|
|
Experimental reactors for combustion of biomass and municipal solid waste
Bialožyt, Michal ; Juřena, Tomáš (referee) ; Recman, Milan (advisor)
The main purpose of this thesis is background research about experimental reactors for combustion process research. Mainly semted on reactors with fixed bed for alternative fuels, such as biomass and municipal solid waste. Mathematical modeling of the combustion process with modern software products and its optimalization is not possible without input data gathering from these facilities. Thesis should serve as a source of information for building a new experimental reactor.
|
|
|
Analysis of slope prone to sliding
Píchová, Sylvie ; Erbenová, Alexandra (referee) ; Paseka, Antonín (advisor)
The diploma thesis illustrates landslide investigation, geophysical and engineering-geological landslide survey and landslide stability reconnaissance. Static calculations based on FEM were performed in the GEO5 program. A back analysis of the landslide mathematical model was executed, which resulted in the reliability of the static landslide assessment. The complicated stabilization construction of the pile and micropile walls were optimized by mathematical modeling of successive phases of construction. The method of execution of construction work during the landslide rehabilitation was designed as well as the dimensions of reinforcing structures.
|
|
|
Hydraulic analysis of the Tvarožná water supply system
Trněná, Eva ; Sucháček, Tomáš (referee) ; Ručka, Jan (advisor)
This bachelor thesis deals with the hydraulic analysis of the existing water distribution system of Tvarožná village. The thesis is divided into several parts. The first part introduces the purpose of the work. The second part focuses on mathematical modeling of water distribution system, hydraulic analysis of water distribution system, describe Epanet 2.0 software that was used for modeling and review the current research on mathematical modeling of water distributions systems. The third part of the thesis analyzes in detail the studied area and describes drinking water distribution to the municipality. The fourth part describes the measuring campaign in the locality and its evaluation, which was subsequently used for the model construction. The fifth part describes the input data and the procedure for the model settings in the software Epanet 2.0. The results of the hydraulic analysis are the pressure conditions in the water distribution network, which are compared to the actual valid legislation. Also the hydraulic capacities of the fire hydrants and their location in the municipality are compared to the standard requirements.
|
|
|
The study of the energy performance of buildings with controlled internal temperature
Karmín, Luboš ; Čermák, Jan (referee) ; Šťastník, Stanislav (advisor)
In this thesis is summarized close topic about buildings with controlled internal temperature, especially cold stores. These objects have one of the biggest energy consumption among all structures. The goal of this thesis is to write down standard requirements for the construction of cold stores and summarize process that have a significant effect on overall consumption of energy in this type of structures. Calculations made in this thesis review changes in physical properties of surface emissivity PUR panels which are directly exposed to sunlight. Option of shielding of solar load is included as well. Researched data could be base for continue in studying of the topic and design of future saving optimization of cold stores etc..
|
|
|
Calculation of pressure losses of flue gas ducts using mathematical modeling
Suchý, Václav ; Skála, Zdeněk (referee) ; Pospíšil, Jiří (advisor)
This diploma thesis deals with the calculation of pressure losses in the flue gas ducts. First part of this work describes properties of flue gas and flow dynamics. Part of the theoretical analysis was detailed study of pipeline elements with emphasis on the reasons for the existence of pressure loss in the flow, calculations of the resistance coefficients and possible methods of reducing the losses. In the practical part, a model of the pressure loss calculation of the existing flue gas line installed in the incineration plant was created. At the end of the thesis a proposal for optimization of this route was made with emphasis on the reduction of the overall pressure loss. By optimization the pressure drop of the specified route was reduced from 3581 Pa to 2647 Pa, i.e by 26% and the required power input of the fan was reduced from 225 kW to 166,5 kW.
|
|
|
Modeling of water quality in the water supply network
Dukát, Petr ; Rajnochová, Markéta (referee) ; Ručka, Jan (advisor)
This thesis looks at water quality modelling in the water network, focusing on water age. The initial part of the work identifies the factors that lead to an increase in water age in water supply networks. The theoretical part of the work presents the mathematical relationships and logistical steps that software tools apply to simulate water quality indicators in a water supply network. In the practical part of the work, a hydraulic model of a water distribution system with a total length of 302,1 km was constructed. Measurement campaign was carried out to calibrate and verify created hydraulic model. Using this hydraulic model, water age for existing and possible scenarios was simulated. The results of the work have revealed parts of the water supply network containing high water age and are intended to encourage the progressive water distribution systems management philosophy.
|
|
|
Mathematical models of retention object of urban drainage
Pavlík, Ondřej ; Stanko,, Ing Štefan (referee) ; Pollert,, Jaroslav (referee) ; Prax, Petr (advisor)
This work deals with the use of 3D mathematical models of fluid in water management practice. Using 3D mathematical model was assessed retention tank Jeneweinova, which is situated on a sewer network of the city of Brno and is an important object of urban drainage. Retention basin designed to keep overflow from CSO chambers to Svratka and Svitavský náhon during storm events. Retention tank Jeneweinova is suitable for the assessment, because tank was designed bassed the Master Plan drainage of Brno using 1D mathematical model. Another factor was the physical model, which was build in LVV Vin FAST BUT. And finally, near the retention tank will be installed measurement on the sewerage network, which will be able to verify the results whitch has been predicted in this work. Mathematical model of retention tanks Jeneweinova was build in software FLOW-3D. FLOW-3D is a general purpose CFD (Computational Fluid Dynamics) software for flow of fluid in steady and unsteady mode and uses computational techniques to solve the equations of motion of fluids. This software is mainly used for the calculation of hydraulic fluids, gas flow and heat transfer simulations. Results from 3D mathematical model has been compared with the values in the physical and 1D mathematical model.
|
|
|
Cleaning effect of unconventional filtration materials
Fialová, Tereza ; Hynánková,, Eva (referee) ; Kriška-Dunajský, Michal (advisor)
Constructed wetlands and the soil filters are water treatment devices using the filter material that in most cases consists of natural river gravel, coarse sand or crushed stone. Master´s thesis deals with the research of cleaning effect of unconventional filtration materials, or more precisely with examination to load real waste water in a filtration column, to prove their ability to be used as an alternative medium that can ensure better cleaning effect. For the research work following metallurgical industry materials were used: fine slag and coarse slag 8-16 mm, materials from the natural character: zeolite, keramzit, a plastic material: PUR-foam. Also the traditional materials of fine gravel and coarse gravel were tested to compare the cleaning efficiency. Both the hydraulic and the cleaning efficiency of all above mentioned materials were tested. The examined hydraulic parameters are particularly porosity, hydraulic conductivity and suspended solids, turbidity and oxidation-reduction potential of both the inflow and outflow of the filter columns were determined. Accredited laboratory set the inflow and outflow of the filter columns BOD5, CODCr, total phosphorus, total nitrogen, nitrite, nitrate, ammonia and dissolved oxygen. By evaluating the results of the measurements it is determined which materials are suitable to be applied in the constructed wetlands and the soil filters. This filtration column was modeled by program HYDRUS and the result was compared with real results.
|
|
|
Optimization Models of Risk in Energy Systems
Tetour, Daniel ; Cabalka, Matouš (referee) ; Popela, Pavel (advisor)
The diploma thesis deals with mathematical modeling of the resource allocation problem in an energy system with respect to technical parameters of the used resources. The model includes random input variables affecting the amount of demand and constraints related to associated risks. The thesis addresses control of the operation of various types of boilers and also extends the system with a heat storage tank examining its impact on the behavior of the system and achieved results. The optimization model is based on a multi-period two-stage scenario model of stochastic programming and works with simulated data, which combines real data, statistically determined estimates, and the use of logistic regression. The implementation utilizes GAMS software. When comparing the achieved results with the current state, it was found that the heat storage tank has a positive effect on the function of the system as it allows for extended usage of the cheaper unregulated sources by storing surplus heat, and thus helps to reduce the overall costs of the system.
|
|
|
Mathematical modelling of mechanical systems
Kamarýt, Petr ; Čermák, Jan (referee) ; Šremr, Jiří (advisor)
This bachelor thesis deals with mathematical modelling of mechanical systems. In the first two chapters Lagrangian mechanics and system of ordinary differential equations are summarized. In the third chapter equations of motion of double pendulum are derived. Approximative system, special cases and sensitivity of solution to non-linear system on initial conditions change are further analysed.
|
guest ::
