|
|
Design of camera crane
Navrátil, Pavel ; Hutař, Pavel (referee) ; Koutný, Daniel (advisor)
This Master’s thesis deals with several variants construction design of camera crane. Two optimal variants are chosen with regard to practical usage. The thesis includes complete design of these variants with 3D models and strenght analyses. This analyses are processed by final element method. The first variant made based on technical documentation and it has worked for company Filmochod s.r.o..
|
|
|
Pillar jib crane
Manda, Pavel ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with the construction design of pillar jib crane with lifting capacity 1.300 kg, crane radius 3.000 mm and maximum lift 7.000 mm. The thesis contains design of supporting elements including strength analysis, assembly drawing of pillar jib crane and jib’s detail drawing. The thesis also deals with choice of suitable hoist.
|
|
|
Pillar jib crane
Dias, Aleš ; Řezníček, Milan (referee) ; Malášek, Jiří (advisor)
The aim of my work is conceptual design pillar jib crane including important strength calculations. Payload is 1500 kg and length jib is 4 000 mm. The pillar jib crane is working near the wall and angle turning is 180°. The work also includes the selection lifting gear with manufacturer´s catalog.
|
|
|
Pillar jib crane
Dias, Aleš ; Řezníček, Milan (referee) ; Malášek, Jiří (advisor)
The aim of my work is conceptual design pillar jib crane including important strength calculations. Payload is 1500 kg and length jib is 4 000 mm. The pillar jib crane is working near the wall and angle turning is 180°. The work also includes the selection lifting gear with manufacturer´s catalog.
|
|
|
Pillar jib crane
Flídr, Tomáš ; Malášek, Jiří (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with an construct proposal of derrick (crane) with these technical parameters: lifting capacity is 1000 kg, unloading lenght of its beam is 3000 mm, height of lifting is 7000 mm, maximum height of construction is 4000 mm. The thesis consists of strenght calculation for range of the main carrying components, suitable fittings, and technical drawings of this crane and blueprint of unloading device.
|
|
|
Jib type crane
Knapec, Tomáš ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor's thesis is the design development of jib type crane with single knuckle. The target of this thesis is to develop a technical report including important strength calculations, schematic hydraulic circuit design and creating complete drawings of jib type crane that is designed for installation on mobile devices. Desired parameters of this crane are allowing horizontal rotation in 360° a vertical between 90° and maximum load capacity 1 700 kg.
|
|
|
Wall crane
Zapletal, Petr ; Jonák, Martin (referee) ; Pokorný, Přemysl (advisor)
This bachelor thesis deals with the constructional design of wall crane with 2500 mm crane radius and lifting capacity 1000 kg. Thesis includes design of crane, the choice of components, control calculation according to applicable standards and choice of a suitable hoist and trolley. An integral part of the thesis is design documentation.
|
|
|
Tower Cranes Models Review
Kuděla, Jan ; Škopán, Miroslav (referee) ; Pokorný, Přemysl (advisor)
This Bachelor thesis is focused on tower cranes with a working range over 40 meters. These cranes are composed of specific sections. In the first part of the thesis a more detailed description of tower cranes is presented. Next topic, that is being discussed, is three structural types of tower cranes with upper turntable bodies that are being made nowadays. In the overview, present world producers of tower cranes are listed. Companies like Liebherr, Potain, Linden Comansa, Kroll and Raimondi are described in more detail. Lastly, different models of tower cranes from leading producers in selected parameters are being compared.
|
|
|
Manipulator for air component
Kaše, Vladimír ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
The bachelor's thesis has solved the design proposal of the mobile manipulator for the aero-aggregates.The goal is to design main carrier units. The design has been proposed by means of the project calculation and performing the check calculation. The manipulator is enabling manipulation with the aggregates up to the maximum height of 5 metres and maximum weight of 250 kg.
|
|
| |
guest ::
