last but not least for the actual implementation of information security management system in the company. The implementation of ISMS was divided into two phases. This thesis details the first phase.
|
guest ::
