|
|
Apartment house Uhřice
Gajárková, Marie ; Skřeková, Tereza (referee) ; Petříček, Tomáš (advisor)
The aim of bachelor thesis is to elaborate the project documentation for realization of new apartment house located in the village Uhřice. The designed apartment building is located in the village of Uhřice which belongs to the cadastral area of Kyjov. The three-storey building is located on the outskirts of the village, near the forest in a sloping terrain. There is also a parking lot for five cars on the site. On the first floor, there is a garage for five more cars, technical room, cellar, utility closet, and baby carriage room. The apartment building is designed with five residential units, designed as one-bedroom, two-bedroom and three-bedroom apartments. The building is designed on foundation strips and footing. The exterior masonry on the first floor is made of lost formwork and, on the other floors, it is made of ceramic blocks. The ceramic blocks are also used for load-bearing internal masonry. The interapartment masonry is made of acoustic blocks. Reinforced concrete was chosen to construct stairs and ceiling structures. The roof structures are single-skin flat roofs. The lower roof serves as a terrace, the other is covered with aggregate
|
|
|
Apartment building
Poledníková, Hana ; Navrátil, Michal (referee) ; Kacálek, Petr (advisor)
The aim of bachelor thesis is to elaborate the project documentation for realization of new apartment house located in the town of Krnov. The new detached apartment house has 4 floors, detached and has basement. Roof is covered with a non-walkable skin flat roof and a waterproofing layer made of asphalt strips. The object has basement where are spacious cellar rooms which belongs to each apartment. The building includes 5 apartments about different sizes. 2 bedrooms with kitchen, 3 bedrooms with kitchen and 4 bedrooms with kitchen. The garden terraces, balconies and spacious roof terrace are part of house. The construction system is designed as a brick, transverse, wall is made of cut brick blocks and formwork. The ceiling construction contains girder and brick inserts with poured concrete. The contact thermal insulation system ETICS is installed in facade of building. Facade with white surface plaster and with a dominant lining of tape imitating bricks. The building is based on foundation strips.
|
|
|
Apartment building
Malyjurek, Jakub ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The aim of the bachelor´s thesis is to elaborate a project documentation designated for construction of the apartment building located within the terriotry of Jablunkov town. The building plot is situated in the marginal area of this town. The building is projected as a separate unit including three above-ground floors with a cellar. The object has a constructional wall system from ceramic blocks. The construction of the ceiling and the roof is made of monolithic plates. The roof is covered with a single flat roof. The basement includes cellars for the residents, boiler room, clubhouse, cleaning room and technical room. On the above-ground floors there are located six residential units in total (there are two units in each of them). There is designated one unit for people with lower mobility on each floor. The size of each residential unit is projected as four-room flat.
|
|
|
Multifunctional building
Dvořák, Pavel ; Šobrová, Zdena (referee) ; Utíkalová, Ivana (advisor)
The aim of the diploma thesis is to elaborate project documentation of a new-build mixed-use building in Moravske Budejovice, in the cadastral area of Moravske Budejovice. The mixed-use building comprises a partial cellar and three floors above the ground. In the cellar, technical facilities and storage space for the residental part of the building can be found. The ground floor and the part of the first floor are designed for commercial premises, a hairdresser's, a florist's, a bookshop and a café. Residental unit consisting of three flats is located on the first and second floor. the building is made from 300 mm thick ceramic construction blocks with the external thermal insulation system. Ceiling construction is made of 250 mm thick concrete monolithic panels. Furthermore, the documentation deals with potable water, electric power and gas couplers, sewerage system, rainwater sewer and paved surface for pedestrians and motor vehicles. The thesis is elaborated as documentation for the building execution.
|
|
|
Detached house with the coffee bar in Liberec
Rajdlová, Ivana ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The bachelor thesis deals with the project of a polyfunctional detached house with coffee bar in Liberec. The detached house has three above-ground floors and a partial cellarage. There are two housing units in the building, on the ground floor is a buisness space for a cafe. The facility part is separated from the residential part and it´s operation is provided by the residents. The entrance to the house is located on southeast part of the object. The building has a shape composed of rectangular parts and is covered with a single-layer flat roof. Residential rooms are oriented to the southwest. The detached house is designed from a single masonry system. The vertical constructions are made of Porotherm ceramic pieces. Horizontal constructions are also in Porotherm system. During processing, emphasis was placed on layout solutions, architectural appearance, statics requirements and safety of use.
|
|
|
Sports and wellness center
Libřický, Zdeněk ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The final thesis is focused on the design and elaboration of the project documentation of the sports and relaxation center. The proposed building is located in the south-eastern part of the town of Hradec Králové, in a location supposed for buildings and areas of sports and relaxation use. It is a three-storey building with a flat roof and partial basement. The construction system is wall-mounted with a combination of skeleton. The building is based on plain concrete and reinforced concrete foundation footing. The peripheral, supporting and partition walls are designed from ceramic blocks POROTHERM. The inner load-bearing elements consist mainly of reinforced concrete columns. The ceiling structure is designed from reinforced concrete slabs supported locally. The perimeter walls of the first overground floor and part of the perimeter walls of the basement are insulated by an external contact thermal insulation system. The thermal insulation of the perimeter walls of the second floor is designed by means of a ventilated facade with facade tiles except the squash courts and the relaxation area. The building is functionally divided into three main parts, where the central part forms an entrance hall with comunication spaces of all floors. In this part a basement with technical facilities is designed. The right part of the ground floor consists of a restaurant with a bowling alley and a kitchen with storage and hygienic facilities. As part of this section, a gym and exercise rooms for fitness exercises, spinning and TRX are designed on the second floor. The left part consists of two squash courts with the appropriate facilities and massage areas. There is also a relaxing facilities with a north-facing terrace on the second floor. There are also dressing rooms and hygienic facilities. The designed object is accessible for disabled people. There is a parking lot for 40 cars, 3 motorcycles, one bus and three barracks for cars.
|
|
|
Detached house with the hairdressing saloon in Zdiby
Klečková, Tereza ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The bachelor thesis deals with the project of a polyfunctional detached house with hairdressing salon in Zdiby. The detached house has three above-ground floors and a partial cellarage. There are two housing units in the building, along with the hairdresser’s facility on the ground floor. The facility part is separated from the residential part and it´s operation is provided by the residents. The entrance to the family house is from the north side of the building. The building has a shape composed of rectangular parts and is covered with a single-layer flat roof. Individual rooms are located in the building so that the living rooms are situated mostly to the South, ensuring that they are sufficiently sunny. The detached house is designed from a single masonry system. The vertical constructions are made of Porotherm ceramic pieces. The Spiroll ceiling panel is used for horizontal construction. During processing, emphasis was placed on layout solutions, architectural appearance, statics requirements and safety of use.
|
|
|
Sports center with restaurant in Holěšov
Fridrich, Michal ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.
|
|
|
Mixed-use building in Brno
Kopecký, Lukáš ; Mizerová,, Lenka (referee) ; Smolka, Radim (advisor)
This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.
|
|
|
Wellness hotel "Na Ovčačce" - Svatý Kopeček u Olomouce
Spurný, Martin ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.
|
guest ::
